B-Tech PV-RC100W User manual

1
PV-RC100W
HD WIFI Baery Case Camera for iPower 6/6S
User Manual
Regarding the Device
1) Power On/O Buon
2) REC/WIFI Buon
3) Memory Card Slot
4) Camera Lens
5) USB Charge Port
6) Charge LED (White color)
6~8) Power Level LED (White color)
8) WI-FI LED (Green Color)
9) Power & REC LED (Red color)
B. Charge
1) Connect the aached USB cable to the slot 5, connect to PC
in the other end
2) 1st one blue LED go ash under charge
C. Insert the SD Card
Open the lead on the back then place the SD Card into SD Card Slot properly; press the SD Card for taking out the SD Card.
*If the memory card can not be read successfully (the LED will alert the status) please re-plug the card again to check.

2
D. Buon Funcon
1) Power On/O:
Push & hold the buon 1 unl the device start to vibrate 3 short mes to power on the device; push & hold the buon 1
unl the device start to vibrate one long me then 2 short mes to power o the device successfully
2) Record On/O:
Push the buon 2 once to start or stop the recording
3) WIFI On/O:
Push & hold the buon 2 for 3 seconds to open or close the WIFI (In default, the WIFI always on aer power on)
4) Le Power Indicaon:
a. Under Power O: Push the buon 1 once to show the le.
b. Under Power on: Push the buon 1 once, the device will always show rst the working status then the power level sta-
tus aer it
5) Back to default: (Including the setup SSID and Password)
Push & hold the buon 2 for 10 second while under power on status
6) Charge:
The Buon 6 will keep ash while charging then keep light on once fully charged
E. LED Indicaon
1) Blue LED: Power on/o
2) Pink LED: WIFI status
a. LED stay o: WIFI o. b. LED stay ash: WIFI on & connected
c. LED stay on: WIFI on & stand by
3) Red LED: Recording status
a. LED stay o: Recording o. b. LED stay ash: Recording on
c. LED stay on: Memory empty alert/No detect memory card
4) First 3 LED from le: Power Level indicaon
Remark: All LED indicaon will auto go o aer every 15 seconds due to the condenal concern, simply push the buon 1
once to gain back all LED indicaon status
F. APP download QR Code (Scan the QR code below to download the APP or directly type & search
“SecurePro Plus” in App store or Google play for installaon)

3

4

5
II. APP UI descripon
1) Back to WI-FI which you need to connect device list.
2) Cell phone video and Photo archive folder.
3) SD card video host and Photo archive folder.
4) Seng.
5) Quick seng.
6) Host SD card resoluon when recording.
7) SD card reminder.
8) Moon detecon recording.
9) Resoluon when recording.
10) Host SD card recording icon.
11) Host SD card recording.
12) Host SD card photograph.
13) Smartphone recording icon.
14) Smartphone recording.
15) Smartphone photograph.
16) Host SD card recording buon.
17) Smartphone recording buon
1) Host SD card red light constant lighng while recording
2) Smartphone recording red light blinking.

6
Browsing Mobile Video and Photo Archive Informaon.
1) Film archives.
2) Photographic archives.
3) Film and photo all archive.
4) Mark archive what you need.
5) File name.
6) Mark all archive.
7) Unmark all archive.
8) Back to homepage.
9) Play buon.
10) Delete buon.
Play The Video File.
1) Video playback window.
2) Back to last page.
3) Pause buon.

7
Browsing the Host SD Card Video and Photo Archive Informaon.
1) Film archives.
2) Photographic archives.
3) Film and photo all archive.
4) Connuous video le named beginning with Rec.
5) Moon detecon recording named beginning with MRec.
6) Mark archive what you need.
7) File name.
8) Mark all archive.
9) Unmark all archive.
10) Back to homepage.
11) Download archive of SD card to smartphone.
12) Play buon.
13) Delete buon.
Seng
1) WI-FI seng.
2) Privacy seng.
(Aer switch privacy seng, entry APP need password.)
3) Video seng.
4) Date and me seng.
5) System informaon.
6) Reset all seng.
7) Firmware upgrade.
8) Back to homepage.

8
WI-FI Seng
1) WI-FI host name.
2) WI-FI password
*You may change the default password to your preferred
here to keep the WIFI connecon more condenal
3) Way of encrypon.
4) WI-FI SSID invisible or not.
5) Host WI-FI o.
6) Back to homepage.
7) Back to last page.
1) Encrypon Column Opon.
2) No encrypon
3) WEP encrypt (64bit)
4) WPA/WPA2/PSK encrypt (128bit)—Default
*Not suggest to change

9
1) WIFI column opon
2) Once power on, WI-FI is always on
3) WIFI turn o aer 1 minute (If no connecon detect)
4) WIFI turn o aer 3 minute (If no connecon detect)
5) WIFI turn o aer 5 minute (If no connecon detect)
*Once WIFI turn o it has to be switched on from the device,
can’t be re-opened by the phone remotely
1) Privacy On/O
White doc on the le ：Privacy o
White doc on the right ：Privacy on
2) Privacy password. (Number Only)
3) Conrm password again.
4) Back to homepage.
5) Back to last page
*Be aware the privacy funcon only lock on the running of
this APP, all other funcons in the phone remain normally.

10
Image Seng
1) Play parameters.
2) Resoluon. (D1、720P)
3) Frame choice. (10、15、20、25)
Image Seng
1) Recording mode.
Connuous recording / Moon detecng recording
*When execute the moon record, aer seng it up in
The menu, it need to be pushed once for the either
record buon on the preview page to start to operate.
2) Recording me. (1、3、5、10 min)
3) SD Over-Write on/o ：
White dot on the le ：Overwrite Seng o.
White dot on the right ：Overwrite Seng on.
4) Back to homepage.
5) Back to last page.