For multiple domes in a single installation, it could be informative to
assign name to every dome with location info. label may contain
alphanumeric values:
- Enter OSD and select SYSTEM SETTING
- Select EDIT DOME LABEL and enter the sub-menu
- Select DOME LABEL and enter with [RIGHT] or [IRIS OPEN]
- The input character starts to flash, use [UP] or [DOWN] to select the desired
character and [RIGHT] for next input.
- Available characters appear in following order:
- Use [LEFT] to move to previous character when edit.
- In case you need to delete a character, use the “SPACE”-character (Empty sign).
- When finished, press [IRIS OPEN] to save, or use [RIGHT] to move to last
character and next to exit the editing mode.
- To dicard the setting, press [IRIS CLOSE] to exit.
- Select “BACK” to exit to “SYSEM SETTING” menu.
“0” to “9”, ”A” to “Z” , “:”, “<”, “>”,”-”
“{SPACE}” (empty sign).
Zon e
lab el
Dir ec ti on
lab el
Pre set
lab el
Tim e
Dat e
Zoo m ratio i ndica tor
Pelco
