BABY DELIGHT Horizon BD06210 User manual

1
Mesh walls
for visibility
and air flow
Accepts full size
crib mattress
(NOT INCLUDED)
Quilted crib cover
Care & Instructions
©2021 Baby Delight, Inc.®1-401-333-6800 www.babydelight.com
BD06210, BD06190 , BD06240 | MADE IN CHINA
Storage
Bag
Crib Frame
with Cover
Mattress
Support
A Rails
(left and right)
B Rails
(left and right)
C Rails
(left and right)
D Rails
(left and right)
E Rails
(left and right)
Contents
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
Scan Code for
more product
information
Full Size Mesh Crib
Horizon

2
• Read all instructions before assembling crib.
• Keep instructions for future use.
• Never use plastic shipping bags or other plastic lm as mattress
covers because they can cause suocation.
• Infants can suocate in gaps between crib sides and a mattress that
is too small.
• CAUTION: Any mattress used in this crib shall be at least 27 1⁄4 in.
(69 cm) by 51 5⁄8 in. (131cm) with a thickness not exceeding
6 in. (15 cm).
• The safest place for your baby to sleep is in a JPMA Certied crib.
• Pillows and Blankets have caused infants to suocate, NEVER use
in a crib.
• Read all warnings and follow all instructions.
• Missing or broken parts, any questions? CALL Baby Delight, Inc.
• NEVER place the crib near a window or any wall hangings.
• Your baby should sleep on a rm mattress.
• DO NOT place any items in the crib.
• Infants can suocate on soft bedding. Never add a pillow or
comforter. Never place additional padding under an infant.
• Failure to follow these warnings and the assembly instructions could
result in serious injury or death. DO NOT use this crib if you cannot
exactly follow the accompanying instructions.
• To reduce the risk of SIDS, pediatricians recommend healthy infants
be placed on their backs to sleep, unless otherwise advised by your
physician.
• The crib, including side rails, must be fully erected and locked prior to
use. : Make sure latches are secure/locked in place.
• Check this product for damaged hardware, loose joints, loose bolts
or other fasteners, missing parts, or sharp edges before and after
assembly and frequently during use. Do not use crib if any parts
are missing, damaged or broke. Contact Baby Delight, Inc. for
replacement parts and instructional literature if needed. Do not
substitute parts.
• Never add an accessory such as a bassinet or changing table that
extends over the sleeping area.
WARNING:
• When child is able to pull to a standing position, remove bumper
pads, large toys and other objects that could serve as steps for
climbing out.
• Stop using crib when child begins to climb out or reaches a height of
35in. (89cm), whichever occurs rst. The child should be placed in a
youth or regular bed.
FALL HAZARD

3
Assembly/Operating Instructions
21
Remove Rails from the MATTRESS
SUPPORT STORAGE POCKETS and
unfasten MATTRESS SUPPORT around
CRIB FRAME and COVER.
Connect the left and right A RAILS
until you hear a “click”. Repeat for C,
D and E rails.
Safe Sleep Guidelines from the US Consumer Product Safety
Commission:
• Back to Sleep:Always place the baby to sleep on the baby’s back to
reduce the risk of sudden unexpected infant death syndrome (SUID/
SIDS) and suocation;
• Bare is Best:Always keep the baby’s sleep space bare (tted sheet
only) to prevent suocation. Do not use pillows, padded crib
bumpers, quilts or comforters; and
• Only place the baby to sleep in a product that is intended for sleep.
Transfer the baby to a crib, bassinet, play yard or bedside sleeper if
the baby falls asleep in a swing, bouncer, lounger or similar product.
Safe Sleep Guidelines from the US Consumer Product Safety
Commission:
•STRINGS CAN CAUSE STRANGULATION! DO NOT place items with
a string around a child’s neck, such as hood strings or pacier cords.
DO NOT suspend strings over a crib or attach strings
to toys.
• DO NOT place crib near window or patio door where cords from
blinds or drapes may strangle a child.
STRANGULATION HAZARD:

4
3
5 6
4
Unfold the CRIB FRAME, but DO NOT
PRESS DOWN ON THE CRIB FLOOR
CENTER. CRIB FLOOR CENTER
should be at least as half as high as
the FRAME RAILS.
Press down on the center of CRIB
FLOOR until it is level.
Pull up on each of the TOP FRAME
RAILS until they are securely locked in
place.
Unfasten the front bottom corners of
the CRIB COVER, lift COVER up and
insert the RAIL A assembly into the
left and right SLOTS until you hear a
“click” sound.
Care & CleaningAssembly/Operating Continued:
CLICK!

5
7 8
REPEAT on both sides with RAIL C
(left and right) and on rear bottom
with RAIL B ASSEMBLY.
Insert the RAIL D ASSEMBLY into the
left and right SLOTS on the top rear
corners of the CRIB.
9
Pull CRIB HEADBOARD COVER over RAIL D assembly and zipper left and right
sides of the HEADBOARD.
Care & CleaningAssembly/Operating Continued:
CLICK!

6
10
12 13
11
Zipper bottom of
CRIB HEADBOARD COVER.
Insert the RAIL E ASSEMBLY into the
left and right SLOTS on the top front
corners of the CRIB until you hear
a “click”.
Fasten CRIB COVER HEADBOARD
COVER with hook and loops on the
left and right side.
Pull CRIB COVER over RAIL E
assembly and zipper under RAIL E
ASSEMBLY.
Care & CleaningAssembly/Operating Continued:
CLICK!

7
14 15
Fasten all four bottom corners of CRIB
COVER with hook and loops
until tight.
Place MATTRESS SUPPORT inside
the crib with INSTRUCTION POCKET
facing up.
16
Store this INTRUCTION BOOKLET
in this pocket for future reference
and place MATTRESS (not included,
see the following warning) over
MATTRESS SUPPORT.
Care & CleaningAssembly/Operating Continued:

8
Care & CleaningFolding the Crib for Storage:
1
3
2
4
Remove the MATTRESS from
the CRIB.
Unzip CRIB COVER under FRONT
TOP RAIL.
Remove the MATTRESS SUPPORT
from the CRIB.
Lift up CRIB COVER and remove RAIL
E ASSEMBLY by pressing BUTTONS
on each side and lifting UP.

9
5
6 7
Un-fasten CRIB COVER at all four corners and remove both C RAIL ASSEMBLIES
on left and right sides of the CRIB and B RAIL ASSEMBLY on the rear bottom of
CRIB by pressing BUTTONS on each side and lifting up.
Unzip bottom of CRIB
HEADBOARD COVER.
Un-fasten CRIB HEADBOARD COVER
on the left and right side and lift up
CRIB HEADBOARD COVER.
Care & Cleaning
Folding the Crib for Storage (Continued):

10
8
10
9
Remove D RAIL ASSEMBLY on each
side by pressing BUTTONS on right
and left side and lifting up.
Lift up CENTER STRAP on the CRIB
FLOOR.
With the CENTER of the CRIB FLOOR raised, squeeze the CENTER BUTTONS
on the underside of each of the FRONT, SIDES AND BACK RAILS and push down
one at a time on each RAIL. DO NOT FORCE THE RAILS DOWN IF THEY DO NOT
UNLATCH. If this happens, lift the CENTER of the CRIB FLOOR higher and v
repeat above for each TOP RAIL .
Care & Cleaning
Folding the Crib for Storage (Continued):