Axema C20 User manual

Axema Access Control AB | Box 90215 | 120 23 Stockholm, Sweden | [phone] | [e-mail] | www.axema.se
Alarm module C20
Alarm module C20 is used to control an external alarm system from VAKA
Manual (En)
Updated 2019-05-03

Alarm module C20
Connection 3
Terminals 3
Installation and configuration 3
2 (3) Manual (En) C20

Connection
1. Disconnect the controllers power.
2. Mount the module in any module position in the door controller
3. Mount the supplied connector under the module and connect it according
the terminal description.
4. Supply the controller with power.
Terminals
Terminal Function
1 Alarm relay (C)
2 Alarm relay (NO)
3 Alarm relay (NC)
4 +5V 20mA
5 Red LED +
6 Red LED -
7 ASF +
8 ASF -
Installation and configuration
This manual describes how the device is mounted and connected. For information
regarding installation and configuration please see https://info.axema.se?vaka.
3 (3) Manual (En) C20