Avtech AVX920 User manual

377Z
x920_V0.9
TVI Converter
TVI CONVERTER
OUTPUT
DC12V/0.8 A
DC5V, 12V/2A
INPUT
STATUSTVI INPUT
VIDEO
OUTPUT
Please read the instructions thoroughly before using the product.
C
CA AU UT TI IO ON N
R
RI IS SK K O OF F E EL LE EC CT TR RI IC C S SH HO OC CK K
C
CA AU UT TI IO ON N: :
To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.
Only operate this apparatus from the type of power source indicated on the label.
The company shall not be liable for any damages arising out of any improper use, even if we have been advised of the possibility of
such damages.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence
of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
This exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
ROHS Announcement
All lead-free products offered by the company comply with the requirements of the European law on the Restriction
of Hazardous Substances (RoHS) directive, which means our manufacture processes and products are strictly
“lead-free” and without the hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected
separately at the product end-of-life. This applies to your product and any peripherals marked with this symbol. Do
not dispose of these products as unsorted municipal waste.
CE Mark
This apparatus is manufactured to comply with the radio interference.
The company does not warrant that this manual will be uninterrupted or error-free. We reserve the right to revise or
remove any content in this manual at any time.

OVERVIEW
This device is designed to convert the TVI video signals to normal CCTV signals, allowing an installer to use his
CCTV tester monitor for angle and focus adjustment during camera installation.
PACKAGE CONTENT
TVI Converter User Manual RCA cable
USB power cable RCA-BNC cable Power cable
HARDWARE
Power to
camera
Press for 3 seconds to supply power (DC12V) to the connected TVI camera;
press again for 3 seconds to stop camera power supply.
OUTPUT Power to TVI
camera Connect to a TVI camera with the supplied power cable for power supply.
LED indicator
(Green)
Green light flashes for 3 times when this converter is connected to power;
the light flashes again when this converter is powered on.
Green light shows when a TVI camera is connected successfully; no light
shows when the camera is disconnected.
LED indicator
(Red)
Red light flashes for 3 times when this converter is connected to power;
the light flashes again when this converter is powered on.
Red light shows when is pressed for 3 seconds to supply power to the
connected camera; no light shows when the camera power is off.
TVI INPUT Camera video
input
Connect a TVI camera with the supplied RCA-BNC cable.
Note: This converter only supports 1080P TVI cameras.
Zoom to focus Press to zoom into the top left corner for focus adjustment.
INPUT Power to TVI
converter
Connect to a mobile power bank with the supplied USB power cable for
power supply, or connect to a CCTV tester monitor for power supply if the
CCTV tester monitor supports.
This converter supports DC12V/1A and DC5V/2A power.
VIDEO OUTPUT Camera video
output
Connect to a CCTV tester monitor with the supplied RCA cable for angle and
focus adjustment.

CONNECTIONS
* Not supplied in the sales package.
SPECIFICATIONS
Video Input 1080P TVI camera
Video Output CVBS Output (1vp-p) / 75 ohm
Power Input DC12V / 1A DC5V / 2A
Power Output DC12V / 0.84A (max) DC12V / 0.56A (max)
Power Consumption < 1.5W (Without camera connected)
Status Indicators One green light for camera connection status, and
one red light for power output status
Dimensions (mm)** 92(L) x 68.93(H)
* The specifications are subject to change without notice.
** Dimensional Tolerance: ± 5mm