Avue AV830SDIR User manual

AV830SDIR
adopts advanced image processing technology.Resolution is as high as 00TVL7
realize clear and sharp image.
480 TV Line 700 TV Line
1. Dome Enclosure: to protect camera lens and body.
2. Glass cover screw hole
3. Base
4. Wire out hole
5.Stages of a screw the lid
6. OSD
7.IR LED
8.LENS
9. Four install screws holes
1
2
3
4
5
6
7
8
9
DESCRIPTION
Thank you for your purchasing this product. Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
PRECAUTIONS
FEATURES
PARTS INSTRUCTION
(at bottom of the base)
FAR NEAR
TELE WIDE
AV830SDIR has advanced image processing technology with resolutions as high as
700TVL and advanced digital wide dynamic range, HS-BLC etc. To ensure a clear
and bright picture the AV830SDIR comes with a powerful OSD menu that includes
brightness contrast and color saturation adjustments, multi-area BLC white balance,
AGC and other functions. Mirror motion detection, privacy and other functions make
the AV830SDIR suitable for various special environments. A waterproof and vandal
proof design, combined with a 3-axis directional bracket allows for customized
viewing, 24hour monitoring and simple operation.
1. Make sure to use the appropriate power supply when installing the AV830SDIR, the
input power is DC12V/AC24V.
Be sure to connect the wires correctly, incorrect installations of the power source may
cause malfunction and/or damage to the video camera.
2. Do not attempt to disassemble the camera unit as eclectic shock may occur.
Do not remove the cameras set screws or cover, the camera has no serviceable internal
parts. If service is required seek out a qualified technician.
3 .Handle the camera with care; avoid dropping, striking or impacting the camera as this
could result in damage to the unit.
4. Do not store the camera incorrectly or expose it to rain or moisture.
Do not place the cameras in the following locations:
Locations with temperatures lower then -10C or higher than 50C
Locations with humidity that exceeds 95%
Locations with large amounts of water vapor or steam.
5. Clean the CCD faceplate with care.
When cleaning the CCD use only a soft cloth or piece of lens paper. Ethanol may
also be used.
6. Do not aim the camera at the sun or any bright light source as this may damage
the CCD.
7. Do not install the cameras near equipment that emits strong electromagnetic
fields such as wireless communication devices. This interference may cause
pictures irregularity and static on the video monitor.
1/3 Sony Ex–view HAD CCD is employed by the AV830SDIR.
The Sony Ex-view comes with advanced WDR compensation which greatly
improves image quality when dealing with higher levels of contrast.
Advanced Digital Signal Processing Technology
Higher brightness, by design and an extended LED life
High Resolution
Horizontal 700TVL resolution
HS –BLC
Automatic light filter for better contrast in bright light, higher image quality
and better image control.
DC12V/AC24 Duplicates Supply Design
Automatic power motoring and shifting from DC12V and AC24V
Waterproof and vandal proof
Waterproof, dust proof and vandal proof
Motion Detection
Video motions detection functionality with a Blue LED highlight. Quality alarm
effects
3 Axis Bracket
Internal 3-Axis directional bracket, fully adjustable with easy operation
OSD Menu
Powerful menu options that control all /functions of the camera

OSD function set:
Menu: choose function or back to last level.
Up/down: Up or down to move vertically.
Left/right: to move left or right horizontally or modify parameters, means with
subordinate
menu set.
Camera installation
Adjustment for camera direction
Appearance size
Setup Menu operation
Specifications
* .Specifications subject to change without notice
In camera the key to set the camera
Main menu
LENS
SHUTTER/AGC
WHITE BAL
MANUAL
ANTI CR
PUSH
OFF
HLC
MIRROR
CONTRAST
HUE
OFF
OFF
OFF
OFF
COLOR
OFF
AUTO
AUTO
AWC-SET
USER 2
MANUAL
BLC
BIGHTNESS
SHARPNESS
GAIN
ON
ON
ON
B/W
ON
ON
BACKLIGHT
PICT ADJUST
ATR
MOTION DET
PRIVACY
DAY/NIGHT
NR
CAMERA ID
LANGUAGE
CAMERA RESET
SAVE
EXIT
MANUAL
ATW
USER 1
AUTO
107 mm
150 mm
700 TVLines
PAL:752(H)*582(V)/NTSC:768(H)*494(V)
Internal
Lightness/Contrast/Sharpness/Tone/Saturation
1/3″SONY Ex-view HADⅡCCD
1120g
-10℃~50℃
DC ICR 2.8mm~11mm
DC12V/AC24V
DC12V/600mA,AC24V/5.6W
D
R
To install the AV830SDIR loosen, using a screwdriver the 3 external screws that secure the
glass dome-cover. Remove the glass dome-cover and then loosen the internal set-screws
and separate the subpanel from the camera body. Use the Subpanel as a guide and mark
3 holes on the surface where you intend to install the camera. Remove the subpanel and
drill these 3 holes. (Please make sure that the surface you attach the camera too is sturdy
enough to support the screws and the camera). Place wall fasteners in the three holes,
place the subpanel on top of the wall fasteners, making sure the holes line up with the
fasteners. Place one screw though the Subpanel and into the fastener and then tighten
with screw driver.In regard to wiring the AV830SDIR come with a default, vertical wiring
configuration. The AV830SDIR also comes with a front set screw that can be removed for a
horizontal wire configuration. Be sure to pre-set your configuration, prior to install to avoid
damaging the wiring harness.
After installation is complete you can now adjust the camera and the field of view. The
maximum vertical rotation the AV830SDIR is 355 degrees, maximum horizontal rotation
is 35 degree and the maximum dipping rotation is 355 degrees. To adjust the ZOOM,
locate and adjust both the Zoom and Focus adjustment levers, which are located on the
camera module inside of the dome cover. Once you have achieved the desired zoom
and focus lock the two adjustment levers by placing a small screwdriver into the locking
setscrew hole, located just below the camera module.
IP Rate IP 66