Axis Q60-S User manual

AXIS Q60-S Series
AXIS Q6042-S PTZ Dome Network Camera
AXIS Q6044-S PTZ Dome Network Camera
AXIS Q6045-S Mk II PTZ Dome Network Camera
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
ESPANÕL
ò
ò
¨
¨
¾
¾
Installation Guide
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

Legal Co sideratio s
Video surveillance can be regulated by laws that vary from
country to country. Check the laws in your local region
before using this product for surveillance purposes.
This product includes one (1) H.2 4 decoder license. To
purchase further licenses, contact your reseller.
Liability
Every care has been taken in the preparation of this
document. Please inform your local Axis ofce of any
inaccuracies or omissions. Axis Communications AB cannot
be held responsible for any technical or typographical errors
and reserves the right to make changes to the product and
manuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material
contained within this document, including, but not limited
to, the implied warranties of merchantability and tness for
aparticular purpose. Axis Communications AB shall not
be liable nor responsible for incidental or consequential
damages in connection with the furnishing, performance
or use of this material. This product is only to be used for
its intended purpose.
I tellectual Property Rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more of
the patents listed at www.axis.com/patent.htm and one or
more additional patents or pending patent applications in
the US and other countries.
This product contains licensed third-party software. See
the menu item “About” in the product’s user interface for
more information.
This product contains source code copyright Apple Computer,
Inc., under the terms of Apple Public Source License 2.0
(see www.opensource.apple.com/apsl). The source code is
available from https://developer.apple.com/bonjour/
Equipme t Modicatio s
This equipment must be installed and used in
strict accordance with the instructions given in the
user documentation. This equipment contains no
user-serviceable components. Unauthorized equipment
changes or modications will invalidate all applicable
regulatory certications and approvals.
Trademark Ack owledgme ts
AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX
are registered trademarks or trademark applications of Axis
AB in various jurisdictions. All other company names and
products are trademarks or registered trademarks of their
respective companies.
Apple, Boa, Apache, Bonjour, Ethernet, Internet Explorer,
Linux, Microsoft, Mozilla, Real, SMPTE, QuickTime, UNIX,
Windows, Windows Vista and WWW are registered
trademarks of the respective holders. Java and all
Java-based trademarks and logos are trademarks or
registered trademarks of Oracle and/or its afliates.
UPnPTM is acertication mark of the UPnPTM Implementers
Corporation.
SD, SDHC and SDXC are trademarks or registered trademarks
of SD-3C, LLC in the United States, other countries or both.
Also, miniSD, microSD, miniSDHC, microSDHC, microSDXC
are all trademarks or registered trademarks of SD-3C, LLC
in the United States, other countries or both.
Regulatory I formatio
Europe
This product complies with the applicable CE marking
directives and harmonized standards:
• Electromagnetic Compatibility (EMC) Directive
2004/108/EC. See Electromagnetic Compatibility (EMC)
on page 2.
• Low Voltage (LVD) Directive 200 /95/EC. See afety
on page 3.
• Restrictions of Hazardous Substances (RoHS) Directive
2011/ 5/EU. See Disposal and Recycling on page 3.
Acopy of the original declaration of conformity may be
obtained from Axis Communications AB. See Contact
Information on page 3.
Electromag etic Compatibility (EMC)
This equipment has been designed and tested to fulll
applicable standards for:
• Radio frequency emission when installed according to
the instructions and used in its intended environment.
• Immunity to electrical and electromagnetic phenomena
when installed according to the instructions and used
in its intended environment.
USA
This equipment has been tested using ashielded network
cable (STP) and found to comply with the limits for a
Class Adigital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is
operated in acommercial environment. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in
aresidential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.
The product shall be connected using ashielded network
cable (STP) that is properly grounded.
Canada
This digital apparatus complies with CAN ICES-3 (Class A).
The product shall be connected using ashielded network
cable (STP) that is properly grounded.
Cet appareil numérique est conforme àla norme
NMB ICES-3 (classe A). Le produit doit être connecté à
l'aide d'un câble réseau blindé (STP) qui est correctement
mis àla terre.
Europe
This digital equipment fullls the requirements for RF
emission according to the Class Alimit of EN 55022. The
product shall be connected using ashielded network cable
(STP) that is properly grounded. Notice! This is aClass A
product. In adomestic environment this product may cause
RF interference, in which case the user may be required
to take adequate measures.
This product fullls the requirements for emission and
immunity according to EN 50121-4 and IEC 223 -4 railway
applications.
This product fullls the requirements for immunity
according to EN 1000- -1 residential, commercial and
light-industrial environments.
This product fullls the requirements for immunity
according to EN 1000- -2 industrial environments.
This product fullls the requirements for immunity
according to EN 55024 ofce and commercial environments
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

Australia/New Zealand
This digital equipment fullls the requirements for RF
emission according to the Class Alimit of AS/NZS CISPR 22.
The product shall be connected using ashielded network
cable (STP) that is properly grounded. Notice! This is a
Class Aproduct. In adomestic environment this product
may cause RF interference, in which case the user may be
required to take adequate measures.
Japan
この装置は、クラスA 情報技術装置です。この装
置を家庭環境で使用すると電波妨害 を引き起こす
ことがあります。この場合には使用者が適切な対
策を講ずるよう要求され ることがあります。 本
製品は、シールドネットワークケーブル(STP)を
使用して接続してください。また適切に接地し
てください。
Korea
이기기는 업무용(A급) 전자파적합기기로서 판매
자또는 사용자는 이점을 주의하시기 바라며, 가
정외의 지역에서 사용하는 것을 목적으로 합니다.
적절히 접지된 STP (shielded twisted pair) 케이블
을사용하여 제품을 연결 하십시오.
Safety
This product complies with IEC/EN/UL 0950-1 and
IEC/EN/UL 0950-22, Safety of Information Technology
Equipment. The product shall be grounded either through a
shielded network cable (STP) or other appropriate method.
The power supply used with this product shall fulll the
requirements for Safety Extra Low Voltage (SELV) according
to IEC/EN/UL 0950-1.
Disposal a d Recycli g
When this product has reached the end of its useful life,
dispose of it according to local laws and regulations. For
information about your nearest designated collection point,
contact your local authority responsible for waste disposal.
In accordance with local legislation, penalties may be
applicable for incorrect disposal of this waste.
Europe
This symbol means that the product shall not be
disposed of together with household or commercial waste.
Directive 2012/19/EU on waste electrical and electronic
equipment (WEEE) is applicable in the European Union
member states. To prevent potential harm to human health
and the environment, the product must be disposed of in
an approved and environmentally safe recycling process.
For information about your nearest designated collection
point, contact your local authority responsible for waste
disposal. Businesses should contact the product supplier for
information about how to dispose of this product correctly.
This product complies with the requirements of
Directive 2011/ 5/EU on the restriction of the use of
certain hazardous substances in electrical and electronic
equipment (RoHS).
China
This product complies with the requirements of the
legislative act Administration on the Control of Pollution
Caused by Electronic Information Products (ACPEIP).
Co tact I formatio
Axis Communications AB
Emdalavägen 14
223 9 Lund
Sweden
Tel: [phone]
Fax: [phone]
www.axis.com
Support
Should you require any technical assistance, please contact
your Axis reseller. If your questions cannot be answered
immediately, your reseller will forward your queries through
the appropriate channels to ensure arapid response. If you
are connected to the Internet, you can:
• download user documentation and software updates
• nd answers to resolved problems in the FAQ database.
Search by product, category, or phrase
• report problems to Axis support staff by logging in to
your private support area
• chat with Axis support staff (selected countries only)
• visit Axis Support at www.axis.com/techsup/
Lear More!
Visit Axis learning center www.axis.com/academy/ for
useful trainings, webinars, tutorials and guides.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

AXIS Q60-S Series
Safety Information
Read through this Installation Guide carefully before installing the product. Keep the Installation
Guide for future reference.
Hazard Levels
DANGER Indicates ahazardous situation which, if not avoided, will result in
death or serious injury.
WARNING Indicates ahazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION Indicates ahazardous situation which, if not avoided, could result
in minor or moderate injury.
NONO
NOTICETICE TICE Indicates asituation which, if not avoided, could result in damage
to property.
Other Message Levels
Important Indicates signicant information which is essential for the product
to function correctly.
Note Indicates useful information which helps in getting the most out
of the product.
ENGLISH
5
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

AXIS Q60-S Series
Safety Instructions
WARNING
•The Axis product shall be installed by atrained professional.
NONO
NOTICETICE TICE
•The Axis product shall be used in compliance with local laws and regulations.
•Store the Axis product in adry and ventilated environment.
•Avoid exposing the Axis product to shocks or heavy pressure.
•Do not install the product on unstable brackets, surfaces or walls.
•Use only applicable tools when installing the Axis product. Excessive force could cause
damage to the product.
•Do not use chemicals, caustic agents, or aerosol cleaners.
•Use aclean cloth dampened with pure water for cleaning.
•Use only accessories that comply with technical specication of the product. These can be
provided by Axis or athird party.
•Use only spare parts provided by or recommended by Axis.
•Do not attempt to repair the product by yourself. Contact Axis support or your Axis
reseller for service matters.
Tra sportatio
NONO
NOTICETICE TICE
•Keep the protective packaging. When transporting the Axis product, the protective
packaging shall be replaced in its original position.
•When transporting the Axis product, use the original packaging or equivalent to prevent
damage to the product.
Battery
The Axis product uses a3.0 VBR/CR2032 lithium battery as the power supply for its internal
real-time clock (RTC). Under normal conditions this battery will last for aminimum of ve years.
Low battery power affects the operation of the RTC, causing it to reset at every power-up. When
the battery needs replacing, alog message will appear in the product’s server report. For more
information about the server report, see the product´s setup pages or contact Axis support.
The battery should not be replaced unless required, but if the battery does need replacing, contact
Axis support at www.axis.com/techsup for assistance.
6
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

WARNING
AXIS Q60-S Series
•Risk of explosion if the battery is incorrectly replaced.
•Replace only with an identical battery or abattery which is recommended by Axis.
•Dispose of used batteries according to local regulations or the battery manufacturer's
instructions.
Dome Cover
ENGLISH
NONO
NOTICETICE TICE
•Be careful not to scratch, damage or leave ngerprints on the dome cover because this
could decrease image quality. If possible, keep the protective plastic on the dome cover
until the installation is complete.
•Do not clean adome cover that looks clean to the eye and never polish the surface.
Excessive cleaning could damage the surface.
•For general cleaning of the dome cover it is recommended to use anon-abrasive,
solvent-free neutral soap or detergent mixed with pure water and asoft, clean cloth. Rinse
well with pure lukewarm water. Dry with asoft, clean cloth to prevent water spotting.
•Never use harsh detergents or alcohols (isopropyl, butyl, propyl) and avoid cleaning the
dome cover in direct sunlight or at elevated temperatures.
7
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

8
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

AXIS Q60-S Series
Installation Guide
This Installation Guide provides instructions for installing AXIS Q 042-S PTZ Dome Network
Camera, AXIS Q 044-S PTZ Dome Network Camera or AXIS Q 045-S Mk II PTZ Dome Network
Camera on your network. For other aspects of using the product, see the User Manual available
at www.axis.com
I stallatio Steps
1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 9.
2. Study the hardware overview. See page 11.
3. Study the specications. See page 18.
4. Install the hardware. See page 22.
5. Access the product. See page 31.
Package Co te ts
• AXIS Q 042-S PTZ Dome Network Camera, AXIS Q 044-S PTZ Dome Network Camera or
AXIS Q 045-S Mk II PTZ Dome Network Camera
• AXIS T8 05 Media Converter Switch
• Multi-connector cable (IP ), 7m(23 ft)
• DIN rail clip
• Installation and Management Software CD
• Printed materials
- Installation Guide (this document)
- Extra serial number label (2x)
- AVHS Authentication key
Recomme ded Tools
ENGLISH
NONO
NOTICETICE TICE
Stainless steel is corrosion-resistant, but extraneous rust can appear if the material is
handled incorrectly. Use stainless tools to avoid rust stains or pitting corrosion.
• Torx screwdriver T10 (lid, cable clamping Media Converter Switch)
• Torx screwdriver T20 (dome cover removal)
• Torx screwdriver T25 (dome replacement)
• Slotted screwdriver 2.5 mm (socket, Media Converter Switch)
9
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

AXIS Q60-S Series
• 7mm wrench (ground screw Media Converter Switch)
• 8mm (5/1 ”) wrench/socket (Sunshield, Pole Bracket T91C 7 (hose clamp))
• 10 mm (3/8”) wrench/socket (Bracket adapter AXIS T91C 1, AXIS T94S01D, Pole Bracket
T91C 7)
• Cable shoe pliers (ground cable Media Converter Switch)
• Diagonal pliers (cables)
• Wire stripping tool (cable connecting)
Optio al Accessories
• AXIS T91C 1 Wall Mount
• AXIS T94S01D Pendant Kit
• AXIS T91C 7 Pole Mount
• Sunshield
• Smoked dome cover
• AXIS T8008 PS12 Power Supply
• AXIS T8310 Video Surveillance Control Board
• AXIS T90B Illuminators
•Installation Display
For information about available accessories, see www.axis.com
10
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

AXIS Q60-S Series
Hardware Overview
21345678
910 11
ENGLISH
1Mounting hole for sunshield (3x)
2Pressure relief valve
3Multiconnector
4Hook for safety wire
5Guide hole
6Inlet valve
7Mounting hole (3x)
8Part number (P/N) &erial number ( /N)
9D card slot ( DHC)
10 tatus LED indicator
11 Control button
11
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

AXIS Q60-S Series
Dome Cover
1
3
4
2
5
6
1Dome bracket screw T25 (4x)
2Dome cover
3Rubber gasket
4Rubber gasket
5Dome ring
6Dome ring screw T20 (4x)
Su shield (Sold Separately)
1
1crew holes
12
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

AXIS Q60-S Series
Media Co verter Switch
1
2
3
4
5
6
7
8
10
9
11
12
13
ENGLISH
1Power connector (DC input)
2Power connector (DC output)
3Network connector (internal)
4Network slot FP (external) (2x)
5Network connector RJ45 (external) (2x)
6Camera LED indicator
7Network LED indicator (4x)
8Power LED indicator
9Ground clip
10 I/O connector (internal)
11 I/O connector (external)
12 Multi-connector cable
13 Ground screw
LED I dicators
Status ED Indication
Unlit Connection and normal operation.
13
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

AXIS Q60-S Series
Green Shows steady green for 10 seconds for normal operation after
startup completed.
Amber Steady during startup. Flashes during rmware upgrade.
Amber/Red Flashes amber/red if network connection is unavailable or lost.
Red Flashes red for rmware upgrade failure.
Media Co verter Switch LED I dicators
ED Color Indication
Power Unlit DC power unconnected or current protection engaged (power
overload)
Green DC power connected.
Network (4x) Amber 10 Mbit connection. Flashes during activity.
Green 100/1000 Mbit connection. Flashes during activity.
Camera Green 100 Mbit connection. Flashes during activity.
Co ectors a d Butto s
For specications and operating conditions, see page 18.
Network Co ector
NONO
NOTICETICE TICE
The product shall be connected using ashielded network cable (STP). All cables connecting
the product to the network shall be intended for their specic use. Make sure that the
network devices are installed in accordance with the manufacturer’s instructions. For
information about regulatory requirements, see Electromagnetic Compatibility (EMC) on
page 2.
Multi-co ector
Terminal connector for connecting the supplied media converter switch, which provides the
following signals:
•DC Power
•Network (Ethernet 10/100Base-T)
•Input/Output (I/O)
The supplied multi-connector cable is required in order to maintain the product’s NEMA/IP rating.
For more information, see Multi-Connector Cable on page 15.
14
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

AXIS Q60-S Series
SD Card Slot
Supports SD cards with up to 4 GB of storage. For best recording performance, use an SDHC
or SDXC card with speed class 10.
Co trol Butto
For location of the control button, see Hardware Overview on page 11.
The control button is used for:
• Resetting the product to factory default settings. See page 31.
• Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNS
Service. For more information about these services, see the User Manual.
Multi-Co ector Cable
Note
The supplied multi-connector cable is required in order to maintain the camera’s NEMA/IP
rating.
The multi-connector cable is connected to the camera’s multi-connector, see Hardware Overview
on page 11.
The wires are connected to the supplied media converter switch, see Media Converter witch
on page 13.
The cable provides the following signals:
• DC power to camera
• Network (Ethernet 10/100Base-T)
• Input/Output (I/O)
ENGLISH
15
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

AXIS Q60-S Series
1
2
3
4
5
6
7
8
9
10
12 11
1 8
2 7
9
3 6
4 5
Multi-connector cable overview
1Power wire (red)
2Digital I/O wire (blue)
3Ethernet wire (green/white)
4Ethernet wire (green)
5Ethernet wire (orange/white)
6Ethernet wire (orange)
7Digital I/O wire (yellow)
8Ground wire (black)
9Power wire (red)
10 Ethernet wire foil shield (2x)
11 Outer foil shield
12 Braided shield coil
Function Pin –wire Notes Specications
Congurable
(Input or
Output)
2–blue
7–yellow Digital input –Connect to pin
8to activate, or leave oating
(unconnected) to deactivate.
0to max 30 VDC
Digital output –Connected to
pin 1when activated, oating
(unconnected) when deactivated. If
used with an inductive load, e.g. a
relay, adiode must be connected in
parallel with the load, for protection
against voltage transients.
0to max 30 VDC,
open drain,
100 mA
RX+ 3–green/white Ethernet –receiving
16
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

AXIS Q60-S Series
RX- 4–green Ethernet –receiving
TX+ 5–orange/white Ethernet –transmitting
TX- –orange Ethernet –transmitting
0VDC (-) 8–black 0VDC
DC output
(12 V) 1, 9–red Used to power camera 12–13.2 VDC
ENGLISH
Media Co verter Switch Co ectors
For specications, see page 18.
NONO
NOTICETICE TICE
The product shall be connected using ashielded network cable (STP). All cables connecting
the product to the network shall be intended for their specic use. Make sure that the
network devices are installed in accordance with the manufacturer’s instructions. For
information about regulatory requirements, see Electromagnetic Compatibility (EMC) on
page 2.
Important
The media converter switch does not support hotswapping. Disconnect power from the
switch before swapping cameras. An attempt to hotswap could cause the switch to freeze,
in which case it must be restarted.
Power connector (DC input) -2-pin terminal block for power input.
Power connector (DC output) -Two 2-pin terminal block for power output (pin 4is not used).
Network connector RJ45 (external) -Two RJ45 connectors (10/100Base-T) for network
connectivity.
Network slot SFP (external) -Two SFP slots (100Base-FX/1000Base-X) for network connectivity.
Each RJ45 and SFP port has its own dip switch. The dip switches control how the port forwards
data. For more information, see the User Manual.
Dip switch position Description of use
Default (middle) BWhen connecting to the network, directly or through a
router or network switch.
17
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

AXIS Q60-S Series
Left AWhen connecting to acamera or adevice that is not
intended for viewing data.
Right CWhen connecting to another media converter switch.
Network connector (internal) -Two 2-pin Ethernet terminal blocks.
I/O connector (external) --pin congurable I/O terminal block, which is connected to the
camera through the multi-connector cable. Use with external devices in combination with, for
example, tampering alarms, motion detection, event triggering, time lapse recording and alarm
notications. In addition to the 0VDC reference point and power (DC output), the I/O connector
provides the interface to:
• Digital output –For connecting external devices such as relays and LEDs.
Connected devices can be activated by the VAPIX® Application Programming
Interface, output buttons on the Live View page or by an Action Rule. The output
will show as active (shown under System Options >Port &Devices >Port
Status)if the alarm device is activated.
• Digital input –An alarm input for connecting devices that can toggle between
an open and closed circuit, for example: PIRs, door/window contacts, glass
break detectors, etc. When asignal is received the state changes and the input
becomes active (shown under System Options >Port &Devices >Port Status).
I/O connector (internal) -2–pin I/O terminal block.
Specicatio s
Operati g Co ditio s
The Axis product is intended for outdoor use.
Product Classication Temperature Humidity
AXIS Q 042-S IEC 0721-4-3
Class 3K3
IEC/EN 0529 IP
ISO 20 53 IP K9K
-30 °C to 50 °C
(-22 °F to 122 °F) 10–100% RH (con-
densing)
AXIS Q 044-S
AXIS Q 045-S Mk II
Storage Co ditio s
The Axis product is intended for outdoor use.
18
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

AXIS Q60-S Series
Product Temperature
AXIS Q 042-S -40 °C to 0 °C
(-40 °F to 140 °F)
AXIS Q 044-S
AXIS Q 045-S Mk II
Electrical Specicatio
ENGLISH
NONO
NOTICETICE TICE
For conrmed compliance with the requirements for Safety Extra Low Voltage (SELV) and
Limited Power Source (LPS), use the power supply (sold separately) recommended by Axis.
For information about compatible power accessories, see www.axis.com
Product Function Description
AXIS Q 042-S
AXIS Q 044-S
AXIS Q 045-S Mk II
Input power 12 VDC, max 0 W
Media converter switch Input voltage 12.0–13.2 VDC
Input power 70 W(min)
Available output power 5 W(min)
Nominal output voltage 12.5 VDC
123
70 W
65 W
60 W
1Media converter switch
2Multi-connector cable
3Network camera
19
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]

AXIS Q60-S Series
Co ectors
SD Card Slot
Supports SD cards with up to 4 GB of storage. For best recording performance, use an SDHC
or SDXC card with speed class 10.
Media Co verter Switch Co ectors
Exter al Co ectors
Ground Screw Ground screw for connecting the media
converter switch to earth ground. Make
sure that both ends of the grounding
wire are in contact with their respective
Power connector grounding surfaces.
2-pin terminal block for power input.
-+
21
Function Pin Notes Specications
DC input 0VDC (-) 10VDC
12 VDC 2Power in from power
supply (sold separately) 12.0-13.2 VDC,
min 75 W
I/O terminal connector
-pin terminal blocks for:
•Digital Input/Output
•Power (DC output)
•0 V DC (-)
21 43 65
Function Pin Notes Specications
0VDC (-) 1, 4, 0VDC
DC output 2Power out 12 VDC, 50 mA
20
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]