
128.836UK User Manual
* Insert the video capture card into an available USB port on your PC or laptop and
wait for the default device driver “USB Video” to be installed.
* Connect a good quality HDMI cable between your source device and the HDMI
video capture card, the max cable length is 15 meters.
* Open your chosen piece of acquisition software and select “add a new Source device”.
* From the list of available options select “Video Capture Device” or “USB Video”.
* You should now be able to review and record the video and audio signals entering
the capture card from your source device.
* Please refer to the user instructions for your chosen acquisition software if you
cannot carry out the above setup procedure correctly.
* NOTE: The minimum specification requirements for your PC or notebook are as follows:
CPU: PC - i5-3400 or above, Notebook - i7-3537U 2.0GHZ or above
Graphics card: PC - NVIDIA GT630 or above, Notebook - NVIDIA GT735M or above
System memory: 4GB RAM
Technical specifications:
* For reasons of electrical safety this device must never be immersed in water,
exposed to damp conditions or excessive force.
* Please do not use this device if you find that it is damaged in any way.
* Do not attempt to repair this device or take apart under any circumstances, as this
will invalidate your warranty.
This product is classed as Electrical or Electronic equipment and should not be
disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
AVSL (Europe) Ltd, Unit 3D North Point House,
North Point Bus. Park, New Mallow Road, Cork, Ireland.
Copyright© 2023 AVSL Group Ltd, Unit 2 Bridgewater Park,
Taylor Road, Trafford Park, Manchester. M41 7JQ.
Warning:
Errors and omissions excepted.