AVOCOR E-30 Series User manual

E-30 Series
AVE-5530 / AVE-6530-A / AVE-7530-A / AVE-8630-A
Quick Start Guide

Your Avocor E-30-A series 4K interactive touch display
supports 4K@60Hz resolution, up to 20 simultaneous
touch points, multiple source inputs for your computers
and peripheral devices, and the new intuitive Avocor
UiQ on-screen display (OSD) menu.
This Quick Start Guide will provide basic operating
instructions to help get you started.
Welcome to your new Avocor E-30-A Series display

Welcome to Avocor UiQ
Avocor’s UiQ is the new smart touch enabled dynamic user
interface, with source preview and menu settings, that allows
for remote control free usage.

Time, Date and Week
Temperature C / F
Room Name & Settings
Wi-Fi connection
Source Preview & Selection

Select the gear icon to access
the settings menu

There are seven categorical tiles to choose from
in the Settings menu: Display, Network,
Language, Location & Time, Input, Security, and
About.
Touch one of these tiles to open a subset of
configuration options for your chosen Settings
category."

•Name - Assign a name to the display.
•Wallpaper -Set a default or custom user
images for the Home Screen.
•Energy Saving -Set Auto Power On/Off,
Power On Time, Power Off Time, Eco Mode,
OPS Always On, Display Sleep.
•Picture - Set the Scheme, Backlight, and
Advanced Settings for the display's picture.
•Audio -Set Mute, Treble, and Bass.

•Status -Shows Network & LAN status.
•LAN -Set a Static IP or DHCP.
•Wi-Fi -Configure Wi-Fi settings.
•Wake On LAN -Toggle Wake On LAN.

Configure Wi-Fi settings
•When the optional USB dongle is connected
to the display you will see a list of available
networks to choose from.
•Now select your network and type in your
password.

•Timezone - Set Timezone based on your city
and region.
•Auto Date & Time -Toggle Auto Date &
Time on/off.
•Use 24 Hour Time -Toggle 24 Hour Time
on/off.
•Date Format -Set a date format for the
Home Screen.
•Location (Weather) -Set the region for
accurate weather information.
•Unit (Weather) -Set unit for measure of
temperature (°F, °C)

•Favorite Source -Set the favourite source
(Home Screen, OPS PC, HDMI Front, HDMI
1, HDMI 2, DisplayPort, Type C 55” Only).
•Starting Source -Set the default source the
display will show automatically upon
powering on the display (Home Screen, OPS
PC, HDMI Front, HDMI 1, HDMI 2,
DisplayPort, Type C 55” Only).
•Auto Detect New Input -Toggle Auto
Detect New Input; determines whether the
display will automatically switch to a new
connection.
•Rename Sources -Set custom names for the
display's input sources.

•Require Passkey -Toggle Require Passkey
on/off.
•Set Passkey -Set a custom Passkey to
access display settings.

1
The Display at a Glance 55”
23 2 4
Power Switch Power Socket OPS PC Slot
1Guest Inputs
5
2Speakers
6
3Front Buttons
7
4Pen Tray
8Rear Ports
7
8
6
5

1
The Display at a Glance 65”
232
Power Switch Power Socket OPS PC Slot
1Guest Inputs
5
2Speakers
6
3Front Buttons
7
4Pen Tray
8Rear Ports
4
7
8
6
5

1
The Display at a Glance 75”|86”
232
Power Switch Power Socket OPS PC Slot
1Guest Inputs
5
2Speakers
6
3Front Buttons
7
4Pen Tray
8Rear Ports
4
7
8
6
5

Front Control Buttons and their Functions
No. Control Buttons Description
1Power LED State
Red: Display is in stand-by mode (backlight is off)
Green: Display is on (backlight is on)
Red/Green alternating: When display is shutting down
Red/Green alternating: When Freeze or Blank is enabled
2Ambient Light Sensor Measures visible ambient light
3Power Press the button a notification will appear asking to turn off.
Press the button again to confirm turn off the display
4Source Source switching and preview.
5Menu Displays menu options.
6Home Access to the UiQ Home screen
7Volume -Short press to reduce one level of volume;
Long press, continue to reduce the volume
8Volume + Short press to increase one level of volume;
Long press, continue to increase the volume
9Freeze
Push "Freeze" once the infrared touch is closed and the screen is
frozen. There is a Freeze symbol on the upper right.
Release mode: press the front “Freeze“ button to release, or press the
“Freeze” on the remote control to release.
Note: only physical keys (front, remote control) can be activated and cancelled
10 Blank Turn off the backlight (listening only)
1 2 3 4 56 7 8 9 10

Display Input Sources 55”

Display Input Sources 65” / 75” / 86”

Remote Control & Functions
POWER Power on/off the display
OPS Navigate to the OPS input
BLANK Blanks the display. Press again
to restore.
FREEZE Freezes the display. Press again
to restore.
OK/Direction keys Menu navigation and selection
RETURN Go back to the previous menu
HOME Navigate to the UiQ
home screen
MENU Open the OSD menu
Brightness -Decreases the Brightness
Brightness + Increases the Brightness
MUTE Toggle Mute on/off
VOL. -Decreases the volume
VOL. + Increases the volume
SOURCE
Open the
Source selection menu
SETTING Open display Settings
FRONT Switch to the HDMI Front input
source
DP Switch to the DisplayPort input
source
HDMI 1 Switch to the HDMI 1 input
source
HDMI 2 Switch to the HDMI 2 input
source
Type-C Switch to the Type C Input
Source –55” Only

Switching on
1. Plug the end of the supplied power cord into side of the display
2. Connect the other end to the power source.
3. Turn on the main power switch at the side of the display. The power
LED indicator light up Red to indicate that the display is in “standby”
mode.
4. Press the Power button and the power LED indicator on the display
will then light up in green, which tells you that the screen is switched
on.
5. After a brief warm-up period, the Avocor UiQ interface will be
displayed
Switching off
1. Switch the display off by pressing the power button on the display.
2. By pressing the button a notification will appear
•Please turn off PC before shutting down.
•To shut down completely, press power again.
3. By pressing power again, the display will then cycle and shut down.
4. The LED indicator on the display will switch from Green to Red,
which tells you that the screen is in standby mode.
Switching the Avocor display on and off