AVS Uriel Systems SCOPE212WIR3 User manual
H.264 Mega-Pixel
NETWORK IR BULLET CAMERA
USER MANUAL
(Ver 1.7)
2
3
INDEX
Introduction ...................................................................................................................................................... 6
Safety Cautions................................................................................................................................................ 6
Chapter 1. Package ........................................................................................................................................... 7
1.1 Camera Features ................................................................................................................................ 7
1.2 Package ............................................................................................................................................... 7
1.3 HOW TO INSTALL............................................................................................................................... 8
1.3.1 Camera installation .................................................................................................................... 8
1.3.2 Lens adjustment......................................................................................................................... 9
1.3.3 Dimension .................................................................................................................................. 9
1.4 Specification ..................................................................................................................................... 10
1.4.1 Camera Specification ............................................................................................................... 10
1.4.2 Camera Function...................................................................................................................... 10
1.4.3 Network Specification................................................................................................................11
1.4.4 Electric Specification .................................................................................................................11
1.4.5 Alarm Input/Output ................................................................................................................... 12
1.4.6 Interface ................................................................................................................................... 12
Chapter 2. Installation and Video check .......................................................................................................... 13
2.1 Installation......................................................................................................................................... 13
2.2 Video check....................................................................................................................................... 14
2.2.1 Change the setting value of PC network environment............................................................. 14
2.2.2 Connect the camera with web browser.................................................................................... 15
2.2.3 See the video ........................................................................................................................... 16
2.2.4 Active-X auto installation .......................................................................................................... 16
2.2.5 Installation complete ................................................................................................................ 18
2.2.6 Net Viewer description ............................................................................................................. 19
Chapter 3. Network Setting ............................................................................................................................. 20
3.1 Check Network and Installation Type............................................................................................. 20
3.2 Installation without IP sharing device(router) ............................................................................... 20
3.2.1 Static IP Setup.......................................................................................................................... 20
3.2.2 Dynamic IP Setup..................................................................................................................... 24
3.3 Installation with IP sharing device(router)..................................................................................... 26
3.3.1 General Installation .................................................................................................................. 26
Chapter 4. General Information ....................................................................................................................... 28
Chapter 5.System Information......................................................................................................................... 29
5.1 Camera Name.................................................................................................................................... 29
5.2 Language........................................................................................................................................... 29
5.3 Administrator's ID and Password Change..................................................................................... 30
5.4 Network Setting ................................................................................................................................ 30
5.5 Web port ............................................................................................................................................ 30
4
5.6 DDNS ................................................................................................................................................. 31
5.7 Date & Time....................................................................................................................................... 31
5.8 User Registration ............................................................................................................................. 32
5.9 Firmware Upgrade ............................................................................................................................ 33
5.10 System Reset/Restart .................................................................................................................... 33
Chapter 6. Stream Information ........................................................................................................................ 34
6.1 Video .................................................................................................................................................. 34
6.2 Audio.................................................................................................................................................. 35
6.3 RTSP Setting..................................................................................................................................... 35
6.4 OSD.................................................................................................................................................... 36
6.5 Privacy Zone ..................................................................................................................................... 37
6.6 External Video................................................................................................................................... 37
6.7 HTTP/CGI........................................................................................................................................... 38
Chapter 7. Event Information........................................................................................................................... 39
7.1 Motion................................................................................................................................................ 39
7.2 Alarm Input........................................................................................................................................ 39
7.3 Alarm Output..................................................................................................................................... 40
7.4 E-Mail ................................................................................................................................................. 40
7.5 FTP..................................................................................................................................................... 41
Chapter 8. Camera Information ....................................................................................................................... 42
8.1 Day & Night ....................................................................................................................................... 42
8.2 Color .................................................................................................................................................. 42
8.3 White Balance ................................................................................................................................... 43
8.4 WDR ................................................................................................................................................... 43
8.5 Effect.................................................................................................................................................. 43
8.6 Sense Up ........................................................................................................................................... 44
8.7 Shutter Speed ................................................................................................................................... 44
Chapter 9. IP Manager .................................................................................................................................... 46
9.1 Use of IP Manager ............................................................................................................................ 46
9.1.1 Run IP Manager program......................................................................................................... 46
9.1.2 Find IP address ........................................................................................................................ 47
9.1.3 Change IP address................................................................................................................... 47
Chapter 10. Basic Network .............................................................................................................................. 51
10.1 Public IP .......................................................................................................................................... 51
10.2 Private IP ......................................................................................................................................... 52
10.3 Ping test .......................................................................................................................................... 53
Chapter 11. Appendix ...................................................................................................................................... 55
11.1 Basic setting table.......................................................................................................................... 55
11.2. Troubleshooting of cable connection ......................................................................................... 56
11.3 Troubleshooting of network connection...................................................................................... 57
5
Chapter 12. Troubleshooting ........................................................................................................................... 58
Chapter 13. Warranty Card.............................................................................................................................. 59
6
Introduction
This is a megapixel network camera which uses a 1/2.8-inch megapixel progressive scan SONY CMOS
sensor.
Built-in H.264, MPEG4, MPEG CODEC and streaming server, the advantage of this camera allow you to
monitor real time image from a remote location via internet. This camera supports both static IP and dynamic
IP, and can change communication port, resulting in one IP address supporting multiple servers. It also
supports CMS(Central Monitoring System), various services and features waterproof
for outdoor use without extra device.
<Caution>
Software, server and service may be charged according to change of policy or may be
stopped without prior notification. Appearance, function and specification may be changed
without prior notification. Our company assumes no responsibility for visible or invisible loss
resulted from changes in policy or products.
Safety Cautions
*This camera may be damaged by electrical and physical shock.
Use regulated 12V DC, 1A power supply. Do not throw or drop it onto floor.
*In case the unit fails, DO NOT try to disassemble the product.
Contact or consult the distributor or an authorized technician for after-sales service.
Warranty void for the product disassembled without an authorization from the distributor or
an authorized technician.
* All responsibility by using this unit is on the user.
*In case it is installed at high location, be sure to mount securely to prevent the unit from
falling below.
7
Chapter 1. Package
1.1 Camera Features
1) Firmware upgrading and function controlling are available by network.
2) Built-in 3 Mega pixel 1/2.8" progressive scan SONY CMOS sensor.
3) Triple codec(H.264, Mpeg4, MJPEG)
4) This camera has a mechanical exchange of two filters with Sense up function to
receive the maximum available light at night.
5) Equipped with a number of convenient new functions such as OSD, Motion detection, Privacy ZONE
and E-zoom.
6) Two-way audio support
7) This camera adopted PoE that supplies power in addition to data sending and receiving using LAN
cable without separate power connection and it provides convenience for users at installation. When
you connect the camera with PoE and DC adaptor, Only PoE is used.
1.2 Package
Package of products is composed of camera, screw, user manual, software CD(see below).
Please check before starting installation. If there are any missing, please contact the shop where you
purchased.
[Caution] Please see the package as follows. This manual is based on Microsoft Windows XP. So,
there would be the difference according to operating system
8
1.3 HOW TO INSTALL
1.3.1 Camera installation
Fix the camera set with the supplied screws on ceiling or wall mount. If you don't use supplied screws, the
camera may fall off.
Put a sticker on the ceiling and make holes according to the spots marked on a sticker.
9
1.3.2 Lens adjustment
1.3.3 Dimension
10
1.4 Specification
1.4.1 Camera Specification
Item Specification
Type Megapixel network IR Bullet camera
Image Sensor 3 Mega Pixel SONY CMOS Image Sensor
Total pixel 2144 (H) × 1588 (V) approx. 3.40M pixels
Effective pixel 2048 (H) × 1536 (V) approx. 3.14M pixels
Scanning System Progressive Scan
S/N ratio 50dB
Video output CVBS : 1.0Vp_p / 75Ωcomposite for installation
Resolution 2048 x 1536 / 1600 x 1200 / 1920 x 1080 /
1280 x 1024 / 1280 x 720 / 640 x 480
Min. illumination 0.01 Lux (Sense up Auto x 4):LED OFF
0 Lux(25 Range):LED ON
Alarm input/output Input:1,output:1
IR LED 40PCS
Lens 2.8~10mm Vari-focal auto iris megapixel lens
1.4.2 Camera Function
Item Configuration
DAY&NIGHT Auto, Color, B/W
WDR Step 1~ Step 5, Back light, Front light
DNR 1 ~ 63
Brightness Adjustable
Contrast Adjustable
Sharpness Adjustable
White Balance(AWB) Auto, Indoor, Outdoor, Fluorescent, Manual
Saturation Adjustable
Edge Enhancement Adjustable
Negative Off, On
Pattern Generator Off, On
Sens-up Level 1 ~6
EZOOM X1 ~ X12 Selectable(Available with CMS only)
11
1.4.3 Network Specification
Classification
Item Specification
Summary
OS Embedded Linux
Network Interface RJ45 10/100BaseT, Ethernet
Setting By web browser
Network support Leased Line, Cable Modem, Support Dynamic IP
and Static IP. ADSL usable under Router
Supported Protocol TCP/IP, UDP/IP, RTP, RTSP, RTCP, NTP, HTTP, DHCP,
FTP, SMTP, DNS, DDNS
Security USER AUTHENTICATION
PC OS(Viewer) WINDOWS XP, VISTA, WINDOWS 7
Web browser IE 7.0 or higher
Audio
Audio Input / Output Mic In, Line out
Audio compression G.711 µ-law
Audio communication Two-way
Image
Compression H.264, MPEG-4, MJPEG
Resolution 2048 x 1536 / 1600 x 1200 / 1920 x 1080 /
1280 x 1024 / 1280 x 720 / 640 x 480
Compression Rate 200:1(Typical)
Frame Rate Max.15fps (@2048 x 1536)
Bit Rate 64 ~ 12000Kbps
Function
Simultaneous Access Max. 10 users
Video Recording Recording in client PC with CMS or
FTP Server upon Alarm Event
Motion Detection Support
Privacy Zone Support
OSD Support
Alarm Input / Output Input 1, Output 1 – Digital output, Open collector
Dynamic IP Support
IP Router Support
DDNS Support
1.4.4 Electric Specification
Classification Specification
Power Supply Regulated 12V DC, PoE(Power over Ethernet)-IEEE802.3af Class 0
Current Consumption MAX. 1A(12V DC)IR LED ON
12
Operation Temp. -10
℃
~ 50
℃
Preservation Temp. -20
℃
~ 60
℃
Weight Approx.1100g
※
※※
※
The specification is subject to change without any prior notice to improve the quality.
1.4.5 Alarm Input/Output
1.4.6 Interface
13
Chapter 2. Installation and Video check
2.1 Installation
On the assumption that User PC and the camera are used under static IP,
and the camera is to be directly connected with User PC or Local Network,
The installation procedure is to be;
(1) Connect the camera and PC with LAN cable(Direct cable or cross cable).
(Please use the direct cable if you connect to local network)
(2) Power on camera.
* Using regulated 12V DC 500
㎃
(No IR LED model) or 1A (Built-in IR LED model)
* Using PoE(Power Over Ethernet) : This camera adopted PoE that supplies power in addition
to data sending and receiving using LAN cable without separate power connection and it
provides convenience for users at installation. When you connect the camera with PoE and DC
adaptor, only PoE is used.
(3) Wait about 2 minute after on camera, the system will be booted.
14
2.2 Video check
Basic network setting value of the unit is to be;
To connect the unit in user's PC, change the setting value of PC network environment.
Set IP Address, Subnet Mask and Gate-way of user's PC with 192.168.1.50 /
255.255.255.0 / 192.168.1.1 as shown on [Pic. 2-1].
[Caution] Before changing the setting value, please memorize the previous setting value
on your PC.
2.2.1 Change the setting value of PC network environment
[Pic. 2-1] Network Setting for User PC
15
2.2.2 Connect the camera with web browser
[Pic. 2-2] Web browser address Input
(1) Run web browser as shown [Pic. 2-2].
(2) Input 192.168.1.30 (default value) in URL and press "ENTER" button.
(3) And then, [Pic. 2-3] is to be shown.
[Pic. 2-3] Main Homepage
(4) In case [Pic. 2-3] does not appear, press "factory reset" button for 5sec to reset hardware.
(5) Shown [Pic. 2-3], installation is complete.
16
2.2.3 See the video
Shown as [Pic. 2-3], input ID and password and click on “Viewer” to see the video feed.
User’s authority to see the video feed is as follow
I D Password Authority Detail
admin admin All Stream,
Web management
root root All Stream
guest guest View only Stream
[Table] User ID, Password, Authority
[Caution] You must change default value of ID/Password into new ones after installation
2.2.4 Active-X auto installation
If connecting to a camera for the first time, you will see the installation message.
Click "install" on the security certificate to load the Active-X control. If you choose
"Don't install", the web viewer would not work.
17
[Pic. 2-5] ActiveX Download
18
2.2.5 Installation complete
Upon installation, Web Viewer [Pic. 2-6] appears and image of camera is to be seen.
[Pic. 2-6] Web Viewer
Installation and check video are completed successfully.
Must change ID/PASSWORD.
19
2.2.6 Net Viewer description
Item Description
①
①①
①
Stream
selection
Select stream codec and resolution menu related to live-view was
defined only by the admin.(H.264/MPEG/MJPEG)
②
②②
②
Window size Default size is 640X480. Adjust the screen to the optimal size
(Recommendation : Select the same size with stream resolution)
③
③③
③
Connection /
Disconnection Connect or disconnect to the stream
④
④④
④
Recording Saves the stream as a moving picture file in the .avi format
⑤
⑤⑤
⑤
Capture Saves the snapshot as an image file in the .bmp format
⑥
⑥⑥
⑥
Saving path Specify the file saving path
⑦
⑦⑦
⑦
Camera name Display camera title
⑧
⑧⑧
⑧
Date Display the date
⑨
⑨⑨
⑨
Time Display current time
⑩
⑩⑩
⑩
Status Icon Display the site information such as Day/Night, Motion, Alarm
input/output
⑪
⑪⑪
⑪
Stream Info. Display the stream information such as Audio and recording
condition
20
Chapter 3. Network Setting
3.1 Check Network and Installation Type
This Chapter is for basic setting regarding Network. To install hardware,
basic understanding of network is required.
[Warning] The setting value might be different in accordance with network environment of user's PC.
[Reference] Please refer to Appendix for better understanding.
There are two ways to install hardware.
1. Install the camera without IP sharing device.
2. Install the camera under IP sharing device which is required PPPoE environment.
This explanation is based on upon default value of ex-factory.
[Caution 1] Check video before installation, on 'Chapter 2.Installation and video check'.
[Caution 2] In case using IP sharing device, only global IP is available.
[Caution 3] This unit doesn't support PPPoE directly. So, IP sharing Device is required to
connect to the camera.
<Installation without IP sharing device>
ㆍ
For static IP, refer to '3.2.1 Static IP Setup'.
ㆍ
For dynamic IP, refer to '3.2.2 Dynamic IP Setup'.
<Installation with IP sharing device>
ㆍ
Should set up with Static IP, refer to '3.3 Installation with IP sharing device' .
3.2 Installation without IP sharing device(router)
3.2.1 Static IP Setup
(1) Connect the camera to PC with LAN cable(direct cable or cross cable).
(2) Cable connection and network setup should be same as in 'Chapter 2. Installation and video check'’
(3) Connect the camera to Web.
Run web browser and input http://192.168.1.30(default value) in URL and
press "ENTER" button then [Pic. 3-1] will be shown.
Table of contents
