Babybee Orbit User manual

babybee Orbit
ride on buggyboard

Hello!
Thank you for choosing the babybee Orbit ride on buggyboard
Before you get started, there’s a few quick things we’d like you to
note:
Support
If at any stage you require any assistance with setup or use, please
email us for assistance at [email protected]
Warranty
Rest assured that your buggyboard comes with an 12 month
warranty to cover against faults in materials and workmanship when
your products are used under normal conditions according to our
manual and technical specifications.
Keep in touch
We love nothing more than seeing our customers with the Orbit in
action, so we hope you connect with us soon via one of our social
media channels!!
Enjoy the ride!
The babybee team.
1

1. To prevent injury or death from choking or suffocation, remove all
packaging and immediately move out of reach. Never leave your
child unattended with the buggyboard parts or packaging.
2. Keep your children away from the buggy board whilst you are
attaching it to your pram or attaching/dismantling the seat.
3. Always apply the pram brake before installing the buggyboard,
loading or unloading your child.
4. The buggyboard is designed for children’s use only. Only one child
at a time.
5. Do not leave your child on the buggyboard alone.
6. Do not allow your child to sit on the board (sit on the seat only).
7. Do not allow your child to jump on the buggyboard.
8. The buggyboard is not a toy and should not be played with by
children.
9. Do not load other items onto the buggyboard such as bags or
unauthorised accessories not approved by babybee prams.
10. Do not use parts unapproved by babybee prams.
11. Take your child off the buggyboard when using public transport.
12. Do not use if any part of the buggyboard is broken or damaged.
SAFETY WARNINGS!
This product is suitable for children 2 years and over. Every child is
different, it is the parents responsibility to assess whether your child is
safe and secure either sitting or standing before walking with the
buggyboard in use.
SAFETY FIRST
MUST READ BEFORE INSTALLATION AND USE
The safety of your family is our number one priority. Please read this
manual fully before installation and use and keep in a safe place for
future reference. If you require further assistance please email us at
[email protected]
The babybee Orbit board is compatible with the babybee Comet,
babybee Comet plus and babybee Comet Duo only.
2

13. Do not allow your child to sleep while sitting on the seat.
14. When seated, ensure your child’s feet are clear of the ground,
wheels and brake.
15. Always hold your stroller while buggyboard is in use to avoid
instability.
16. Ask your child to get off when moving on steep or unstable
conditions, up or down curbs or other uneven surfaces.
17. Do not allow your child to play with the pram brake or wrist tether
strap.
SAFETY FIRST
MUST READ BEFORE INSTALLATION AND USE
3

Parts
Please ensure all parts are present in the box you recieve
Seat Board
Wheels
12
3
4

Step 1: Wheel installation / removal
Insert the wheel axle into the wheel hub located on the
underside of the board until you hear a audiable “click”.
Pull on the wheel to ensure it is attached
correctly. Attach other wheel
To remove the wheels, press the button located on the underside of the
board, on the wheel hub, and pull wheel out.
5

Step 2: Seat Installation / removal
Insert the seat tube into the seat hub, located on the topside of the
board, until you hear an audible “click” pull on the seat to ensure it is
firmly connected.
To remove the seat, press the button located on the underside of the
seat hub and pull the seat up.
You may choose not to use the seat, if your child prefers they can
remain standing on the board instead.
6

Step 3: Connecting the buggyboard to your pram
7
Engage the brake.
Loosen the bolt on the underside of the board, counter clockwise until it’s
released and open.
Remove the foam from inside the clamp and attach it to the middle of
the thin axel bar (not the movable brake bar).
Entering from the side of the axel (to allow the bolt to easily pass
between the pram frame and axel bar) attach the clamp over the foam,
lock the bolt back into place, and then tighten.
To remove the buggyboard from your pram, unscrew the bolt by
turning it counterclockwise until it comes out and the mechanism opens.

Step 4: Adjusting the seat height
To adjust the height of the seat, hold down the button located
underneath the seat, until it rotates forward.
Once the seat has been rotated forward, the seat tube can be
positioned to the correct height of your child by sliding up and down.
Once you find the correct height, rotate the seat back to a horizontal
position.
note: your child’s feet should sit flat on the board with knees slightly
bent when using the seat attachment.
Step 5: Balancing your buggyboard
Ensuring your buggyboard is correctly balanced is very important. Once
the buggyboard is attached to your pram, you are able to move the
position of the board to one of the 3 levels indicated, so the foot brake
is able to engage correctly.
To adjust the position of your board, loosen the knobs located where
the clasping mechanism and the board join, you will need to losen both
knobs located on either side. You will now be able to move the board
to the ideal loaction for your pram.
Once the board is in the correct position, rotate both knobs toward the
lock position until tight.
8

- Your buggyboard has many moveable parts, therefore friction will
occur and over time it may become scratched, rusty or dusty.
We strongly suggest giving it a wipe from time to time, this will help your
buggyboard last longer and keep it operating at its best.
- Please be aware that weather conditions such as humidity, snow,
and beach use will also affect the product's exterior
- To clean your buggyboard, use warm water with a gentle cleaning
detergent and dab clean. Always dry after cleaning or allow to air dry
completely.
Maintenance Guide
9

Version Feburary 2017
[email protected]