Axis T8331-E User manual
Installation Guide
AXIS T8331-E PIR Motion Detector
© Axis Communications AB, 2015
Ver. 3.0
Date: October, 2015
Part No. 1529314
AXIS T8331-E PIR Motion Detector
Installation Guide
Legal Considerations
Video and audio surveillance can be regulated by laws that
vary from country to country. Check the laws in your local
region before using this product for surveillance purposes.
Liability
Every care has been taken in the preparation of this
document. Please inform your local Axis oce of any
inaccuracies or omissions. Axis Communications AB cannot
be held responsible for any technical or typographical errors
and reserves the right to make changes to the product and
manuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material
contained within this document, including, but not limited
to, the implied warranties of merchantability and tness for
a particular purpose. Axis Communications AB shall not
be liable nor responsible for incidental or consequential
damages in connection with the furnishing, performance
or use of this material. This product is only to be used for
its intended purpose.
Intellectual Property Rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more of
the patents listed at www.axis.com/patent.htm and one or
more additional patents or pending patent applications in
the US and other countries.
Equipment Modications
This equipment must be installed and used in
strict accordance with the instructions given in the
user documentation. This equipment contains no
user-serviceable components. Unauthorized equipment
changes or modications will invalidate all applicable
regulatory certications and approvals.
Trademark Acknowledgments
AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX
are registered trademarks or trademark applications of Axis
AB in various jurisdictions. All other company names and
products are trademarks or registered trademarks of their
respective companies.
Regulatory Information
Europe
This product complies with the applicable
CE marking directives and harmonized standards.
A copy of the original declaration of conformity may be
obtained from Axis Communications AB. See Contact
Information.
Electromagnetic Compatibility (EMC)
This equipment has been designed and tested to fulll
applicable standards for:
• Radio frequency emission when installed according to
the instructions and used in its intended environment.
• Immunity to electrical and electromagnetic phenomena
when installed according to the instructions and used
in its intended environment.
Europe
This digital equipment fullls the requirements for RF
emission according to the Class B limit of EN 55022.
This product fullls the requirements for immunity
according to EN 50130–4.
Australia/New Zealand
This digital equipment fullls the requirements for RF
emission according to the Cl ass B limit of AS/NZS CISPR 22.
Disposal and Recycling
When this product has reached the end of its useful life,
dispose of it according to local laws and regulations. For
information about your nearest designated collection point,
contact your local authority responsible for waste disposal.
In accordance with local legislation, penalties may be
applicable for incorrect disposal of this waste.
Europe
This symbol means that the product shall not be
disposed of together with household or commercial waste.
Directive 2012/19/EU on waste electrical and electronic
equipment (WEEE) is applicable in the European Union
member states. To prevent potential harm to human health
and the environment, the product must be disposed of in
an approved and environmentally safe recycling process.
For information about your nearest designated collection
point, contact your local authority responsible for waste
disposal. Businesses should contact the product supplier for
information about how to dispose of this product correctly.
This product complies with the requirements of
Directive 2011/65/EU on the restriction of the use of
certain hazardous substances in electrical and electronic
equipment (RoHS).
China
This product complies with the requirements of the
legislative act Administration on the Control of Pollution
Caused by Electronic Information Products (ACPEIP).
Contact Information
Axis Communications AB
Emdalavägen 14
223 69 Lund
Sweden
Tel: +46 46 272 18 00
Fax: +46 46 13 61 30
www.axis.com
Support
Should you require any technical assistance, please contact
your Axis reseller. If your questions cannot be answered
immediately, your reseller will forward your queries through
the appropriate channels to ensure a rapid response. If you
are connected to the Internet, you can:
• download user documentation
• nd answers to resolved problems in the FAQ database.
Search by product, category, or phrase
• report problems to Axis support sta by logging in to
your private support area
• chat with Axis support sta
• visit Axis Support at www.axis.com/techsup/
Learn More!
Visit Axis learning center www.axis.com/academy/ for
useful trainings, webinars, tutorials and guides.
Safety Information
Read through this Installation Guide carefully before installing the product.
Keep the Installation Guide for future reference.
Hazard Levels
DANGER
Indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Indicates a situation which, if not avoided, could
result in damage to property
Other Message Levels
NONO
NOTICETICE
TICE
Important
Indicates signicant information which is essential
for the product to function correctly.
Note
Indicates useful information which helps in
getting the most out of the product.
9
10
11
4
5
68
2
1
3
7
2.5 m
(8.3 ft) 1.2 - 1.5 m
(4 - 5 ft)
M4x10
¼-20 UNC
Si
Si
PULSE
COUNT
2
TEST
> 60 s
13
12
PULSE
COUNT
2
TEST
SENS.
L
M
H
2x
14
15 16
17
1
2
2.5 8.3 ft
5 ft
1
2
2.5 8.3 ft
5 ft
12 3 4
N. C. Alarm + Tamper
- + SP
12 VDC
e
f
f
dcbabcde
e
f
f
dcbabcde
MASKINGSTRIP
a
b
b
c
c
d
d
e
e
a
b
c
cd
e
f
AXIS T8331-E
User guide
AXIS T8331-E
User guide
Other manuals for T8331-E
1
Other Axis Security Sensor manuals
