Avtech VGA02A User manual

27Z
VGA02A_02_V1.3
* Please read instructions thoroughly before operation and retain it for future reference.
SPECIFICATIONS
MODEL 1 MODEL 2
Connection DVR Side: MONITOR OUT
Monitor Side: D-Sub (VGA)
Output Resolution
Two Options selectable:
> 1024×768@60Hz
> 1280 x 1024@60Hz
Up to 1024×768@60Hz
Analog non-interlaced RGB Output
Support YES
NTSC / PAL System Auto Detection YES
Power External adaptor DC12V
@ 0.5A
External adaptor DC5V
@ 0.5A
Power Consumption (±10%) 2.5W 2 W
Dimensions (mm)** 87(L) ×64(W) ×24(H)
* The specifications are subject to change without notice.
** Dimensional Tolerance: ± 5mm

CONNECTION
STEP1: Monitor Connection
Connect the monitor’s VGA D-Sub connector to the VGA jack of the VGA converter (A to A).
STEP2: DVR Connection
Connect the VGA converter with a RCA cable with BNC connector, or a coaxial cable to
DVR’s main monitor output jack (B to B).
STEP3: Power Connection
Connect the power connector of the VGA converter to the regulated power adapter (C to
C), and plug the adapter to the power outlet.
RESOLUTION SWITCH (Model 1 Only)
STEP1: Turn the VGA converter to the rear side, and find a pinhole as indicated below.
STEP2: Insert a paper clip to the pinhole as indicated below to switch the VGA output resolution
to 1024×768, or 1280 x 1024. The current resolution will be shown on your LCD monitor.