Avermedia AVerDiGi SEB5108 Series User manual

®
AVerDiGi
SEB5108/5116 series
SEB5108 Lite/SEB5116 Lite/SEB5116+
Quick Installation Guide

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT
PRIOR NOTICE
i
THE INFORMATION CONTAINED HEREIN IS TO BE
CONSIDERED FOR REFERENCE ONLY
WARNING
TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE
WARRANTY VOID FOR ANY UNAUTHORIZED PRODUCT
MODIFICATION
Copyright ©2009
AVerMedia INFORMATION, Inc
All rights reserved
Reproduction without permission is prohibited

Content Table
Package Contents ...................................................................... 1
SEB5108 Lite .......................................................................... 1
SEB5116 Lite .......................................................................... 1
SEB5116+................................................................................ 2
Optional Accessories............................................................... 2
Hardware Installation .................................................................. 3
SEB5108 Lite .......................................................................... 6
SEB5116 Lite .......................................................................... 7
SEB5116+................................................................................ 8
Fist Time to Use DVR System .................................................... 9
Using the Virtual Keyboard ....................................................... 12
Familiarizing the Buttons in Preview Mode ............................... 13
To Playback the Recorded File ................................................. 14
Familiarizing the Buttons in Playback Mode ............................. 15
Playback Backup Video ............................................................ 16
Using the Remote Programs .................................................... 19
Familiarizing the WebViewer Buttons ....................................... 21

1
Package Contents
SEB5108 Lite
(1) (2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) SEB51108 Lite unit
(2) Quick Installation Guide
(3) Software CD (User Manual included)
(4) AVerMedia USB optical mouse
(5) Power adaptor
(6) Power Cord ( The power cord varies
depending on the standard power outlet of
the country where it is sold)
(7) SATA cable x 2
(8) Screws for HDD installation
SEB5116 Lite
(1) (2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) SEB5116 Lite unit
(2) Quick Installation Guide
(3) Software CD (User Manual included)
(4) AVerMedia USB optical mouse
(5) Power adaptor
(6) Power Cord ( The power cord varies
depending on the standard power outlet of
the country where it is sold)
(7) SATA cable x 2
(8) Screws for HDD installation

2
SEB5116+
(1) (2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) SEB5116+unit
(2) Quick Installation Guide
(3) Software CD (User Manual included)
(4) AVerMedia USB optical mouse
(5) Power adaptor
(6) Power Cord ( The power cord varies
depending on the standard power outlet of
the country where it is sold)
(7) SATA cable x 2
(8) Screws for HDD installation
i
If there is any damage, shortage or inappropriate item in the package contents, please
contact with local dealer
Optional Accessories
Remote control
DVI cable for SEB5116 series
(16CH Loop out)
Audio cable for SEB5116 series
Red cable: 16CH audio in
White cable: 1CH audio out
Black cable: 1CH MIC in
Audio cable for SEB5108 series
(Red cable: 8CH audio in
White cable: 1CH audio out
Black cable: 1CH MIC in)
IR extendtion cable
Rack ears

3
Hardware Installation
A. Install the hard disk
Follow the steps to install the hard disk:
i
For hard disk spec, please referring to
http://www.avermedia.com/AVerDiGi/Product/ →AVerDiGi EB Series →
AVerDiGi SEB5116+or SEB5116 Lite or AVerDiGi 5108 Lite →Hardware
Recommendations
The “compatible hard disks” indicated in the above recommendation list only means
that these commercially available hard disks were tested with AVerMedia® products
and functioned well under normal operation conditions. AVerMedia® does not
guarantee or provide warranties, explicitly, implied or statutory with respect to the
reliability of the hard disk function or its compatibility. In no event AVerMedia® shall
be liable for damages, with respect to any business interruption of clients, lost
profits, loss of programs or other data on your information handling system or
otherwise. This includes direct, indirect, incidental, special, or consequential
damages, resulting from the incompatibility caused by the usage of these hard
disks, even if AVerMedia® has expressly advised about the risk of such damages.
The entire risk arising out of the use of any information attached here with is borne
by the recipient.
Follow the illustrated instructions below to install the hard disk:
1. Loosen all screws (2 sides and back) 2. Push the cover backward and lift to open
the case cover.

4
3. Loosen the screws of holder to make hard
disk install more easily.
4. Loosen all the screws of hard disk plate.
5. The hard disk plate can be installed up to
3 hard disks. User can choose the position
and place the hard disk on it.
The power adaptor now only
guarantees to support 2 HDD. If you
require installing more than 2 HDD,
please contact your local vendor to
avoid unexpected damage of DVR
system.
6. Turn the plate and hard disk over carefully
and secure the hard disk on the plate. If
hard disk cannot be fit to the screw hole,
then, you may adjust the hard disk
position to fit the screw hole.

5
7. Screw tight the plate within hard disk
inside the DVR unit
8. Plug the power cable into hard disk
9. Plug the SATA cable into SATA connector
on the PC board
10. Plug another side of SATA cable into hard
disk
11. Screw the holder 12. Push the cover forward and secure the
cover
13. You may now connect all the cables and power on the DVR unit.

6
B. Device Connection
SEB5108 Lite
i
– All connected devices have their own power supply are necessary.
– Pen drive and external hard disk must be FAT32 format.

7
SEB5116 Lite
i
– All connected devices have their own power supply are necessary.
– Pen drive and external hard disk must be FAT32 format.

8
SEB5116+
i
– All connected devices have their own power supply are necessary.
– Pen drive and external hard disk must be FAT32 format.

9
Fist Time to Use DVR System
1. Connect the cameras
2. Connect the mouse to DVR unit(through USB port on front panel)
3. Power on the DVR unit.
4. The preset screen (color bar) will show up and wait for preview screen to display (about 60
seconds).
5. When preview screen show up, please wait for the authorization dialog pop-up. For security
purpose, enter the User ID (default is Admin) and Password (default is 111111) to login the
DVR system. Click or right-click on the column to call out virtual keyboard to enter the
ID and password.
Preview Mode (SEB5116 series)
6. The hard disk must be formatted before user can use it with DVR unit. Following the below
steps to format the hard disk.
a. Click to call out SETTING MENU.

10
b. Click
System →System and click Next.
c. Click
Refresh button to detect the installed hard disk.
d. Select the hard disk that user wants to format it.
e. And then, click Format to start formatting.
7. Setup the date and time in order to have correct system time and date. Following the below
steps to setup date and time:
a. Click and select
System →System tab and click Next.
b. In
Time section, click Setting button of System Time.
c. Select the date and adjust the time, and then, click OK.

11
8. Setup the
Schedule to record.
a. Click →Setting →Schedule →System
b. Select the date and type of record (Weekly, Month, or None).
c. And then, select the week day (Sun. ~ Sat.) and hours (00 ~ 23) by click the week day
and hours table.
d. Click
Save.
e. Click
Record tab.
f. Select the record mode (Always, Motion, Sensor, or Smart) and date.

12
g. And then, select the week day (Sun. ~ Sat.) and hours (00 ~ 23) by click the week day
and hours table.
a. Click
Save and OK to complete the record schedule setting.
9. To start recording, click (record) button.
Using the Virtual Keyboard
Use the Virtual Keyboard and mouse to configure the DVR system. Just click or select
the column and right-click to call out the virtual keyboard. For uppercase, click Caps button. To
exit, click left-click anywhere on screen.

13
Familiarizing the Buttons in Preview Mode
(SEB5116 series)
Name Function
(1) Login Click to select reboot the DVR system or re-login in different
account.
(2) Status Display recording date and time
(3) Hard disk capacity Display the hard disk usage of capacity
(4) Record Start/stop video recording.
i
To start recording, user need to setup record schedule. Click >
Schedule >
Record tab. And then, select the record mode (Always, Motion, Sensor, or Smart) and
date.
(5) Split screen mode Select from 6 different split screen types to view all the camera,
or one camera over the other or alongside on a single screen. It
also allows you to switch and view different camera number.
i
- Double click on channel can switch to full screen mode of the channel.
- When you are in single screen mode, Right click on the area you want to enlarge
view. Double right-click will back to normal screen view.
(6) Setup menu To call out system setup menu
(7) Playback Switch to Playback mode. This allows you to view the recorded
video file.
(8) Channel preview To display live video of all channels

14
To Playback the Recorded File
To switch in Playback mode, click (Playback) button at the bottom right corner of
Preview mode user interface. And then, select the date, hour, and minute that user wants to
playback from Calendar Search. Click OK to start playback.