Avidsen 100872 User manual

Sirène intégrée
100m
2.4GHz
• To add detectors, tap the “+” icon at the top left and scan
the QR code on your detector. Repeat this operation for each
detector and remote control you own.
4 ACTIVATING THE DETECTORS
ON
OFF
DC-5V
5. INSTALLING THE DETECTORS
5mm
maxi
Repères
The opening detectors can be fixed to either a window or door
using the double-sided strip or screws and wall plugs suitable
for the type of surface. We recommend placing the magnet on
the mobile part (door or window) and the detector on the frame.
Ensure that you respect the mounting orientation: the markers
on the side of the magnet and those on the side of the detector
must line up when the door or window is closed.
1. KIT CONTENTS
QUICK INSTALLATION GUIDE
EN
2. CENTRAL UNIT CONNECTIONS
Caution: use only the mains adaptor supplied to power the
siren. No others may be used.
3. CONFIGURATION
Download the Avi-cam IP application from the appstore or
Google Play and then launch the application.
Important: first connect your smartphone or tablet to the WiFi
network that your siren should be using.
Network compatibility: 2.4GHz - 20/40 auto - WPA/WPA2
Not compatible with 5GHz WiFi, not compatible with WEP
encryption.
Special characters (#!»&@ etc.) in your security key or network
name as well as HT40 (forced 40MHz bandwidth) may lead to
connection difficulties.
Please check the WiFi settings of your gateway with your Internet
service provider if you experience connection difficulties.
• If you don’t already have an account, tap “s’enregistrer”
[register]. • Otherwise, tap “se connecter” [log in] and
enter your username and password. Finish by tapping “se
connecter” [log in].
ref. 100872
V1
Fill in the “E-mail” [Email] and “Mot de passe” [Password] fields
“E-mail” [Email]: enter a valid email address.
“Mot de passe” [password]: choose a personal password
containing letters and numbers between 6 and 30 characters
long.
Click on “Envoyez le code de vérification” [send the
confirmation code]
Check your inbox in order to obtain the code, which you will
then enter into the “entrer le code de vérification” [enter the
confirmation code] field.
Once you have entered the confirmation code, finish by clicking
on “Terminer” [Finish] or “s’enregistrer” [Register].
Note:if, after 5 minutes, you still have not received the email
with the code, please make sure the message was not sorted
into your “courrier indésirable” [junk mail] or “SPAM”
[Spam] folder.
The countdown that appears once you tap “envoyer code de
vérification” [Send confirmation code] is not the time remaining
to enter the code, but rather a protective measure. You can only
request one code per minute.
• Once you have logged into your account for the first time, tap
the shield icon at the bottom of the screen and then “Ajout
appareil” [Add device] in the centre of the screen
Make sure your alarm is plugged into power and that it
announces out loud that it is ready. Enter the password to the
WiFi network to which your smartphone or tablet is connected
and click next.
The app will return to the “Alarme” [Alarm] menu once WiFi
configuration is complete.
Note: if the alarm does not speak, press and hold the “RESET”
[RESET] button next to the power supply for 3 to 5 seconds.
• You can access settings by tapping the shield icon in the
frame:
5x 1
7x 2
2x 2 3x 2
ON
OFF
DC-5V
4x 2
Free available on
Google Play
Free available on
6x 1
1x 1
9x 4 10 x 4
13 x 2 14 x 6
8x 4
15 x 1 12 x 4 11 x 2
1Siren
2Opening sensor
3Movement detector
4Remote control
5230V A/C 50Hz mains adaptor / 5V D/C 1A USB
6USB cable
7Wall mount for movement detector
8Wall plugs for attaching the wall mount
9Screws for attaching the wall mount
10 Screws for attaching the opening detector
11 Self-adhesive strip for attaching the opening detector
12 Remote control batteries (CR2016)
13 Opening detector batteries (A23)
14 Movement detector batteries (LR03)
15 Narrow point for reset
The full instructions for your siren are
available on the www.avidsen.com website
or by scanning the below QR CODE using
your smartphone or tablet. Download these
instructions for more information on setting up
and using your Avidsen siren.

ON
OFF
DC-5V
floor
2.2m
The movement detectors must be
fixed at a recommended height of
2.2m.
6. USAGE
You can arm or disarm your alarm using your remote control:
button: arm your alarm
button: disarm your alarm
And using the app:
alarm: arm your alarm
alarm: disarm your alarm
If one of the detectors is triggered during the set time slot
(10:00pm to 7:00am by default), while protection is armed, an
alert is sent to your smartphone and the siren sounds for 30
seconds.
7. DECLARATION OF CONFORMITY
Declaration of conformity with the RED Directive
SmartHome France
hereby declares that the equipment designated below:
Wireless alarm kit 100872
Complies with the RED 2014/53/EU directive and that its
conformity has been assessed pursuant to the applicable
standards in force:
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
EN 62311:2008
EN 301 489-1 V2.1.1 (2017-02)
EN 301 489-17 V3.1.1 (2017-02)
EN 300 328 V2.1.1 (2016-11)
Tours, 14/01/2019
Alexandre Chaverot, CEO
Pour en savoir plus :
www.quefairedemesdechets.fr
SmartHome France
19 avenue Marcel Dassault
ZAC des Deux Lions - 37200 Tours - France