AWA MSDV1962-O4 User manual

MSDV1962-O4
19" 47cm HD LED LCD Television
USER MANUAL
Thank you for purchasing this LCD TV. Before connection and operation of this
product please read the manual carefully and completely.
Please keep this manual for future reference.
N294
Version 1.1

Contents
-1-
INTRODUCTION..............................................................................1
SAFETY AND WARNINGS............................................................. 2-4
BASE STAND ASSEMBLY INSTRUCTION..........................................5
WALL MOUNTING INSTALLATION GUIDELINES................................5
INSTALLATION............................................................................6-9
REMOTE CONTROL.................................................................10-11
OPERATION.............................................................................12-21
ELECTRONIC PROGRAM GUIDE (EPG MENU)................................17
PERSONAL VIDEO RECORDER (PVR)............................................18
DIGITAL MEDIA PLAYER (DMP)...................................................... 21
TROUBLE SHOOTING................................................................... 22
TECHNICAL SPECIFICATIONS.......................................................23

-2-
SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION
CAUTION
This symbol indicates that dangerous
voltages, constituting a risk of electric
shock are present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
WARNING:
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings,
install in accordance with the instructions.
8) Do not install near any heat sources such
as radiators, air conditioners, stoves, or
other apparatus (including amplifiers) that
produce heat.
9) Protect the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
10) Only use attachments/accessories
specified by the manufacturer.
11) Unplug this apparatus before lightning
storms or when unused for long periods of
time.
12) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
13) The Mains plug is used as the power
disconnect device, and the disconnect
device shall remain readily accessible and
operable.
14) The ventilation should not be impeded
by covering the ventilation openings with
items such as newspapers, table-cloth,
curtains, etc.
15) No naked flame sources, such as
lighted candles, should be placed on or
near the apparatus.
16) This device is not warranted for use in
unreasonably hot, cold, or humid
environments.
17) The apparatus shall not be exposed to
dripping or splashing and no objects filled
with liquids, such as vases, shall be placed
on or near the apparatus.
This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user
accessible parts. When servicing use only
identical replacement parts.
The batteries shall not be exposed to
excessive heat such as sunshine, fire or
the like.
WARNING:

-3-
High voltages are used in the operation of this
television receiver. Do not remove the cabinet
back from your set.
Refer servicing to qualified service personnel.
To prevent fire or electrical shock hazard, do not
expose the television receiver to rain or moisture.
Do not drop or push objects into the television
cabinet slots or openings. Never spill any kind
of liquid on the television receiver.
Do not block the ventilation holes in the back
cover.
Adequate ventilation is essential to prevent
failure of electrical components.
Do not trap the power supply cord under the
television receiver.
Never stand on, lean on, or suddenly push the
television or its stand. You should pay special
attention to children. Serious injury may result if it
falls.
Do not place your television on an unstable cart,
stand, shelf or table. Serious injury to an individual,
and damage to the television may result if it falls.
When the television receiver is not used for an
extended period of time, it is advisable to
disconnect the from the AC outlet.AC power cord
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
the television.
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.
Dim:515*320mm(）
SAFETY AND WARNINGS

-4-
SAFETY AND WARNINGS
CAUTION
Never tamper with any components inside the TV, or any other adjustment controls not mentioned in
this manual.
All LCD-TVs are high voltage instruments. When you clean up dust or water drops on the LCD
PANEL or CABINET, the power cord should be physically removed from the mains outlet. You may
then wipe the TV with a dry soft cloth. Before thunder and lightning events arrive, unplug the power
cord and antenna cord to prevent damage to your TV. All repairs to this TV should only be
performed by qualified TV service personnel.
Warning: Change or modifications to this unit not expressly by the part responsible for compliance
could void the user 's authority to operate the Equipment.
a. Do not expose to dripping or splashing.
b. No objects filled with liquids, such as vases, shall be placed on or near the apparatus.
C. is used as the power disconnect device and shall remain readily
accessible and operable.
d. No naked flame sources, such as lighted candles, should be placed on or near the apparatus.
e. Allow suitable distances around the apparatus for sufficient ventilation. Ventilation should not be
impeded by covering ventilation openings with items such as newspapers, table cloths, curtains and
such like.
The mains plug of this device
The display panel is a very sensitive high technology product, giving you finely detailed
pictures. Occasionally, a few non-active pixels may appear on the screen as a fixed point of
black, blue, green or red. Please note that this does not affect the performance of your product.
About After- Image:
The extended use of fixed image programme material can cause a permanent after - image on
the screen. This background image is viewable on normal programs in the form of a stationary
fixed image. This type of irreversible screen deterioration can be limited by:
A. Reduce the brightness/contrast setting to a minimum viewing level.
B. Do not display any fixed image for extended periods of time.
C. Turn the power off when not in actual use.
Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed
Image Displays.
Do not allow a still picture to be displayed for an extended period, as this can cause a
permanent after-image to remain on the screen.
Examples of still pictures include logos, video games, computer images, teletext and images
displayed in 4:3 mode.
CAUTION:
The permanent after-image on the screen resulting from fixed image use is not an operating
defect. This product is not designed to display fixed images for extended periods of time.

-5-
INSTALLATION
Base Stand Assembly Instruction
Place the TV with the display side down on a flat surface. Ensure the table or desk you use provides
a flat, totally clean surface.
Use a cloth between the face of the TV and the table to protect the TV's screen.
1. Locate the bottom bracket into the gap in the bottom of the TV, and secure it using the supplied screw,
as per a) below.
2. Gently slide the now-affixed bracket at the bottom of the TV into the slot in the base stand. Secure
the base stand using the supplied thumb-screw, as per b) below.
WALL MOUNTING INSTALLATION GUIDELINES
For wall mounting with an optional bracket, please read the following instructions in conjunction with the
bracket's instructions. Make sure qualified service personnel perform the operation.
This television can be wall mounted as follows:
1.Place the LED LCD Television face down onto a solid surface. Please place some soft material over
the front of the screen to protect it from any damage. The LCD panel is a fragile component, and must
be suitably protected when removing the base stand. Be sure that no hard or sharp objects can come
into contact with the screen's surface. Do not exert pressure on the front of the unit at any time, as this
may damage the LCD screen.
2.Remove the screw from the lower part of the television, where the base joins to the TV, and take
away the stand (put the stand and screw somewhere safe for future use).
3.Use the four M4 screws provided to fix the TV onto a wall mounting bracket (not included) via the
four VESA standard holes on the back of the television.
75mm x 75mm VESA
wall mounting hole spacing
and locations
a) b)
Thumb-screw

INSTALLATION
-6-
Front panel
KEYBOARD
1 SOURCE
2
4
STANDBY
．：
Displays the input source Menu.
CH+" or "CH-" to select items.
press "VOL+" or "VOL-" to
Once the TV's main power switch has been activated, press this button to turn the
unit ON from STANDBY mode.
Press it again to return the set back to STANDBY.
．：
．
．
MENU
3 CH+/CH-
VOL+/VOL-
5.
Displays the main MENU.
In TV mode, press "CH+" or "CH-" to change the channel up or down.
In MENU mode, press "
Adjusts the sound level.
In MENU mode, adjust the item that you have selected.
30 30
1
3
2
The remote control needs to be pointed directly,
within +/- 30 , of the sensor on the front of the
TV for reliable operation.
There will be a 5-10 second delay between
the power indicator LED changing state and the
TV responding.
NB.
SOURCE (Input selection)
MENU
CH+
CH-
VOL+
VOL-
STANDBY (Power ON/Stand-by select)
4
1: Remote control sensor.
2: Indicator LED:
BLUE = POWER ON.
RED = Stand-by.
3: Key board (on side of TV).
4: Main power switch (on bottom
panel of TV)
VOL CH
YPbPr CC MTS VGA
DTV
STRENGTH
TV AV HDMI
EPG
CHLISTCHLIST FAV
TV
DISPLAY
S.M
P.M

INSTALLATION
-7-
ANTENNA
Note:
Aerial connections: IEC (PAL-type, female).
Input impedance: 75 unbalanced.
REAR AV Connections
All the terminals are (from left to right):
YPbPr (component video) inputs, L+R Audio inputs,
, (composite video and L+R audio).
Note: 1. VIDEO and YPbPr share the same L+R audio inputs.
2. The AV output sockets are only functional during DVD operation.
AC POWER INPUT, AV composite video
input AV output
SIDE AV Connections
All the terminals are (from left to right):
USB, HDMI2 input, HDMI1 input, HEADPHONE output, PC Audio input, VGA input,
Note: 1. When the HDMI1 input receives a DVI signal, the matching audio signal is received
by the PC Audio input.
2. When the HDMI2 port receives a DVI signal, the matching audio signal is received
by the YPbPr/AV Audio input.
Antenna socket.
Plug (not supplied)
Outdoor antenna (not supplied)
For optimum digital TV reception,
the use of high quality shielded 75
coax cable is recommended.
POWER
YPbPr
RL
VIDEO RLVIDEO
AV OUT PUT
AC Input
100-240V~ 50/60Hz

PC
-8-
INSTALLATION
PRESET MODE
1
2
3
4
5
6
7
720*400
640*480
800*600
800*600
800*600
1024*768
1024*768
70
60
56
60
72
60
70
31.47
31.47
35.156
37.88
48.08
48.36
56.48
RESOLUTION V.Freq.(Hz) H.Freq.(kHz)
STEPS:
Be sure both the TV and computer are
set to Power off.
1.Connect a VGA and audio cable.
2.Connect the power cord.
3.Power on the TV, switch to PC mode.
4.Power on the PC.
This connection and power-up sequence
is very important.
VGA and audio cable
not supplied
The above resolutions are the only ones guaranteed to be supported. Other resolutions up to
1920 x 1080 may also be supported, but this must be assessed by the user on a case-by-case
basis. This is also subject to the limitiations of the computer’s video card.

INSTALLATION
-9-
AV EQUIPMENT
W R
Yellow (Composite video)
White (audio L)
Red (audio R or Pr)
Y
W
R
Blue (Pb)
Green (Y)
B
G
VIDEO EQUIPMENT with YPbPr output (Component video output)
GBRWR
W R
TO AUDIO OUTPUTS
VIDEO EQUIPMENT
TO VIDEO
OUTPUT
Your TV can be connected to the following appliances: VCR, multi disc player, DVD, camcorder,
video game console or stereo system, etc.....
YPbPr (component video) can support these video formats: 480i, 576i, 480p, 576p, 720p.
Use an HDMI connection to view 1080i/1080p material.
Y
Y
W R
W R
TO AUDIO INPUTS
VIDEO EQUIPMENT
TO VIDEO
INPUTS
Y
Y
You can use the input and output terminals on the TV set as follows.
WR
Audio GBRComponent video
HDMI
YPbPr
RL
VIDEO RLVIDEO
AV OUT P UT
- OR - N.B. Only one HDMI input can
be selected at a time.
VIDEO EQUIPMENT (Composite video output)

-10-
REMOTE CONTROLREMOTE CONTROL
REMOTE CONTROL
1: :To set the TV to standby or power on.
2: :In USB mode, used as reverse key, in teletext
mode used as subpage key.
3: : In USB mode, used as forword key, in teletext
mode used as reveal key.
4: :
5: :
6: :To enter or TELETEXT.
7: : To turn on subtitles press the subtitle button in DTV mode.
8 : : Displays the main on-screen menu.
9 : : To move within the menu.
10: : Confirms selection.
11: : To display information about the program being viewed
and what's on next in DTV mode.
12: : To access your favourite channels list in TV or DTV mode.
13: : To adjust sound level.
14: : For direct access to channels.
15: : To select the available audio language of TV programs .
16: : To disable or enable the sound output.
17: : In USB mode, used as next key, in teletext mode used as
list key.
18: : In USB mode, used as previous key, in teletext mode used
as hold key.
19: :In teletext mode used as index.
20: : Press to stop play in USB mode.
21: : To display the program information of the show you
are watching, press the info button.
22: Press to freeze the picture you are watching.
23: : Press to display and select the available video sources.
24: : To return to the previous menu or exit menu.
25: : To access the next or previous channels.
26: :
27: : DTV Mode: RECALL: Jumps to last channel viewed.
POWER
TEXT
SUBTITLE
CURSOR
OK
EPG
FAV
VOL+/-
NUMERIC KEY
AUDIO
MUTE
INFO
FREEZE:
EXIT
CH+/CH-
REC
RECALL
Press the Play Button in USB Mode to begin or continue Playback.
Press the Pause Button to pause play in USB Mode.
Press to record the TV program you are watching in
DTV mode
1
2
3
4
5
6
7
8
9
10
11
13
12
14
15
16
17
18
19
20
21
22
23
24
25
26
27
VOL CH
REC
FREEZE
Remote Control Battery Installation
The remote control requires two AAA batteries. Below are steps to
assist you with replacing the batteries.
1.Open the back cover of the battery compartment.
2.Install the batteries into the battery tray. There are +/- polarity
markings in the battery compartment. Please ensure the battery
polarity is correct.
3.Close the battery cover.
There are two battery cover types that may be used. Please
refer to picture 1 or picture 2 as applicable to the Remote Control
supplied with your TV.
Note:
Picture 1:
Picture 2:

-11-
REMOTE CONTROL
TELETEXT
TEXT
SELECTING A PAGE
DIRECT ACCESS
TO THE ITEMS
INDEX
SUB PAGE
HOLD
REVEAL
Press: You will obtain:
LIST
Enter the number of the page required using the 0 to 9 up/down.
Example: page 120, enter 120. The number is displayed top left, the
counter turns and then the page is displayed. Repeat this operation to
view another page. If the counter continues to search, this means
that the page is not transmitted. Select another number.
Coloured buttons correspond to the colours at the bottom of the
screen. The 4 coloured keys are used to access the items or
corresponding pages. The coloured areas flash when the item or the
page is not yet available.
This returns to the contents page (usually page 100).
Certain pages contain sub-pages which are automatically
displayed successively. This key is used to stop or resume sub-
page acquisition. The indication appears top left.
To freeze the page.
To display or hide the concealed information (games solutions).
The user can set four favourite pages to be directly linked to the four
color keys. While list mode is activated, it is not possibility to use TOP
or FLOF navigation with the colourkeys. The favourite page numbers
should be stored and restored to/from nonvolatile memory for each
channel by the system software.
This is used to call or exit teletext modes. The summary appears with
a list of items that can be accessed. Each item has a corresponding
3 digit page number. If the channel selected does not broadcast
teletext, the indication 100 will be displayed and the screen will
remain blank (in this case, exit teletext and select another channel).
Teletext is an information system broadcast by certain channels which can be
consulted like a newspaper. It also offers access to subtitles for viewers with hearing
problems or who are not familiar with the transmission language (cable networks,
satellite channels, etc.)

-12-
OPERATION
Installation Guide
Press to select search type, then press to select country (eg. Australia), then press the OK
button to start auto tuning.
This screen only appears when the TV is turned on for the first time, or reset to factory settings. You can
choose language, country and auto tuning programs. After tuning, the screen will skip to the first DTV program.
1.CHANNEL MENU
The first item of the MENU is channel menu (for ATV or DTV source only). ATV = Analogue TV, DTV = Digital TV.
You can search channels and edit programs here.
1).Auto Tuning:
Search all the channels automatically (you can select ATV, DTV, or DTV+ATV searching).
ATV Manual Tuning
Programme Edit
Signal Information
< >
CHANNEL
Auto Tuning
DTV Manual Tuning
Software Update(USB)
Software Update(OAD)Off
Dansk
Deutsch
Hrvatski
Italiano
Please select an OSD Language
OK
Magyar
Nederlands
Norsk
PolskiEnglish
Cesky
E ka
Espanol
~
Fran ais
Portugues
Pycck
Austria
Belgium
Country
OK
Australia
Croatia Finland Greece Luxembourg
Czech France Hungary Netherlands
Bulgaria Denmark Germany Italy
Tune Type DTV+ATV
MENU
Austria
Belgium
Australia
Croatia
Czech
Bulgaria
Finland
France
Denmark
NOTE:
All the channels including ATV, DTV and Radio can be tuned at once, if the Tune Type is set to DTV+ATV.
Any previously stored channels will be deleted after auto tuning is carried out.
After auto tuning, the receiver will skip to the first DTV channel.
The radio channels are the ones provided by some TV stations. This unit does not receive
DAB+Digital Radio broadcasts.
Channel Tuning
TV : 0 Programme(s)
DTV : 0 Programme(s)
Radio : 0 Programme(s)
96% UHF CH 68 DTV
To select the MENU mode, press the menu button on the side keyboard of the TV, or press the TV/menu button
on the remote control.

2).DTV Manual tuning:
You can select a DTV channel then find the program in this channel.
Press to select the channel, then press OK to search the programs .
OPERATION
NOTE:
The Bad Normal Good bar graph on this screen shows signal intensity during DTV reception only.
3). ATV Manual tuning :
You can change the sound system, search the analog TV channels and fine tune them, then store the
channels you selected. In Australia, select the BG sound system.
""
ATV Manual Tuning
Storage To 1
System BG
Current CH 1
Search
Fine-Tune
Frequency 255.25 MHz
Save MENU
_+
DTV Manual Tuning
VHF CH 5
_+
Bad Nomal Good
Press OK to search
NOTE:
Press the teletext red button on the remote control to store the channels after manual tuning.
4).
You can Delete, Rename, Move, Skip, or FAV most TV programs.
Program edit:
-13-
Rename:
You can only rename ATV programs.
Move the cursor to the program, press the teletext green button to rename the program.
Press to choose the character. Press to move the cursor .
Press MENU button to exit edit, Press EXIT to exit the menu.
Note: ATV program names can only be 5 characters long, DTV program names can be up to 25 characters.
Press to choose the program, press the teletext blue button to skip this program, the symbol will
show on the right side of the program.
Choose the skipped program, press the blue button again, you can cancel the skip and the symbol will
disappear.
Delete
Press the teletext red button, the program in the cursor will be deleted.
Favourite
Press to choose the program, press the FAV button and it will show on the right side of the program.
Choose the FAV program, press FAV button again, you can cancel the FAV and will disappear .
Once your favorite group is created, you can press the FAV key to quickly access your favourite channel.

-14-
OPERATION
The second item of the MENU is PICTURE MENU.You can adjust picture effects here, such as contrast,
brightness, etc.
Press to move, press OK to adjust.
2. PICTURE MENU
Color Temperature
Aspect Ratio
Noise Reduction
Screen
Picture Mode Standard
< >
PICTURE
MENU
Picture Mode Standard
Contrast 50
Brightness 50
Color 50
Sharpness 50
Tint 50
Color Temperature Medium
Red 50
Green 50
Blue 30
MENU
NOTE:
1).Tint is available in NTSC system only.
2).There are four color temperature modes that can be selected: medium, warm, cool, user.
3).The Screen option is only available once the Input Source is set to PC , which allows you to adjust
Horizontal position, vertical position, size and phase or select an Auto Adjust mode.
""
TV default mode seting is standard mode and it is recommended for end used watch at home.""
3.SOUND MENU
The third item of the MENU is the SOUND MENU.
You can adjust the sound effect here such as treble, bass, balance etc.
Press to move, press OK to adjust.
< >
Balance
Auto Volume
Sound Mode Standard
SOUND
Note:
Auto volume: only available when the input signal volume is too large or there is distortion.
4.TIME MENU
The fourth item of the menu is the TIME MENU. You can adjust the clock, power on/off time, sleep time etc
Press to move, press OK to adjust.
Off Time
On Time
Sleep Timer
Auto Sleep
Time Zone
Clock -- -- -- --
TIME
< >
Displays the signal information in DTV (digital TV) mode only.
Do not attempt to use this option unless you have a valid software program for the
TV stored on a compatible USB drive, and the drive is connected to the TV. Please remove
the antenna cable from the TV RF port, go to the channel Menu, select Software Update (USB) and press
OK to run the software update.
5). Signal Information:
6). Software Update:
WARNING:
""
MSDV1962-O4
NOTE:
The clock time is automatically set by the Digital TV transmissions.

< >
PVR File System
OSD Language English
OPTION
Audio Languages
Subtitle Language
Country Australia
Restore Factory Default
Check PVR File System Start
USB Disk
Format
Time Shift Size
Speed
Free Record Limit 6 Hr.
Select Disk C:
In PVR File System Sub-menu you will be asked to format your USB 2.0 drive or Hard Disc for PVR
Operation. If you are not familiar with the various drive or partition options for storage devices, start this
process using a blank (ie. unused storage device), or one which does not hold sensitive or required data.
Select Disc
To view and select the USB file or the allocated space on your Hard Disc that you would like to record to,
press OK button to enter the Select Disk sub-menu and then press or buttons on your remote control
to select the particular partition/file for recording.
Press the Menu Button to return to the Main Menu.
Check PVR File System
Press the OK Button to start checking the file system of your USB storage or Hard Disk. Once SUCCESS
is shown after checking, you will then be able to begin recording or use the Time Shift function. If FAIL is
shown after checking, you then need to format your USB drive or Hard Disc before being able to record or
use Time Shift feature.
Format
When you format your USB drive or Hard Disc partition any saved data will be lost. Please ensure
that you start with a blank partition on your Hard Disc to ensure you don't lose any data.
PVR File System Type
There are two types of supported formats: FAT32 and Hi Speed Format. You can press or buttons to
choose the type of formatting. If FAT32 is selected, you will have to format the whole size of your USB
drive or the allocated partition for recording. If Hi Speed Format is selected, you will then be able to
press or buttons to select the size you wish to use (for example 1G, 10G, 20G... or All). Once a
particular size is booked for recording, you will be able to use the remaining space of your USB drive or
Hard Disc for other data storage.
WARNING: Please note no matter which size is booked for recording, all the data in the allocated partition
of the Hard Disc will be lost after formatting.
Speed
This will show the supported speed of recording, and whether your storage device can support HD DTV
recording.
Record Limit
This will show the approximate time you will be able to record on to your USB drive or Hard Disc.
the
File System Size
PVR File System Type FAT32
MENU
PVR File System Size All
SD 13 Mins
HD 3 Mins
-15-
OPERATION
5.OPTION MENU
To enter the Option Menu, press MENU button and then press or buttons to select the Option Menu.
Once in Option Menu, press or buttons to select the settings you wish to adjust. Press MENU button
to return to the Main Menu.
NOTE:
Restore Factory Default will clear all the programs and password.

OPERATION
Press the OK button to enter the basic DMP (Digital Media Player) Menu and then use the or buttons
on the remote control to select the file playback type (eg. Photo, Music, Movie, Text), then press OK. You
can preview a selected file by highlighting it using the cursor arrows and pressing OK. Press the Play
button on the Remote Control to show it in full-screen size. Press the MENU/INFO button to bring up a
controls tab at the bottom of the screen, allowing easier control of play, pause, stop and repeat modes.
Press the EXIT button repeatedly to progressively return back to the DMP menu.
PHOTO MUSIC MOVIE TEXT
6.LOCK MENU
To enter the LOCK Menu, press MENU button and then press or buttons to select the LOCK Menu.
The default password is 6666.
Please set a new password so it is easy to remember. Follow the on screen steps to set your new
password.
Set Password
Lock System
LOCK
< >
Block Program
Parental Guidance NO Block
7. APPLICATIONS MENU
To enter the Applications Menu, press MENU button and then press or buttons to select the
Applications Menu. This is where you will be able to view and play various low data-rate USB media files
or DTV programs recorded using your TV.
< >
APPLICATIONS
DMP
The supported formats are as below:
Photo: JPEG (Press Play to start slideshow. For best results use 1920 x 1080 pixel images).
Music: MP3
Movie: Small AVI files (Not all .AVI formats are supported).
Text: TXT (eg. Windows Notepad).
Once the Parental Guidance mode is turned on, you can set viewing restrictions during DTV TV reception
based on the programs classification (eg. G, PG, M, MA etc).
NB. The viewing restrictions do not apply to the DVD player or ATV reception.
FACTORY RESET NOTE:
If you wish to reset your TV, please select the Restore Factory Default option, this will clear all settings.
-16-

OPERATION
-17-
Schedule List 04:55 28th Apr Delete
Time Date Programme Title Channel Name
3.
Press the Blue Button to book a DTV program for future viewing and add to the Schedule List.
Remind
802 SZTVM03
08 Minute
05 Hour
Apr Month
28 Date
Once Mode
Reminder setting
BACK
OK
_+
8.EPG Menu (Electronic Program Guide).
The EPG Menu is used to look at what is being broadcast by DTV stations. After you turn the TV on
and select the DTV input, your TV will commence receiving EPG data progressively over a period of
time (typically up to half an hour, depending on the number of stations being received). Press the
EPG Button to access the EPG Menu. You will receive detailed program information of the channel
you are currently watching as well as programs in the near future. Press the cursor to move to the
top of the EPG screen to the Programme Guide tab, then press the cursor to select either Time or
Channel listings.
In the Time mode, move the highlighted tab down to the date line using the cursor keys, then press
the cursor keys to select the desired reception date. Use the down cursor to move thru the
available programs for the selected date and time.
In the Channel mode, use the cursor keys to select the desired DTV channel, then scroll thru the
available programs into the near future. Once the selected program is chosen you can select to tag
it for either Remider or Record activity using the Blue or Red buttons, and then view the planned
activity in the Schedule List.
28 Apr 04:39
800 SZTVM01 No Information
801 SZTVM02
802 SZTVM03
803 SZTVM04
804 Date
No Information
No Information
No Information
No Information
PROGRAMME GUIDE TIME
Schedule
INFO Remind
OK INDEX
2.
Press the Yellow button to list all the stored reminder schedule, press to choose the list, press red key
to delete the schedule list, Press EPG to return to EPG menu.
Schedule
DELETE
1.
Use to select a program and then press the Green Button or INFO key on the Remote to display the
highlighted program's information (if transmitted by the TV station).
INFO
4.
Press the Red button to book a DTV program for future recording and add it to the Schedule List.
Record
Record

OPERATION
9. PVR function
1). Prepare to record the program
From OPTION MENU enter into the PVR File System and choose "check PVR File System". Click "OK",
and wait until "checking" changes into "Success".
Note: please check the result marked "Speed". If it is "HD support", that means the speed of your USB
device is suitable for time shift and record functions. If not, please format the device, to make sure the USB
device is capable of handling the recording functions. The default "Free Record Limit" is 6 hours, if the
space on the disk is big enough. If the space is not big enough, the record time will be shorter, depending on
the capacity of the device. During the "check PVR File System" checking, please do not take any other
operation until it is finished.
The recordings have to be done from within the TV PVR system. The recordings can only be played in
the same TV, and generally not in any other kind of devices (computer, DVD, etc...) which are not
compatible with the .TS file format.
In order to carry out any kind of recording, the TV will oblige you to format the connected USB device
to store the recording. The High Speed format option is recommended for better HDTV recording results.
WARNING. WHEN YOU FORMAT THE EXTERNAL USB DEVICE YOU WILL LOSE ALL THE FILES AND
INFORMATION STORED ON THE DEVICE.
From the OPTION MENU, enter into the PVR File System as below:
Select Disk: select which disc to save the record file onto, then press OK to return to the PVR menu.
Check PVR File System: check if the PVR File System set up will work with your USB device or not.
Format: Refer to the details on formatting on page 16 before using this option for the first
time. Once you have selected the type of formatting of your USB storage device, your TV
will show various progress screens (see next page).
< >
PVR File System
OSD Language English
OPTION
Audio Languages
Subtitle Languages
Country Australia
Restore Factory Default
MENU
Check PVR File System Start
USB Disk
Format
Time Shift Size
Speed
Free Record Limit 6 Hr.
Select Disk C:
Select Disk
USB 0
Disk C:
-18-