1/3" Pixelplus 1099K CMOS
2:1 Interlaced
Internal
976H*496V
Auto
0Lux(IR ON)
139.5*64.5*70mm
285g
24Units infrared LED
75feet
3Lux
IP66
-20 55℃- ℃
700TVLines
3.6mm
20cm
Auto
Auto
Ext
>47dB(AGC off)
1.0Vp-p composite video,75Ω
DC12V/200mA,2.4W
DC12V 10%±
1 Using the foam pat to locate holes in the wall
2
3
Drill 3 holes in the position needed in accordance with the installation hole on the
subpanel of the bracket,push the expansion bolt inside then tighten the screws,make
the installation hole aim at the four screws and fix it.
Camera installation
Get the wire out from the bottle of the bracket.
Assembly instruction of 3D cable bracket
L-shape spanner
Fixed loop
Screw 1
Screw 2
Figure 1
Figure1:Take the screws out of the accessories pouch and use L-shape spanner
to assemble.
Adjustment instruction of 3D bracket
Figure 4
Figure 3
Fixed loop
Figure 2
Figure 5
Screw 2
Screw 3
Figure 2,loosen the screw3
and the fixed loop to rotate 360°
Figure 3,loosen the screw3
and the fixed loop to rotate 360°
Screw 2
Screw 3
Figure 4 and 5,loosen the screw2 to rotate 180°
from up to down or from left to right
