urmet domus 1099 User manual

DS1099-024B
Mod.
1099
fi
4K H.265 IP Camera Series
IP Bullet Camera Ref. 1099/600 IP Bullet Camera Ref. 1099/601
IP Dome Camera Ref. 1099/700 Vandal IP Dome Ref. 1099/701
USER MANUAL

DS1099-024B 2
TABLE OF CONTENTS
1Introduction................................................................................................................................................4
2Product Description ..................................................................................................................................5
2.1 Technical Features....................................................................................................................5
2.2 Opening the Box........................................................................................................................5
2.3 Warnings ...................................................................................................................................6
3Overview.....................................................................................................................................................8
3.1 Range of Application .................................................................................................................8
3.2 Product Description...................................................................................................................8
3.3 Operation Environment..............................................................................................................9
4Device Connection ................................................................................................................................. 10
4.1 Connectors Layout For IP Camera (Where Provided) ........................................................... 10
5Device Operation Instructions .............................................................................................................. 11
5.1 Check Connection .................................................................................................................. 11
5.2 Searching for the Device........................................................................................................ 11
5.3 Installation of Controls and Login to the System.................................................................... 12
6Login........................................................................................................................................................ 13
6.1 Preview................................................................................................................................... 13
7Live .......................................................................................................................................................... 13
7.1 PTZ Control ............................................................................................................................ 14
8Local settings ......................................................................................................................................... 16
9Playback.................................................................................................................................................. 17
10 Remote Setting ....................................................................................................................................... 18
10.1 Display Configuration ............................................................................................................. 18
10.1.1 Live.............................................................................................................................................................18
10.1.2 Image Control .............................................................................................................................................19
10.1.1 Privacy Zone...............................................................................................................................................20
10.1.2 ROI .............................................................................................................................................................20
10.2 Record Parameters ................................................................................................................ 21
10.2.1 Rec Parameters..........................................................................................................................................21
10.2.2 Schedule.....................................................................................................................................................21
10.3 Network .................................................................................................................................. 22
10.3.1 Network.......................................................................................................................................................22
10.3.2 Video Streaming .........................................................................................................................................23
10.3.3 E-Mail Configuration ...................................................................................................................................24
10.3.4 DDNS Configuration ...................................................................................................................................25
10.3.5 IP Filter .......................................................................................................................................................26
10.3.6 RTSP..........................................................................................................................................................26
10.3.7 FTP.............................................................................................................................................................27
10.4 Alarm ...................................................................................................................................... 28
10.4.1 Motion.........................................................................................................................................................28
10.4.2 I/O Alarm:....................................................................................................................................................28
10.4.3 Lens Blocking..............................................................................................................................................29
10.5 Device..................................................................................................................................... 29
10.5.1 HDD (Where included)................................................................................................................................29
10.5.2 Audio...........................................................................................................................................................30
10.5.3 Logs............................................................................................................................................................30
10.6 System.................................................................................................................................... 31
10.6.1 General.......................................................................................................................................................31
10.6.2 User Configuration......................................................................................................................................32
10.6.3 Info..............................................................................................................................................................32
10.7 Advanced................................................................................................................................ 33
10.7.1 System Update ...........................................................................................................................................33
10.7.1 Load Default ...............................................................................................................................................33
10.7.2 System Maintenance...................................................................................................................................33
10.8 Intelligent ................................................................................................................................ 34
10.8.1 Schedule.....................................................................................................................................................34
ENGLISH

DS1099-024B 3
10.8.2 Detection.....................................................................................................................................................34
10.8.2.1 Perimeter Intrusion Detection (PID)..........................................................................................................35
10.8.2.2 Line Crossing Detection (LCD).................................................................................................................35
10.8.2.3 Stationary Object Detection (SOD)...........................................................................................................35
10.8.2.4 Pedestrian Detection （PD）...................................................................................................................35
10.8.2.5 Face Detection （FD）............................................................................................................................35
10.8.2.6 Cross Counting （CC）...........................................................................................................................35
11 Mobile Software...................................................................................................................................... 36
11.1 Smartphone Device................................................................................................................ 36
11.1.1 Urmet IUVS plus Mobile Software...............................................................................................................36
11.1.1.1 Live..........................................................................................................................................................37
11.1.1.2 Playback..................................................................................................................................................40
11.1.1.3 Record.....................................................................................................................................................41
11.1.1.4 Images.....................................................................................................................................................41
11.1.1.5 Remote Settings ......................................................................................................................................42
11.1.1.6 Alarm.......................................................................................................................................................42
11.1.1.7 Device......................................................................................................................................................43
11.1.1.8 Help.........................................................................................................................................................45
11.2 P2P function ........................................................................................................................... 46
12 Technical specifications 4K IP Cameras ............................................................................................. 48
13 Maximum recording time with SD Card ............................................................................................... 50
13.1 Ref. 1099/601 –1099/701...................................................................................................... 50
14 Appendix ................................................................................................................................................. 54
14.1 Router Port Forwarding.......................................................................................................... 54
14.2 FAQ ........................................................................................................................................ 55

DS1099-024B 4
1 INTRODUCTION
Thank you for using our network camera products.Our network camera productsare integrated and developed for network
video monitoring, including Storage Network Bullet, Wireless Storage Network Bullet, IR Network Dome, IR Network
Weather-Proof Cameras and High-Speed Network Ball. High-performance single SOC chips are used in media processor
for audio/video acquisition, compression and transmission/transfer. Standard H.264 encoding algorithm is applied to
ensure clear and smooth video representation and transfer performance. Embedded Web Server offers users access to
real-time surveillance and remote control of front-end camera through IE browser.
Thenetwork cameras are easy to install and operate.The network cameras areapplicable to large and medium-size
enterprises, governmental projects, large mall, chain supermarkets, intelligent buildings, hotels, Hospitals and schools and
other group customers, as well as to applications requiring remote network video transmission and monitoring.
Instructions:
➢For purpose of this manual, IP camera means network camera.
➢Single click means a single click on the left mouse button.
➢Double click means a double-click on the left mouse button.
➢The default factory IP address for IP camera is 192.168.1.168.
➢The default factory administrator user name for IP camera is admin (in lowercase), and the password is admin (in
lowercase).
➢The default Web port number is 80 and the default media port number is 9988.
Statement:
Some information contained in this manual may differ from the actual product. For any problems you cannot solve with the
use of this manual, please contact our technical support or the authorized dealers. This manual may be subject change
without prior notice.

DS1099-024B 5
2 PRODUCT DESCRIPTION
URMET S.p.A. Ref. 1099/600, Ref. 1099/601, Ref. 1099/700 and Ref. 1099/701 are IP 4K Camera which can be fully
controlled via TCP/IP network connection.
2.1 TECHNICAL FEATURES
➢Hisilicon media processor with high performance and strong functions.
➢Non-interlaced CMOS sensor
➢Optimized H.265 video compression algorithms; Multi-stream transmission ensures high definition image
transmission on both narrowband and wideband.
➢Support simultaneous connection of up to 10 video streaming (i.e. if IP camera is connected to the NVR, NVR will
take 3 streams, so only leave 7 streams. If IP Camera is only connected to Browser, you will have 10 streams.
➢Support SD Card up to 128GB.
➢With Build-in Web Server, user may use Multi-Browser (i.e. Internet Explorer, Firefox Mozilla, Safari 6.0 for MAC
O.S.) to conduct real-time monitoring, setting and management on the site.
➢Managed from Urmet UVS Client Software
➢Software Mobile for the following Platforms: iOS (Iphone and iPad), Android (Smartphone and Tablet)
➢Support remote system upgrade.
➢Support LAN and Internet.
➢Support ONVIF protocol and RSSP protocol.
➢Support multiple network protocols, such as TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS,
RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
➢Support motion detection alarming function (user may set area and sensitivity) and sensor/alarm out function.
➢Support privacy zone function.
➢POE power supply function.
➢Support snapshot: Upload images by FTP or E-mail.
➢Log Supported: System logs, network logs, parameter logs, alarm logs, user logs, recording logs, storage logs
and all logs
➢Intelligent function (Perimeter Intrusion detection, Line crossing detection, Stationary Object Detection).
➢Reset Button supported.
➢Support automatic recovery function. It can be automatically connected in case of network interruption.
Note：The specifications of different products may be slightly varied.
2.2 OPENING THE BOX
Check that the packing and the contents are not visibly damaged. Contact the retailer immediately if parts are either
missing or damaged. Do not attempt to use the device in this case. Send the product back in its original packing if it
is damaged.
ACCESSORIES PROVIDED
➢Megapixel Camera
➢1 Install Bag
➢Quick manual
➢Mini CD containing Urmet software
Important note:
Accessories may be changed without prior notice.

DS1099-024B 6
2.3 WARNINGS
Electricity
➢Before connecting to electrical outlet, verify the electrical specifications of the device are suitable for the
available power source.
➢We suggest to connect the device to electrical outlet via a switch disconnector.
➢In case of misfunctioning, disconnect electrical power from the general switch.
➢Use only the provided power supply.
Safety precautions
➢Do not expose the device to rain or humidity and do not insert any solid or liquid object in it to prevent the
risk of fire or electrocution. In these events disconnect the device from the electrical outlet and call technical
assistance to check it.
➢Do not open the device. Any repair must be made by qualified personnel or by calling the nearest
authorized technical assistance center.
➢Keep the device away from children to prevent any, even involuntary, damaging.
➢Do not touch the device with wet hands as it might cause electrical shock or mechanical damages.
➢If the device falls down while working or if the salesbox is damaged, do not continue using it. If usage is
continued under such circumstances electrical shocks might take place. Contact the authorized retailer or
installer.
Installation precautions
➢Do not install the camera in places with possible exposure to rain or humidity without the proper protective
case.
➢Do not point the camera directly to sunlight or other intense sources of light, even when turned off. The
subject of recording must not be against the light.
➢Do not point the camera against reflective objects.
➢Some light conditions (such as fluorescent color) can affect the recorded colors.
➢Use AUTO-IRIS lens when operating the camera in changing light environments.
➢Do not use this device on any unstable support such as lurching or sloping table to prevent the device from
falling and be damaged.
➢If water or any other material should penetrate the camera, stop using it as it might cause fire or electrical
shock and contact the authorized retailer or installer.
➢Do not cover the device with any cloth while using to prevent deformation of the external part and inner
components heating which might provoke fire, electrical shock or mechanical damages.
➢Do not put magnets or magnetized objects close to the device to prevent functional anomalies.
➢Do not use this device in presence of smoke, steam, humidity, dust or intense vibrations.
➢Do not use the device shortly after moving it from warm to cold environment and vice versa. After moving
the device wait three hours before using it: this time is necessary for the device to adapt to the new
environment (temperature, humidity, etc.).
Usage precautions
➢Check the device is not damaged after removing the packaging.
➢Check the working environment is not too humid and the temperature is within the indicated range.
➢Do not point the camera against sunlight to prevent sensor damages.
Device cleaning
➢Use a dry cloth to remove dust and dirt from the device.
➢If dirt cannot be removed with a dry cloth, use a humid cloth and a neutral cleanser.
➢Do not use spray cleanser for device cleaning. Do not use volatile liquids such as gasoline, alcohol,
solvents etc. or chemical treated cloth to clean the device to prevent deformations, damages or scars on the
finishing paint.
➢Disconnect the device from the electrical outlet before cleaning.
Video recording
➢This device is not designed as a burglar system but mainly to transmit and record video images. URMET
S.p.A. is not in any way responsible for loss or damages of the user consequent to theft.
➢Before using the device, record a demo video to verify the correct functionality of this feature. URMET
S.p.A. is not in any way responsible for loss of recorded data consequent to wrong setting or usage, device
misfunctioning or failure.
➢This device is composed by electronic precision components. Do not hit the device while recording as it
might affect the video.
Privacy and Copyright
➢The IP camera is designed for surveillance systems. Video recording is subject to the laws applicable to
the Country where used.It is forbidden to record images with Copyright.
➢The User is responsible to check and respect all local laws and norms for video signal recording. The
manufacturer is NOT in any way liable for any usage of the product which might result not compliant to
the relevant norms. For further information please visit http://www.garanteprivacy.it/web/guest/home_en

DS1099-024B 7
Firmware upgrade
➢Refer to URMET S.p.A. Customer Service Technical Assistance periodically to check availability of
firmware upgrades.
Network configuration
➢Camera default setting is DHCP mode. If the network does not support dynamic addressing (DHCP), the
device will automatically switch to factory IP 192.168.1.168. Use Urmet “Device Config Tool” software to
modify the IP address and other network settings to prevent any conflict with other devices on the
network.
➢Once the camera is correctly connected and configured on the IP network it will be possible to show video
and settings on any PC or smartphone.
Network connections
➢When connecting a PC (using Software Client or Browser), any video channel on the PC will be using
“unicast” connection (TCP, RTP, UDP).
➢The device can support up to 10 “unicast” connections so it is possible to show the video on maximum 10
remote devices (PC or smartphone) at the same time depending on the available network band.

DS1099-024B 8
3 OVERVIEW
3.1 RANGE OF APPLICATION
The network cameras with powerful image processing capacity may be applied at various public places such as mall,
supermarket, school, factory and workshop, as well as in environments requiring HD video image such as bank and traffic
control system, as shown below:
3.2 PRODUCT DESCRIPTION
An IP camera is a digital online surveillance camera embedded with Web server and capable of independent operation,
giving user access to real-time monitoring through web browser or client software from any place across the world.
IP camera is based on the latest Hisilicon solution, an integrated media processing platform for audio/video acquisition,
compression and network transmission on a single board. It is in compliance with H.264/ H265 High Profile encoding
standards. Any remote user can have access to real-time monitoring by entering the IP address or domain name of the IP
camera in web browser. This network camera solution is applicable to residential or business environmentas well as a
wide range of situations requiring remote network video monitoring and transmission. The IP camera products are easy to
install and operate.
The IP cameras can be managed by several users with different authorization levels.
IP cameras allows mobile detection, and sends e-mail and snapshot taken in case of emergency and store the image or
video snapshot in SD card for retrieval.
Monitoring Center

DS1099-024B 9
3.3 OPERATION ENVIRONMENT
•Operating system: Windows 7/Windows 8/Windows 10 (32/64-bit),
Windows 2003/Windows XP/Windows 2000 (32-bit)
•CPU: Intel Core Duo II dual-core processor or higher
•Memory: 1G or more Video memory: 256M or more
•Display: 1024 × 768 or higher resolution
•IE: IE 6.0 or higher version

DS1099-024B 10
4 DEVICE CONNECTION
IP camera can be connected in two ways:
Connection to PC
Connect IP camera to PC via straight-through network cable, with power input connected to a DC 12V adaptor, and set
the IP addresses of the PC and IP camera in one network segment. The IP camera will communicate with PC within one
minute after being powered on if the network operates normally.
1. Connection to router/switch
This is more commonly used in connecting the IP camera to Internet, where the camera and PC are connected to
LAN ports of a router/switch, with gateway of the camera set to the IP address of the router.
4.1 CONNECTORS LAYOUT FOR IP CAMERA (WHERE PROVIDED)
1. BNC Interface: Local video signal output.
2. Audio Output Interface: RCA female head (white), can connect with external devices, such as speaker.
3. Audio Input Interface: RCA female head (red), can connect with input devices, such as microphone.
4. RJ45 Interface (Network Interface): Network signal output.
5. Power Interface: DC 12V.
6. Reset Button: Device will reset to defaults after pushing the button 3 seconds.
7. Alarm Interface: Including alarm input and output interface. ①,②as a set of alarm input interface, ③,④are the set
of alarm output.

DS1099-024B 11
5 DEVICE OPERATION INSTRUCTIONS
5.1 CHECK CONNECTION
2. The default factory IP address for IP camera is 192.168.1.168 and the subnet mask is 255.255.255.0. Allocate to
your computer an IP address in the same network segment as the IP camera, for example, 192.168.1.69, and a
same subnet mask as that of the IP camera.
3. Test whether the IP camera is connected properly and started normally by clicking on Start > Run and entering
"cmd" and pressing ENTER, and entering "ping 192.168.1.168" in the command line window to
4. Check whether the IP camera is accessible. If the PING command is executed successfully, it indicates that the IP
camera operates normally and the network is connected properly. If the PING command fails, check IP address and
gateway setting of the PC and connectivity of the network.
5.2 SEARCHING FOR THE DEVICE
5. Feedback: The Device Config Tool function may be used to search for the device across network segments. Before
running the Device Config Tool, select the local connection icon at the bottom right corner of the desktop;
6. Add the IP addresses of several network segments in the TCP/IP local area connection settings (as shown below).
You can run this tool to search for any device with an IP address in the same network segment.

DS1099-024B 12
Note:
Device Config Tool uses the Multicast protocol to search for the device across the segments; however, since firewalls
prevent multicast data packet traffic, they must be disabled so that the information on the device can be acquired.
Online device Config procedure
1. Run Device Config Tool by double-clicking on the icon.
It will search for and display any online device and its IP address, port number, web port number, number of
channels, configured name, device type and version, subnet mask, gateway, MAC address, connection pattern and
status.
5.3 INSTALLATION OF CONTROLS AND LOGIN TO THE SYSTEM
Before using the IE (Internet Explorer) browser to access the IP camera for the first time, the plug-in components must first
be installed, as follows:
Access the IP address of the IP camera to automatically download the controls from it.
Select an option in the plug-in installation pop-up dialogue box to run the installation process.
IPC Plug-In for the 2MP Series

DS1099-024B 13
6 LOGIN
6.1 PREVIEW
Open IE and enter the IP address of the camera (http://192.168.1.168) to bring up the login window shown below:
Login Interface for H.265 IP Cameras
In the login window you can choose a language for the IE client. Enter your username (admin by default) and password
(admin by default) and then press OK.
7 LIVE
Some of the buttons in the preview frame are described below.
: Button for setting the colour, brightness, contrast, saturation and sharpness of the frame.
: (PTZ control)
: This reads the recording file from the SD card and plays it back through the browser (if SD card support is
provided).

DS1099-024B 14
: Access to the device settings menu to customise the settings of various parameters.
: For snapshot, video file type and storage path settings.
: Help information (current user, Web browser and plug-in versions) and logout button for returning to the
login page.
: Stop/Start Live video.
: Preview frame ratio adjustment, toggling between Original Ratio, Automatic Ratio and Full Screen.
: Preview control buttons - Open Video, Snap, Zoom-In/Out, Sound On/Off,
Microphone (from left to right).
: Dynamic switching of the bit stream for the preview frame.
7.1 PTZ CONTROL
: (PTZ control) select the icon to open the following window:
On Autofocus cameras with AF optics, the PTZ interface will be as follows:

DS1099-024B 15
Eight different angles can be selected on the circular control,
•PTZ Speed: 0 –10 indicates different PTZ speeds,
•ZOOM zooms in and out
•FOCUS increases or decreases FOCUS
•Restore: resets default settings
On Auto Focus cameras with DF optics, the PTZ interface will be as follows:
Option
Value
Explanation
Zoom
Step/-/+
Manually adjusts zoom (+ zoom in / - zoom out)
Step: defines zooming speed
Focus
Step/-/+
Manually adjusts focus (+ increase / - decrease)
Step: defines focusing speed
AF MODE
SEMI AUTO 
MANUAL OFF
This function is used to customise the camera focusing
mode. Possible options are:
SEMI: focusing is performed only after the zooming
operations are finished.
AUTO: focusing is adjusted automatically.
MANUAL: focusing is adjusted manually.
OFF: focusing and zoom are deactivated. Activate this
option after having adjusted focus and zoom as required
(recommended choice).
ONE SHOT AF
/
Function not available.
TDN AF
ON OFF
This function, when activate, allows automatic focus
adjustment at each day->night or night->day switch.
POWER MODE
SAVE POSI OFF
WIDE
This is used to adjust the zoom whenever the camera is
switched back on.
SAVE POSI: this holds the zoom position set before the
camera was switched off.
OFF: do not save the settings stored before switch-off.
WIDE: the camera is switched on in Wide mode.
AutoFocus
/
Adjusts focus automatically
Restore
/
Resets PTZ interface default settings (including focus)
Refresh
/
Updates the PTZ interface with changes to parameters
(including focus)

DS1099-024B 16
8 LOCAL SETTINGS
Select Local Settings to access the following dialogue window: here you can set the video storage location, paths for
downloading remote files and storing snapshot images, the file type (RF by default, with H265, AVI, MP4 or BMP
encoding), video recording duration and screen capture file type (BMP or JPG).

DS1099-024B 17
9 PLAYBACK
Select Playback in Record File, select the corresponding date, then Search to go to the page shown below.
Explanation of the button functions:
Type of recording file: ALL, Normal, IO, Intelligent.
Normal: 24H recording
(IO) alarms: Motion and Alarms.
Intelligent: see the chapter on intelligent video analysis.
：from left to right, Play/Pause, Stop, Advance one frame,
(select once to play one frame), Record, Capture, Download, Zoom, Audio control.
：from left to right, Zoom, Original proportions, Increase scale, Full screen.

DS1099-024B 18
10 REMOTE SETTING
10.1 DISPLAY CONFIGURATION
10.1.1 LIVE
Select Remote Settings to open the page shown below (default preview settings page):
Name: name of the IP camera.
Flicker control: choose 50Hz or 60Hz.
Transparency: choose the display transparency of the channel name and time on the preview frame (the lower the value,
the greater the transparency).
Show Name: the camera name is displayed.
Show Time: the date and time are displayed.
OSD: the red text on the frame; the channel name and time display can be repositioned by dragging them in the preview
frame.

DS1099-024B 19
10.1.2 IMAGE CONTROL
Select Image Control in Display to open the following page:
IR-CUT Mode: GPIO Automatic, Colour and Black and White.
IR-CUT Delay: IR-cut switching delay.
Lens Flip: On/Off.
Angle Flip: On/Off.
Corridor Mode: On/Off.
Angle Rotation: 0° or 180°.
Black Light: On/Off.
3D Noise Reduction: Off, Automatic, Manual.
Level: from 0 to 255.
WDR: On/Off.
AGC: OFF, Low, Medium, High.
White Balance: Automatic, Manual, Internal.
Shutter: Automatic, Manual.
Defog Mode: Off, Automatic, Manual.

DS1099-024B 20
10.1.1 PRIVACY ZONE
Select Privacy Zone in Display Configuration to open the following page:
Enable Privacy Zone, and then use the right mouse button to trace rectangles around areas not to be displayed during recording,
in screenshots and in Live viewing.
Save when done to keep the settings.
10.1.2 ROI
Select Display to open the following page:
ROI setting procedure:
1. Choose a region of application.
2. Press and hold the left mouse button and drag out a ROI (only one ROI can be set for each zone),
3. Select Save to apply the ROI.
Region ID: Up to 8 ROI zones can be set in one bit stream.
Enable Region: Enable or disable the ROI.
ROI level: Select a bit stream for the ROI from worst (), worse (), bad (), normal (), better () and best ().
Non-ROI frame rate Fps: Set the frame rate outside of the ROI; the smaller the value, the higher the image quality in the
ROI. The frame rate range depends on the video standard and the resolution. It varies from 1 to 25 Fps. (Note: Different
non-ROI frame rates may be given to different ROIs, but the lowest value among them will be used as the frame rate
applied to the non-ROI area on the preview frame.