Avidsen HomeCam360 User manual

EN Motorised IP WiFi camera
HomeCam360
ref. 127003
www.avidsen.com
V1 Google Play
Free available on
Available on the
Google Play
Free available on
Available on the
Free available on
2.4GHz
Av
Av
idsen
idsen
Home
V1

CONTENTS
A - SAFETY INSTRUCTIONS 05
1 - OPERATING PRECAUTIONS 05
2 - MAINTENANCE AND CLEANING 05
3 - RECYCLING 05
B - PRODUCT DESCRIPTION 06
1 - KIT CONTENTS 06
2 - HOMECAM 360 CAMERA 06
3 - MEANING OF THE WARNING LIGHT 06
C - INSTALLATION 07
1 - OPERATION 07
2 - INSTALLING THE CAMERA 07
3 - INSTALLING THE MICRO SD CARD 07
4 - INSTALLING THE MOBILE APPLICATION AND CREATING AN ACCOUNT 07
5 - CONNECTING THE CAMERA 09
5.1 - BY QR CODE 09
5.2 - OTHER METHOD 11
6 - RESETTING THE CAMERA 13
D - USING THE PRODUCT 14
1 - USING THE HOMECAM360 CAMERA 14
2 - BASIC SETTINGS 14
3 - USING THE ALARMS 15
3.1 - MOTION DETECTION ALERT 15
3.2 - SOUND DETECTION ALERT 15
4 - SETTINGS FOR RECORDINGS 16
4.1 - RECORDING WITHOUT A MICRO SD CARD 16
4.2 - RECORDING WITH A MICRO SD CARD 16

3ENEN
MOTORISED IP WIFI CAMERA
3EN
5 - BENEFIT AND USE OF PARTS IN THE AVIDSEN HOME APPLICATION 17
5.1 - CREATING A FAMILY 17
6 - USING THE PRODUCT WITH GOOGLE HOME 18
6.1 - IF YOU HAVE AN ANDROID SMARTPHONE WITH GOOGLE ASSISTANT 18
6.2 - IF YOU HAVE AN ANDROID SMARTPHONE WITHOUT GOOGLE ASSISTANT
OR AN IPHONE 19
7 - USING THE PRODUCT WITH AMAZON ALEXA 19
8 - SCENARIO AND AUTOMATION 20
8.1 - TRIGGERING A SET OF ACTIONS (SCENARIO) 20
8.1.1 - Programming the “I’m going” scenario 21
8.2 - CREATING AN AUTOMATION 22
8.2.1 - Programming the “Living room lighting” automation 24
E - FAQ 28
F - TECHNICAL AND LEGAL INFORMATION 30
1 - TECHNICAL CHARACTERISTICS 30
2 - RADIO CHARACTERISTICS 30
3 - WARRANTY 31
4 - HELP AND ADVICE 31
5 - PRODUCT RETURNS/AFTER SALES SERVICE 31
6 - EC DECLARATION OF CONFORMITY 31

5EN
MOTORISED IP WIFI CAMERA
A - SAFETY INSTRUCTIONS
1 - OPERATING PRECAUTIONS
• The cameras must not be installed where the
lens filter may be vulnerable to scratching and
dirt.
• Do not expose the lens to direct sunlight or any
reflected light source.
• Do not daisy-chain extension cords and/or
multi-socket adapters.
• Do not install near acidic chemicals, ammonia
or sources of toxic gases.
• The installation and use of the camera must
comply with local laws.
2 - MAINTENANCE AND CLEANING
• Always unplug the product from the mains
before carrying out any maintenance.
• Never use abrasive or corrosive substances to
clean the products.
• Use a soft, slightly damp cloth.
• Never use an aerosol to spray the product as
this may damage the internal workings.
3 - RECYCLING

This logo denotes that devices no longer
in use should not be disposed of as
household waste. They are likely to
contain hazardous substances that are
dangerous to both health and the
environment. Return the equipment to
your local distributor or use the recycling collection
service provided by your local council.
Pour en savoir plus :
www.quefairedemesdechets.fr

6
MOTORISED IP WIFI CAMERA
EN
B - PRODUCT DESCRIPTION
1 - CONTENTS OF THE KIT
2 - HOMECAM CAMERA 360
3 - MEANING OF THE WARNING LIGHT
The LED located on the camera gives the following indications:
- LED lights up blue:the camera is connected.
-LED lights up red:the camera is restarting.
- LED flashes red:the camera is awaiting connection.
1Camera
2USB/Micro USB cable
3230 VAC/5 VDC mains adaptor
4Adhesive mounting
5Wall mounting bracket
6Narrow tool for WiFi RESET
7Wall plugs for attaching the base
8Screws for attaching the base
9Quickstart
1x 1 2x 1 4x 1 3x 1
5x 1
6x 1 9x 1 7x 3 8x 3
1
3
2
5
6
7
1Microphone
2Warning light
3Camera lens
Front view Rear view
4Micro SD card slot
5Reset button
6Loudspeaker
7Micro USB port
RESET
SD
4

7EN
MOTORISED IP WIFI CAMERA
C - INSTALLATION
1 - OPERATION
This camera will allow you to monitor your indoor
environment and will alert you directly on your
smartphone if motion or sound is detected. You
can also make photo and video recordings with this
device using a micro SD card (not included).
2 - INSTALLING THE CAMERA
Plug the micro USB tip into the connector provided.
(Ensure the tip does not depress fully).
Clip the mounting bracket and then slightly rotate it
counterclockwise to lock it into place.
Plug the camera into the camera's mains adapter.
The camera will then play a melody and its
indicator light will flash red. The camera is awaiting
connection.
3 - INSTALLING THE MICRO SD CARD
Your camera has a micro SD card slot, which gives
it an internal storage memory. The maximum size
is 128 GB. This card is optional, but required if you
wish the camera to record independently.
4 - INSTALLING THE MOBILE APP AND
CREATING AN ACCOUNT
Once the camera is connected, follow the
instructions below to pair it.
Download the Avidsen Home app from the
Play Store or App store.
Launch the app and log in if you already have an
account. If not, press CREER UN NOUVEAU
COMPTE (CREATE A NEW ACCOUNT) and let
the application guide you.

8
MOTORISED IP WIFI CAMERA
EN
C - INSTALLATION
After accepting the privacy policy, you can create
an account with an email address or with a
phone number. Choose the method that suits
you; however, we recommend that you create your
account with an email address.
Procedure by email
Procedure by phone
In both cases, choose your country and then, after
entering your email address or phone number, select
Obtenir le code de vérification (Get verification
code).
In a few seconds, you will receive a validation code
in your email inbox or by SMS. Enter this code to
finalise registration.
Note that this email may go into your spam folder.
If you do not receive a code before the countdown
has ended, press renvoyer (return) and check the
email address or telephone number entered.

9EN
MOTORISED IP WIFI CAMERA
C - INSTALLATION
To complete your registration, set a password
between 6 and 20 characters long with letters and
numbers only, then press Terminé (Finished).
5 - CONNECTING THE CAMERA
If you have more than one item to pair (plugs,
cameras, other bulbs) switch on only one item at
a time.
The following information may vary depending on
the app updates.
IMPORTANT: This device is compatible with 2.4
GHz - WPA/WPA2 networks. Not compatible with 5
GHz WiFi or with WEP encryption. Please check the
WiFi settings of your router or contact your Internet
service provider if you experience connection
difficulties.
A message may also appear during installation
indicating that the WiFi password and SSID is too
long. Make sure that your box password and SSID
are less than 20 characters long. Otherwise, see
Chapter 5.2 Other Method.
5.1 By QR Code
To start the installation, press AJOUTER (ADD).
Make sure your phone is connected to your router’s
2.4 GHz WiFi network.
Select the product that you wish to pair and select
the HomeCam 360 camera.
Check that the camera indicator light is flashing red;
otherwise, see the chapter Resetting the camera.
Then press ETAPE SUIVANTE (NEXT STEP).

10
MOTORISED IP WIFI CAMERA
EN
C - INSTALLATION
Select your 2.4 GHz WiFi network (N.B. your
smartphone must be connected to the WiFi network
to which the camera will be connected), enter
your network password and press CONFIRMER
(CONFIRM)
.
After pressing continuer (continue), a QR code
will be displayed on your screen. Place your
smartphone screen 10-15 cm in front of the
camera lens. It will then start to beep. Then press
J’ai entendu le bip (I heard the beep).
If this fails, check that the lens is clean and clear
(protective film removed) and then repeat the step.
SD/RST
ST

11 EN
MOTORISED IP WIFI CAMERA
C - INSTALLATION
Please wait while the connection procedure takes
place. This step can take several minutes.
Your Avidsen HomeCam 360 has been successfully
paired. You can set a name by tapping the pencil and
pressing TERMINE (FINISHED).
Your camera is now operational and will appear in
your app. The camera indicator light will then be solid
blue.
5.2 Other method.
If you are unable to install your camera with the QR
code or the password and SSID of your box are
more than 20 characters long, follow the procedure
indicated below:
After you have passed the product selection step,
press Autre méthode (Other method) at the top
right of the screen.
Then select Configuration intelligente (Smart
configuration).

EN 12
MOTORISED IP WIFI CAMERA
Now press étape suivante (next step).
Select your 2.4 GHz WiFi network (N.B. your
smartphone must be connected to the WiFi network
to which the camera will be connected), enter
your network password and press CONFIRMER
(CONFIRM).
Wait for it to connect:
Your camera is now operational and will appear in
your app. The camera indicator light will then be solid
blue.
C - INSTALLATION

13 ENEN
MOTORISED IP WIFI CAMERA
6 - RESETTING THE CAMERA
The following instructions may help you if
you have any problems during the pairing
procedure:
To reset the camera, press the RESET button for
15 seconds. The camera will play a melody and
its indicator light will turn solid red and then start
flashing to confirm that the operation has been
successfully completed.
RESET
SD
The camera also needs to be deleted from the
mobile app. To do this, tap the pencil at the top right
of your screen. Once in the détails de l’appareil
(device details), scroll down to the bottom of the
interface and select enlevez l’appareil (remove
device).
To complete the deletion process, press confirmer
(confirm).
Your device has now been deleted from the app.
C - INSTALLATION

14
MOTORISED IP WIFI CAMERA
EN
D - USING THE PRODUCT
1 - USING THE HOMECAM360
With the Avidsen Home app, you can control
several functions on the HomeCam 360, such as
photo and video recording, or even motion and
sound detection alerts.
3
6
9
12
1
4
7
10
8
11
5
2
13
1Return icon
2Device name
3Device settings
4Activate/deactivate the sound
5Image quality adjustment
6Full Screen
7Take a photo
8Activate/deactivate oral communication
9Activate/deactivate video recording
10 Video recording playback interface
11 Rotation control
12 Motion detection alert settings
13 Access to the photo album (not available on
IOS)
2 - BASIC SETTINGS
This part covers the basic settings on your camera.
To access them, enter the paramètre (settings)
menu of your camera and then press the Réglages
de fonction de base (Basic function settings) tab
.
Once in the réglages de base (basic settings), you
will have access to several features.
2
4
1
3
1Activate/deactivate the power indicator
2Reverse the direction of the image
3Show/hide time and date on video
4Infrared activation/deactivation setting

15 ENEN
MOTORISED IP WIFI CAMERA
D - USING THE PRODUCT
3 - USING THE ALARMS
The Avidsen HomeCam360 camera alerts you in
real time if motion and/or noise is detected within
a set time range. This alert is provided by a push
notification on your smartphone screen.
3.1 - MOTION DETECTION ALERT
To activate motion detection, go to the Paramètres
(Settings) menu of your camera and then select
Réglages de la détection de mouvement
(Motion detection settings).
You can then activate detection and have access to
different settings:
You can activate motion detection permanently or set
an activation time range. You can also set detection
sensitivity to low, medium or high.
3.2 SOUND DETECTION ALERT
To activate sound detection, go to the Paramètres
(Settings) menu of your camera and then select
Réglages de la détection de son (Sound
detection settings).
You can then activate detection and have access to
different settings:
After activating sound detection, you can set the
detection sensitivity to low or high.

EN 16
MOTORISED IP WIFI CAMERA
D - USING THE PRODUCT
4 - SETTINGS FOR RECORDINGS
The Avidsen HomeCam 360 camera is designed
to make recordings that can be viewed from the
Avidsen Home app.
4.1 RECORDING WITHOUT MICRO SD CARD
You can take a screenshot or create a manual
recording without a micro SD card. These items can
then be viewed directly in the Photo Album tab
(below the Lecture (Playback) tab). When reviewing
the camera’s video, press the Enregistre (Record)
icon to take a video, or Copie d’écran (Screenshot)
icon to take a photo.
Important: it is not possible to create a continuous
recording or event recording without a micro SD
card.
4.2 RECORDING WITH MICRO SD CARD
A micro SD card is required if you wish to create a
continuous recording.
Once installed, the Réglages de carte SD (SD
card settings) tab appears in the camera settings.
You will then be able to select the recording mode:
- Event recording: triggers recording once motion
or sound is detected.
- Continuous recording: the camera records
continuously.
You can also fully format the micro SD card from
this menu by pressing formatage de la carte
SD (format SD card). However, the camera will
automatically delete the oldest recordings once the
micro SD card is full.

17 ENEN
MOTORISED IP WIFI CAMERA
D - USING THE PRODUCT
5 - BENEFIT AND USE OF PARTS IN THE
AVIDSEN HOME APPLICATION
With the Avidsen Home application, you can manage
different kinds of smart devices (bulb, smart plug,
camera) which can be linked to a specific room in
your home, for creating scenarios or organising your
devices in the application. To do this, it is necessary
to create a “family.”
5.1 CREATING A FAMILY
Tap the profile icon at the bottom right to access the
profile settings.
Then select GESTION DE LA FAMILLE (FAMILY
MANAGEMENT). You can then choose a house
name (required), its location (optional) and the rooms
in the home.
Once your family has been configured to your liking,
click on “Terminé (Finished)” at the top right.
The family name (“house” in this example) will then
appear on the home screen with your devices.
You can then set the location of a device by going to
its settings and choosing a room. The smart device
will now appear in the selected room.

EN 18
MOTORISED IP WIFI CAMERA
D - USING THE PRODUCT
6 - USING THE PRODUCT WITH GOOGLE
HOME
Note: the name you give your Avidsen Home
devices is the one that will be recognised by Google
Assistant. Example: if you have a bulb called “kitchen
light,” the command “OK Google, turn on kitchen
light” will work, but “OK Google, turn on the light in
the kitchen” may not trigger any action.
Google Assistant can help you control your
connected devices.
For example, you can use the following commands:
“OK Google” plays the living room camera video on
the Living Room TV
You must have a Chromecast (in this example, it
is called “Living Room TV”)
For more information on device names or creating/
linking a room, please consult Google support.
A word of advice, however. In order to avoid
unwanted commands if you connect several modules
in one area, we recommend that you avoid using a
group name suggested by Google Home (bedroom,
office, living room, etc.) when naming your command
module.
In the event of problems with the Google Home
application or configuration of the device in
Google Home, contact Google support.
The setting up procedure depends on your
smartphone and requires an Internet connection:
The following information may vary
depending on updates to the Google Home app or
your operating system.
6.1 IF YOU HAVE AN ANDROID SMARTPHONE
WITH GOOGLE ASSISTANT
Your devices need to be paired in the Avidsen Home
app to be controlled with Google Assistant. They
must be connected on the same WiFi network.
• Connect devices to Google Assistant
- On your Android phone or tablet, press and hold
the home button or say “OK Google”.
- In the lower right-hand corner, press .
- Press the logo on the upper right then
Paramètres (Settings) then Assistant and
finally Contrôle de la maison (Control from
home).
- In the “Appareils (Devices)” tab, press “Ajouter
des appareils (Add devices)” .
- Select the Avidsen Home app, then follow the
instructions.
- Then enter the username and password of the
Avidsen Home account to authorise Google
Assistant to add and interact with your Avidsen
Home accessories.
Your product is now connected in Google Assistant
and you can use voice control with it.

19 ENEN
MOTORISED IP WIFI CAMERA
D - USING THE PRODUCT
6.2 IF YOU HAVE AN ANDROID SMARTPHONE
WITHOUT GOOGLE ASSISTANT OR AN IPHONE
Your devices need to be paired in the Avidsen Home
app to be controlled with Google Assistant. They
must be connected on the same WiFi network.
• Connect devices to Google Assistant
- On your phone or tablet, install and launch the
Google Home app and log in to the account
corresponding to your Google Home speaker.
- In the lower right-hand corner, press Compte
(Account) .
- Next, press Configurer ou ajouter (Set up or
add) and then Configurer un appareil (Set up
device).
- Press Vous avez déjà configuré des
appareils? (Have something already set
up?)
- In the list that appears, press Avidsen Home
- Then enter the username and password of the
Avidsen Home account to authorise Google
Assistant to add and interact with your Avidsen
Home accessories.
7 - USING WITH AMAZON ALEXA
Note: the name you give to your Avidsen Home
devices is the one Alexa will recognize.
Example: if you have a bulb named
“Kitchen light,” the command “Alexa turn on kitchen
light”
will work, but “Alexa turn on the light in the kitchen”
may not trigger any action.
The following information may vary depending on
updates to the Google Home app or your operating
system.
The Amazon Alexa Assistant can help you control
your connected devices.
For example, you can use the following commands:
“Alexa” plays the living room camera video on the
Living Room Screen
You need an Echo Spot or Echo Show (in this
example, it is called “Living Room Screen”)
Download and install the Amazon Alexa app from the
Play Store or Apple store.
Your devices need to be paired in the Avidsen Home
app to be controlled with Amazon Assistant. They
must be connected on the same WiFi network.
• Installing the Avidsen Home Skill
- In the Amazon Alexa app, press the menu at the
top left and select Skills et Jeux (Skills and
Games)
- Search for Avidsen Home in the list of skills or
use Recherche (Search) at the top right
- Select the Avidsen Home Skill and activate
for use
- Fill in the username and password for the
Avidsen Home app
- Once the skill is correctly paired, press the cross
at the top left-hand side.
- The app will offer to search for devices. Press
Detect devices.
• Connect devices to Amazon Echo
- Using the guided Search to connect an
automated device
· In the Amazon Alexa app, press the menu
at the top left and select Ajouter un appareil
(Add a device).
· Select the type of device you want to
connect.
· Select the brand and follow the instructions
on the screen.

EN 20
MOTORISED IP WIFI CAMERA
D - USING THE PRODUCT
- Use voice command to connect an automated
device
· Once a skill is installed, say “Alexa, find new
devices.”
· After 45 seconds, Alexa will give you the
devices found.
For more information on Amazon Alexa, please
consult Amazon support.
A word of advice,however. In order to avoid
unwanted commands if you connect several
modules in one area, we recommend that you
avoid using a group name suggested by Alexa
(bedroom, office, living room, etc.) when naming
your command module.
In the event of a problem with the Amazon
Alexa app or with setting up the device in
Amazon Alexa, please contact Amazon
support.
8 - SCENARIO AND AUTOMATION
Each device in the Avidsen Home range can be
triggered and interact with other products. This way,
you can create life scenarios, grouping different
actions or sequences into one, or automatically
trigger a device according to the status of another.
8.1 TRIGGERING A SET OF ACTIONS
(SCENARIO)
The scenario system in the Avidsen Home app
allows you to group actions that will be triggered
on demand, by clicking on a single button on your
smartphone.
Example: creating an “I’m going” scenario to turn
off my smart plug and activate motion detection on
my camera:
Click on at the bottom of the screen, then on
Scénario (Scenario) at the top left and, finally, on
Ajouter un scénario (Add a scenario):
Name your scenario, then click on to set the
actions to be executed:
1
2
3
4
1Name your scenario here at your
convenience
2You can change the background image
here
3Set the actions to be performed by
clicking here
4If the box is checked, the scenario will be
displayed alongside your products linked
to the application