ADTRAN AHT1U User manual

The ADTRAN Low Voltage Asynchronous Litespan HDSL Transceiver
Unit for the central office (HTU-C) is a DS1 interface unit that provides T1
service over four-wire interface facilities. The Low Voltage Litespan HTU-C
combine ADTRAN HDSL technology and DSC Litespan technology to provide
an HDSL interface to a Litespan system.
ADTRAN’s Low Voltage Litespan HTU-C is Licensed by DSC to safely
operate in Litespan 2000 and Starspan systems. The unit is licensed under
the Asynchronous High bit-rate Digital Subscriber Line T1 Interface Unit
(AHT1U) channel unit type.
The Low Voltage Litespan HTU-C can be used in Litespan 2000, Litespan
2012, and Litespan ONU channel bank assembly systems containing
Litespan system software versions of 7.1.3 or higher.
The ADTRAN provides the HTU-C products for narrowband and wideband
connections. The Litespan HTU-C is compatible with all ADTRAN HDSL
transceivers for remote sites (HTU-R) and the HDSL Range Extension
(HRE).
PRODUCT FEATURES
■RS-232 maintenance port
■784 kbps dual duplex 2B1Q
HDSL transmission over two
wire pairs
■Front panel status LEDs
conforming to the appearance
and function of typical Litespan
line cards
■Performance monitoring and
alarm reporting
■Low power consumption
■–135 volt span powering
capability of the Low Voltage
HDSL Range Extender (HRE)
and HDSL Transceiver Unit,
Remote (HTU-R)
■Troubleshooting functionality
■Licensed by the DSC Corporation
■Supports DSC Litespan software
release 7.1.3 or later
■Can be used in Litespan 2000,
Litespan 2012, and Litespan
ONU channel banks
AHT1U
LOW VOLTAGE ASYNCHRONOUS
HTU-C LINE CARD

Product Specifications
LOOP INTERFACE
■ Modulation Type: 2B1Q
■ Mode: Full duplex, echo cancelling
■ Number of pairs: Two
■ Bit Rate: 784 kbps per pair
■ Baud Rate: 392 kbps per pair
■ Service Range: Defined by CSA guidelines
■ Loop Loss: 36 dB maximum @ 200kHz
■ Bridged Taps: Single Taps <2 kft, total taps
≤2.5 kft
■ Performance: Compliant with Bellcore
TA-NWT-001210
■ HDSL Tx Signal Level: 13.5 dBm
■ Imput Impedance: 135Ω
■ Return Loss: 20 dB (40 kHz to 200 kHz)
DIAGNOSTICS
■Local loopback (HTU-C)
■Remote loopback (HTU-R)
■Troubleshooting screen
MOUNTING
■Litespan 2000 DBA, Litespan 2012 CBA, or
an ONU CBA
ENVIRONMENT
■ Operating (standard): –40° to 70°C
■ Storage Temperature: –40° to 85°C
PHYSICAL
■ Dimensions: 4.42" H, 0.84" W, 10.4" D
■ Weight: Less than one pound
■ Humidity: Up to 95% non-condensing
POWER
■ Max Power Dissipation HTU-C and
HTU-R: < 4 watts
■ Span Power: –135 VDC internally
generated from the –48 VDC
Ordering Information
EQUIPMENT PART #
AHT1U HTU-C for DSC Litespan
AHT1U Narrowband
Wideband Wiring................................1245002L6
Call for individual module information.
Specifications subject to change without notice.
CORPORATE OFFICE
901 Explorer Boulevard
Huntsville, AL 35806
800 9ADTRAN
Local: 256 963-8000
Fax: [phone]
Fax Back: 256 963-8200
http://www.adtran.com
email: [email protected]
TELCO TECHNICAL
SUPPORT
800 726-8663
REGIONAL OFFICES
Irvine, CA
800 788-5408
Denver, CO
800 471-8651
Atlanta, GA
800 332-6945
Kansas City, KS
800 471-8649
Philadelphia, PA
800 471-8656
Dallas, TX
800 471-8648
Canada
800 232-6811
ADTRAN is an ISO 9001
registered company.
Printed in U.S.A. on recycled paper
61245.002L6-8A May 1998
©ADTRAN, Inc. 1998