Axent COLIN User manual

INSTALLATION INSTRUCTIONS
COLIN

DANGER! High Risk, Lethal Hazards, Severe Injuries
CAUTION! Low Risk, Minor Injuries
NOTE! Damage to Property
TARGET READERSHIP AND INSTALLER QUALIFICATIONS
Installation must be carried out by qualified professionals.
Repairs should only be performed by trained and qualified persons.
NOTE!
Follow all local installation regulations and country specific voltage and plumbing standards. DO NOT install the
intelligent toilet in rooms where there is a danger of frost. The room temperature and water temperature must
not be less than 4°C ( 39 °F ).
Condensation may form when the intelligent toilet is brought from a cold location to a warm one. Leave the unit
switched o for a few hours before operating.
DANGER!
Risk of fatal electric shock
The appliance must be grounded and plugged into a GFCI outlet.
DO NOT remove individual components from (inside of) the intelligent toilet.
If the unit has a damaged cord or plug, return the product to a service center for repair. The cord or plug may
only be changed by qualified personnel.
CAUTION!
DO NOT reuse old hoses. Please use new hoses and included components.
Axent Corp is not liable or responsible for damaged caused by 3rd party components.
TECHNICAL SUPPORT
For any questions or any assistance with this product, please contact your dealer or call us at
1-800-769-4857
[e-mail]
www.axentbath.us
i
i
COLIN
3

SC OPE O F DE LIVERY
Standard delivery contents
USER MANUAL
The below parts are not included with the toilet.
Wax RingFloor Mount Bolts
Inlet Hose and Filter
(Filter Adapter Requires 1/2"
Pipe Thread Connection.)
Remote control
Mounting HardwareT-branch Pipe
Installation
Manual
User
Manual
Main body
12" Flange
Adhesive
(optional)
Bowl
Mounting
Hardware
Bowl Plug
Battery
Remote control
Holder
AAA
AAA
5

6
1 2
3 4
5 6
1
COLIN
i
1
4
” -
8
”
9
“- 14“
12
”
1/2"Nominal Pipe Thread (NPT)
(Some 7/16" & 1/2" Slip-joint valve
stopsutilize 1/2" NPT.Verifymating
connection with the included filter
adapter first beforeinstallation)
11
- 24
““
12
“
- 24
“
-Please verify these dimensions before beginning
installation. These dimensions may vary in some
locations.
-Recommended operating pressure 20 - 100 psi.
From installed surface, if any
(ex: baseboards, tiles, etc.)
12
/

COLIN
7 8
9 10
11 12
When replacing the water line, please use a line that is
20 inches or longer.
5~15sec
Please run water until clear.
.
7
i
i
①
②

8
COLIN
12
1 2
3 4
2
Before installation of the remote control holder, please ensure the remote functions properly where the
holder will be installed. If the remote does not function properly, please move the remote closer to the
seat or to another location nearby.
ø 5mm
i

9
AAA
AAA
COLIN
7
5 6
8
910

10
1
COLIN
3
1
2
Please cover the spray arm during testing to avoid sprayed
Please check for leaks and drips before caulking
i

P/N:224000012501 2019/07/18
AXENT Corporation Ltd.
www.axentbath.us
[e-mail]
1-800-769-4857
Place serial number sticker here
for reference: