AVM FRITZ!Card DSL Owner's manual

High-Performance Communication by…
This manual is printed on chlorine-free paper. Please recycle!
S03/02-L03/02-20.050-R&P 03/02
FRITZ!Card DSL
Installation and
Operation
FRITZ!Card DSL
Installation and
Operation
English Edition

2FRITZ!Card DSL
FRITZ!Card DSL
This manual and the software it describes are protected by copyright. The manual and
software as presented are the object of a license agreement and may be used only in ac-
cordance with the license conditions. The licensee bears all risk in regard to hazards and
impairments of quality which may arise in connection with the use of this product.
This manual and the software it describes may not be transmitted, reproduced or altered
in whole or in part, in any form, by any means, nor may they be translated into any other
natural or computer language. The creation of a backup copy for personal use is excepted.
The information hereby made available to the licensee may be communicated to third par-
ties only with the written permission of AVM.
This software and documentation have been produced with all due care and checked for
correctness in accordance with the best available technology. AVM disclaims all liability
and warranties, whether express or implied, relating to this product’s quality, performance
or suitability for any given purpose which deviates from the performance specifications
contained in the product description.
AVM will not be liable for damages arising directly or indirectly from the use of the manual
or related software, nor for incidental or consequential damages, except in case of intent
or gross negligence. AVM expressly disclaims all liability for loss of or damage to hard-
ware, software or data as a result of direct or indirect errors or destruction and for any
costs, including ISDN, GSM and ADSL connection charges, related to the software and
manual supplied and due to incorrect installations not performed by AVM itself.
The information in this manual and the software it describes are subject to change without
notice for the purpose of technical improvement.
The product identification code is part of the license agreement.
© AVM GmbH 2002 All rights reserved.
Documentation release 05/2002
AVM in the Internet: www.avm.de/en/
Trademark notice: AVM and FRITZ! are registered trademarks of AVM GmbH. Windows is a
registered trademark of Microsoft Corporation. All other trademarks are trademarks or reg-
istered trademarks of the respective owners.
AVM Audiovisuelles Marketing
und Computersysteme GmbH
Alt-Moabit 95
AVM Computersysteme
Vertriebs GmbH
Alt-Moabit 95
10559 Berlin 10559 Berlin
FCdsl-e.book Seite 2 Freitag, 17. Mai 2002 11:55 11

FRITZ!Card DSL – Contents 3
Contents
1FRITZ!CardDSL 6
1.1 What Does FRITZ!Card DSL Include? . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.2 What Was Delivered? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.3 Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.4 Installing FRITZ!Card DSL Parallel to an ISDN-Controller . . . . . . . . . 8
2 Installing FRITZ!Card DSL 10
2.1 Installing FRITZ!Card DSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.2 Connecting FRITZ!Card DSL to the ADSL and the ISDN Access. . . . 11
2.3 What Is Installed? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.4 Installing the Driver Software in Windows Me . . . . . . . . . . . . . . . . 13
2.5 Installing the Driver Software in Windows 98. . . . . . . . . . . . . . . . . 14
2.6 Installing the Driver Software in Windows XP. . . . . . . . . . . . . . . . . 15
2.7 Installing the Driver Software in Windows 2000 . . . . . . . . . . . . . . 16
2.8 Installing the ADSL Software FRITZ!DSL . . . . . . . . . . . . . . . . . . . . . 17
2.9 Installing the ISDN Communications Software FRITZ! . . . . . . . . . . 18
2.10 Errors During Installation: What to Do. . . . . . . . . . . . . . . . . . . . . . . 19
2.11 Where to Find What After Installation . . . . . . . . . . . . . . . . . . . . . . . 19
2.12 Installing Individual Software Components . . . . . . . . . . . . . . . . . . 20
2.13 Removing Software Components in Windows Me and 98 . . . . . . . 21
2.14 Removing Software Components in Windows XP and 2000 . . . . . 21
3 Into the Internet with FRITZ!web DSL 24
3.1 Defining the Default Provider. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3.2 Dialing Up a Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3.3 Features of FRITZ!web DSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3.4 The FRITZ!web DSL Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3.5 FRITZ!web DSL Network Sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3.6 The Diagnostic Program ADSLWatch . . . . . . . . . . . . . . . . . . . . . . . . 30
3.7 The FRITZ!Card DSL Assistant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
4 FRITZ!: Software for Internet and ISDN 33
4.1 The Many Facets of FRITZ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
4.2 Using ISDN Services with FRITZ! . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
FCdsl-e.book Seite 3 Freitag, 17. Mai 2002 11:55 11

4FRITZ!Card DSL – Contents
5 Basic ADSL/ISDN Information 36
5.1 The ADSL Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
5.2 FRITZ!Card DSL at the ADSL/ISDN Connection . . . . . . . . . . . . . . . . 37
5.3 The ISDN Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
5.4 How Does the ADSL/ISDN-Controller FRITZ!Card DSL Work? . . . . . 39
6 Support 41
6.1 Information and Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
6.2 Assistance from FRITZ!Card DSL Support . . . . . . . . . . . . . . . . . . . . 43
Index 45
Declaration of CE Conformity 47
FCdsl-e.book Seite 4 Freitag, 17. Mai 2002 11:55 11

FRITZ!Card DSL – Typographical Conventions 5
Typographical Conventions
The following typographic conventions and symbols have
been used to make the contents of this guide clearer and to
emphasize important information.
Highlighting
You will find a quick overview of the highlightings used in
this guide below.
Symbols
The following graphic symbols are used in the guide. These
always appear in connection with text printed in gray italics.
This symbol indicates useful hints to assist you in working
with the product.
Indicates important instructions that must be observed to
avoid malfunctions.
Highlighting Command Example
Quotation
marks
Keys, buttons, icons,
tabs, menus, commands
“Start / Programs”;
“Enter”
Capitals Path and file names in
running text
SOFTWARE\
INFO.PDF
or README.DOC
Pointed brackets Variables <CD-ROM drive>
Typewriter font Information to be typed
in at the keyboard a:\setup
Gray italics Hints, instructions and
warnings, always accom-
panied by a symbol in
the margin
... For more infor-
mation, see ...
FCdsl-e.book Seite 5 Freitag, 17. Mai 2002 11:55 11

FRITZ!Card DSL
6FRITZ!Card DSL – 1 FRITZ!Card DSL
1 FRITZ!Card DSL
Welcome to the world of ADSL and ISDN! This manual is your
introduction to ADSL and ISDN communication with
FRITZ!Card DSL. It contains important information about the
scope of functions, operation and installation of your
FRITZ!Card DSL and the corresponding software.
ADSL (Asymmetric Digital Subscriber Line) is a data trans-
mission procedure for high-speed Internet access via stan-
dard telephone cable. FRITZ!Card DSL supports the ADSL ac-
cesses offered by various providers and makes available the
entire range of telematics services like telephone, fax, file
transfer and video communication via ISDN.
1.1 What Does FRITZ!Card DSL Include?
FRITZ!Card DSL by AVM presents a communications package
which provides the advantages of both ADSL and ISDN: high
transmission speed, fast connection, optimum line quality
and maximum operating reliability.
The communications package FRITZ!Card DSL consists of:
lthe FRITZ!Card DSL with the appropriate driver software
lFRITZ!DSL, the ADSL software with:
–FRITZ!web DSL, the software for Internet access
–FRITZ!web DSL Network Sharing
–the diagnostics software ADSLWatch, WebWatch
and the configuration tool “DSL Assistant”
lFRITZ!, the ISDN communications software
land the AVM system drivers
–for ADSL operation
AVM DSL NDIS WAN CAPI Driver
–for ISDN operation
AVM ISDN CAPI Port Driver, AVM NDIS WAN CAPI
Driver and AVM TAPI Services for CAPI.
FCdsl-e.book Seite 6 Freitag, 17. Mai 2002 11:55 11

What Was Delivered?
FRITZ!Card DSL – 1 FRITZ!Card DSL 7
1.2 What Was Delivered?
The box contains:
l1 FRITZ!Card DSL
The FRITZ!Card DSL connects your computer to ADSL
technology and to the ISDN network.
l1 ADSL cable
Use the cables delivered in the package to connect
FRITZ!Card DSL to the socket of the splitter labeled
“DSL”.
l1 ISDN cable
Use this cable to connect the FRITZ!Card DSL to the
ISDN jack of the network terminator (NT).
l1 FRITZ!Card DSL CD with
–driver software for FRITZ!Card DSL
–FRITZ!DSL ADSL software
–FRITZ! ISDN communications software
–AVM system driver for ADSL and ISDN operation
–documentation for all enclosed AVM products
lFRITZ!Card DSL manual (what you’re reading now)
Documentation for the FRITZ!Card DSL ADSL/ISDN-Con-
troller
l1 registration card
This card is used to register the customer in the AVM
customer database. AVM support is only available to
customers who have submitted their registration card.
The Product Identification Code is printed on the back of the
CD envelope. This number is part of your license agreement
with AVM. Be sure to keep it in a safe place!
FCdsl-e.book Seite 7 Freitag, 17. Mai 2002 11:55 11

Installation Requirements
8FRITZ!Card DSL – 1 FRITZ!Card DSL
1.3 Installation Requirements
Your computer must meet the following requirements to op-
erate FRITZ!Card DSL:
lYou must have an ADSL access.
FRITZ!Card DSL supports the ADSL accesses offered by
various providers.
lAn ISDN access with the DSS1 (Euro ISDN) D-channel
protocol must be installed.
lAn IBM or 100% compatible computer with Pentium II
processor or comparable processor, 300 MHz or higher,
and at least 32 MB RAM.
lYour computer must have a free PCI slot and a free inter-
rupt for this slot.
lThe operating system Microsoft Windows Me, Windows
98, Windows XP or Windows 2000 Professional must be
installed.
lTo operate FRITZ!fon, a module of the FRITZ! communi-
cations software, you must have a sound card and driv-
er with full-duplex capability, and suitable sound in-
put/output equipment (such as a headset).
You can install FRITZ!Card DSL if your computer meets all of
these requirements.
1.4 Installing FRITZ!Card DSL Parallel to
an ISDN-Controller
If you already have an ISDN-Controller installed, for instance
an AVM FRITZ!Card PCI, then please follow the instructions
below:
Operating FRITZ!Card DSL and an ISDN-Controller
The FRITZ!Card DSL is equipped with an integrated passive
ISDN-Controller, comparable to a FRITZ!Card PCI by AVM. Op-
erating both of these products in one system presents no
problems. However, the ISDN features of FRITZ!Card DSL can-
FCdsl-e.book Seite 8 Freitag, 17. Mai 2002 11:55 11

Installing FRITZ!Card DSL Parallel to an ISDN-Controller
FRITZ!Card DSL – 1 FRITZ!Card DSL 9
not be activated in addition to those of an ISDN-Controller al-
ready installed in the system! If you would like to continue
using an existing ISDN-Controller, it must be completely inte-
grated and operable in the system (CAPI 2.0 drivers in-
stalled) before FRITZ!Card DSL is installed.
Please note that multi-functional products with integrated
a/b interfaces like the AVM ISDN-Connector FRITZ!X USB are
also equipped with an integrated ISDN-Controller.
During installation of the FRITZ!Card DSL driver software, any
existing ISDN-Controllers are recognized automatically and
the driver software activates only the DSL features of
FRITZ!Card DSL.
Removing an Existing ISDN-Controller
To use both the ADSL and ISDN features of FRITZ!Card DSL,
any ISDN-Controllers already installed in your system must
be removed before installation of the new drivers. For details
about removing the ISDN-Controller, please see the docu-
mentation for that product.
FCdsl-e.book Seite 9 Freitag, 17. Mai 2002 11:55 11

Installing FRITZ!Card DSL
10 FRITZ!Card DSL – 2 Installing FRITZ!Card DSL
2 Installing FRITZ!Card DSL
FRITZ!Card DSL can be installed in the Windows Me, Win-
dows 98 and in Windows XP or Windows 2000 operating sys-
tems.
Follow the instructions in the sections below.
2.1 Installing FRITZ!Card DSL
1. Switch off your computer and any connected devices
and then pull the power plug.
2. Open the computer housing.
3. Select a free PCI slot and remove the blanking plate
from the top end of the slot.
4. Insert the FRITZ!Card DSL, connector strip first, into the
slot until the card is positioned firmly.
Inserting the FRITZ!Card DSL into the PCI slot
5. Screw FRITZ!Card DSL tightly to the top end of the slot.
6. Close the computer housing and plug the power cord
back into the socket.
This concludes the physical installation of FRITZ!Card DSL in
your PC.
FCdsl-e.book Seite 10 Freitag, 17. Mai 2002 11:55 11

Connecting FRITZ!Card DSL to the ADSL and the ISDN Access
FRITZ!Card DSL – 2 Installing FRITZ!Card DSL 11
2.2 Connecting FRITZ!Card DSL to the
ADSL and the ISDN Access
FRITZ!Card DSL is connected to ADSL and ISDN in just a few
steps. Please note the following diagram first:
Connecting FRITZ!Card DSL to ADSL and ISDN
Now carry out the following steps:
1. Remove the enclosed ADSL cable from the package. The
ADSL cable has identical plugs fitted to both ends.
2. Plug one of these into the FRITZ!Card DSL socket la-
beled “ADSL“.
Connecting the cable to the ADSL socket of FRITZ!Card DSL
3. Insert the other end of the ADSL cable into the socket of
the splitter labeled “DSL”.
FCdsl-e.book Seite 11 Freitag, 17. Mai 2002 11:55 11

What Is Installed?
12 FRITZ!Card DSL – 2 Installing FRITZ!Card DSL
4. Remove the enclosed ISDN cable from the package.
The ISDN cable has identical plugs fitted to both ends.
5. Plug one of these into the FRITZ!Card DSL socket la-
beled “ISDN“.
6. Insert the other end into the ISDN socket of your ISDN
access (ISDN network terminator ‘NT’).
Start your computer. As soon as the operating system is
ready, you will be prompted to install the software com-
ponents of FRITZ!Card DSL. Read the following sections.
For more information, see the sections “The ADSL Line” on
page 36 and “FRITZ!Card DSL at the ADSL/ISDN Connection”
on page 37.
2.3 What Is Installed?
The installation program sets up the following software com-
ponents in the initial installation:
ldriver software for FRITZ!Card DSL
lFRITZ!DSL ADSL software
lFRITZ!, the ISDN communications software
lAVM system drivers for ADSL and ISDN operation
If you already have individual software components such as
FRITZ! installed, read the instructions in section “Installing
Individual Software Components” on page 20.
The section “Where to Find What After Installation” on
page 19 explains where to find the individual software com-
ponents on your computer after installation.
FCdsl-e.book Seite 12 Freitag, 17. Mai 2002 11:55 11

Installing the Driver Software in Windows Me
FRITZ!Card DSL – 2 Installing FRITZ!Card DSL 13
2.4 Installing the Driver Software in
Windows Me
Once you have inserted the FRITZ!Card DSL in the computer,
the Plug and Play mechanism of Windows Me recognizes the
FRITZ!Card DSL as a “PCI Multimedia Device” automatically.
The “Add New Hardware Wizard” is started. Click “Next”.
Insert the FRITZ!Card DSL CD and follow the instructions on
the screen. Please note the following:
1. When asked: “What would you like to do?”, select the
option “Automatic search for a better driver (Recom-
mended)” and click “Next”.
2. Select the entry <CD-ROMDRIVE>:\FDSL98ME.INF in the list
of entries found and confirm with “OK”.
Drivers found
3. When the message “Windows has finished installing
the new hardware device” appears, click “Finish”.
4. When the Windows “ISDN Configuration” dialog for en-
tering the telephone number and SPID (Service Profile
IDentifier – telephone companies' identification code
for service indicators in the USA) appears, ignore it and
confirm by clicking “Next”. When the message “The
ISDN configuration is complete” appears, click “Finish”.
5. The DSL Assistant starts automatically.
When you confirm the welcome window and informa-
tion dialog with “OK”, the DSL Assistant will check that
the ADSL line is functioning properly and configure the
basic settings for ADSL connections.
Then the message that the AVM ADSL software can be in-
stalled appears. See the section “Installing the ADSL Soft-
ware FRITZ!DSL” on page 17 for more information.
FCdsl-e.book Seite 13 Freitag, 17. Mai 2002 11:55 11

Installing the Driver Software in Windows 98
14 FRITZ!Card DSL – 2 Installing FRITZ!Card DSL
2.5 Installing the Driver Software in
Windows 98
Once you have inserted the FRITZ!Card DSL in the computer,
the Plug and Play mechanism of Windows 98 recognizes the
FRITZ!Card DSL as a “PCI Multimedia Device” automatically.
The “Add New Hardware Wizard” is started.
Insert the FRITZ!Card DSL CD and follow the instructions on
the screen. Please note the following:
1. When asked: “What do you want Windows to do?”, se-
lect the option “Search for the best driver for your de-
vice (Recommended).”
2. When the program asks where the driver is located, ac-
tivate only the option “CD-ROM drive”.
Specifying the position of the driver in Windows 98
3. When the Windows “ISDN Configuration” dialog for en-
tering the telephone number and SPID (Service Profile
IDentifier – telephone companies' identification code
for service indicators in the USA) appears, ignore it and
confirm by clicking “Next”. When the message “The
ISDN configuration is complete” appears, click “Finish”.
4. When the message “Windows has finished installing
the software that your new hardware device requires.”
appears, click “Finish”.
5. The DSL Assistant starts automatically.
FCdsl-e.book Seite 14 Freitag, 17. Mai 2002 11:55 11

Installing the Driver Software in Windows XP
FRITZ!Card DSL – 2 Installing FRITZ!Card DSL 15
When you confirm the welcome window and
information dialog with “OK”, the DSL Assistant will
check that the ADSL line is functioning properly and
configure the basic settings for ADSL connections.
Then the message that the AVM ADSL software can be
installed appears. See the section “Installing the ADSL
Software FRITZ!DSL” on page 17 for more information.
2.6 Installing the Driver Software in
Windows XP
Administrator rights are required to install the driver soft-
ware in Windows XP Professional.
Once the FRITZ!Card DSL has been inserted in your computer,
the Plug and Play mechanism of Windows XP recognizes the
FRITZ!Card DSL as a “Multimedia Controller” automatically.
The “Found New Hardware Wizard” is started.
Insert the FRITZ!Card DSL CD and follow the instructions on
the screen. Please note the following:
1. When asked: “What do you want the wizard to do?”, se-
lect the option “Install the software automatically (Rec-
ommended)” and confirm with “Next”.
2. Select the entry <CD-ROM DRIVE>:\WINDOWS.XP\FDSL.INF
in the list of entries found and confirm with “OK”.
Drivers found
FCdsl-e.book Seite 15 Freitag, 17. Mai 2002 11:55 11

Installing the Driver Software in Windows 2000
16 FRITZ!Card DSL – 2 Installing FRITZ!Card DSL
3. If messages now appear for the Windows Logo Test, it is
safe to ignore them and to select the button “Continue
Anyway”.
4. When the message “The wizard has finished installing
the software for: AVM FRITZ!Card DSL” appears, click
“Finish”.
5. The DSL Assistant starts automatically.
When you confirm the welcome window and informa-
tion dialog with “OK”, the DSL Assistant will check that
the ADSL line is functioning properly and configure the
basic settings for ADSL connections.
Then the message that the AVM ADSL software can be in-
stalled appears. See the section “Installing the ADSL Soft-
ware FRITZ!DSL” on page 17 for more information.
2.7 Installing the Driver Software in
Windows 2000
Administrator rights are required to install the driver soft-
ware in Windows 2000.
In addition, the current Service Pack for Windows 2000 must
already be installed on your PC.
Once you have connected the FRITZ!Card DSL to the comput-
er, the Plug and Play mechanism of Windows 2000 recogniz-
es the FRITZ!Card DSL as a “Multimedia Controller” automati-
cally. The “Found New Hardware Wizard” starts automatical-
ly.
Follow the instructions on the screen and observe the follow-
ing:
1. When asked: “What do you want the wizard to do?”, se-
lect the option “Search for a suitable driver for my de-
vice (recommended)” and confirm with “Next”.
2. Insert the FRITZ!Card DSL CD, select the option “CD-
ROM drives” and confirm your entries with “Next”.
3. Then you are informed that a driver for a Multimedia De-
vice has been found.
FCdsl-e.book Seite 16 Freitag, 17. Mai 2002 11:55 11

Installing the ADSL Software FRITZ!DSL
FRITZ!Card DSL – 2 Installing FRITZ!Card DSL 17
4. In the next dialog Windows may prompt you to install
software not digitally signed by Microsoft. This request
depends on the driver signature options set on your
computer. Answer the question with “Yes”. Repeat this
procedure in the next two dialogs for the AVM NDIS
WAN CAPI Driver and the AVM DSL NDIS WAN CAPI Driv-
er.
5. Once the files have been copied onto your computer,
end this stage of installation with “Finish”.
6. The DSL Assistant starts automatically.
When you confirm the welcome window and informa-
tion dialog with “OK”, the DSL Assistant will check that
the ADSL line is functioning properly and configure the
basic settings for ADSL connections.
Then the message that the AVM ADSL software can be in-
stalled appears. See the section “Installing the ADSL Soft-
ware FRITZ!DSL” on page 17 for more information.
2.8 Installing the ADSL Software
FRITZ!DSL
For convenient use of the ADSL access, FRITZ!Card DSL pro-
vides the powerful FRITZ!DSL software.
The installation procedure for FRITZ!DSL is identical for all
operating systems. Follow the instructions on the screen and
observe the following:
1. The FRITZ!DSL welcome screen appears. Confirm with
“Next”.
2. Specify the folder in which you want to install FRITZ!DSL
on your computer.
3. Next, specify the program group for FRITZ!DSL in the
Start menu.
4. The system files are copied into the specified folder and
the ADSL software is installed on your computer. Finish
installation by clicking “Exit”.
This completes the software installation for FRITZ!Card DSL.
FCdsl-e.book Seite 17 Freitag, 17. Mai 2002 11:55 11

Installing the ISDN Communications Software FRITZ!
18 FRITZ!Card DSL – 2 Installing FRITZ!Card DSL
Continue with the next section.
2.9 Installing the ISDN Communications
Software FRITZ!
After the ADSL software has been installed, the setup pro-
gram reports that the FRITZ! ISDN communications software
can be installed.
1. Click “Install” or “Next” to proceed.
2. The welcome screen of the FRITZ! installation appears.
Click “Continue”.
3. First enter the folder in which the FRITZ! ISDN communi-
cations software is to be installed on your computer.
4. Next, specify the program group for FRITZ! in the Start
menu.
5. The next dialog asks you to choose whether you want
just to install the software, or to enter certain configura-
tion settings during the installation.
Installation: The FRITZ! modules are installed with de-
fault settings in the specified folder. All configuration
settings can be changed in the various FRITZ! modules
after installation. Please read the relevant sections in
the FRITZ! manual or see the Online Help for instruc-
tions.
Installation with Configuration: A number of basic set-
tings can be made during installation, for example, in-
formation for operation at a PBX.
This concludes the software installation for FRITZ!Card DSL.
Restart your computer.
FCdsl-e.book Seite 18 Freitag, 17. Mai 2002 11:55 11

Errors During Installation: What to Do
FRITZ!Card DSL – 2 Installing FRITZ!Card DSL 19
2.10 Errors During Installation: What to Do
If errors occurred during installation and the software com-
ponents of FRITZ!Card DSL were not installed correctly, pro-
ceed as follows:
1. Remove all components according to the instructions in
the sections “Removing Software Components in
Windows Me and 98” on page 21 and “Removing
Software Components in Windows XP and 2000” on
page 21.
2. Restart your computer.
3. Repeat the complete installation.
If you want to install individual components, read the in-
structions in the section “Installing Individual Software
Components” on page 20.
2.11 Where to Find What After Installation
After installation with default settings you will find the soft-
ware components of FRITZ!Card DSL at the following loca-
tions:
The program groups “FRITZ!DSL” and “FRITZ!” with the fol-
lowing entries are created in the Windows “Start” menu in
the “Programs” menu:
“FRITZ!DSL” Program Group
lADSLWatch: detailed ADSL diagnostic information for
experts
lWebWatch: tests the quality of your Internet connection
lDSL Assistant: for the initial configuration at an ADSL
access
lFRITZ!Card DSL Readme: important product information
lFRITZ!web DSL: for fast, secure access to the Internet
lFRITZ!web DSL Network Sharing: the software that en-
ables Internet connections in your network
FCdsl-e.book Seite 19 Freitag, 17. Mai 2002 11:55 11

Installing Individual Software Components
20 FRITZ!Card DSL – 2 Installing FRITZ!Card DSL
“FRITZ!” Program Group
The “FRITZ!” program group includes the “FRITZ!” ISDN com-
munications modules. The modules can also be opened by
means of the “FRITZ! ISDN and Internet” link on your desk-
top. For explanations of the modules, see “FRITZ!: Software
for Internet and ISDN” on page 33.
2.12 Installing Individual Software Compo-
nents
Certain software components may already be installed on
your computer, such as FRITZ!, for example. In this case you
may want to install only certain individual components from
the product CD. Please note the following:
lTo install the FRITZ!Card DSL driver software, open the
README.DOC file from the <OPERATING SYSTEM> folder
on the CD and follow the instructions given there.
lTo install the FRITZ!web DSL ADSL software, start the
SETUP.EXE program in the SOFTWARE\FRITZ!DSL direc-
tory on the installation CD.
lTo install the FRITZ! communications software, start the
SETUP.EXE program in the directory SOFTWARE\FRITZ!
directory on the installation CD.
lThe AVM ISDN CAPI Port Driver is installed using the
SETUP.EXE file located in the SOFTWARE\CAPIPORT\
CAPIPORT.<OPERATING SYSTEM> folder on the CD.
lTo use TAPI applications, install the AVM ISDN TAPI Ser-
vices for CAPI by starting the SETUP.EXE file located in
the SOFTWARE\TAPI folder on the CD.
FCdsl-e.book Seite 20 Freitag, 17. Mai 2002 11:55 11