Babyhug NUBF0014 User manual

STYLE CODE : NUBF0014
Kelly Baby Cot
Happy Dino
baby furniture
Bassinet + Cot Storage Mosquito Net New Zealand Pine wood
0
Months +
Carrying Capacity
up to 35 kg

2
User Instruction Manual
Make sure that the side rails are closed and locked, when the baby
is in the cot
This product can be used for a child of upto 6 years of age and a maximum
weight of 35 kgs
Adjust the bed board height as per the height/devlopmental phase of the child
Do not keep the cot close to a re or any re source
If the bed board gets wet, please dry it under the fan - do not dry it in the sun
Suggested size for mattress is 111 x 63 cm, thickness should not exceed 10 cm
Please follow all instructions carefully. Ensure that all parts are tted correctly
before using the cot
Don’t use the packing material as a toy
The product outline in this manual is for assembly and operation purposes. On
occasion the physical product might differ from the product outline shown on
account of constant improvements being made to the product for enhanced
customer experience
Maintenance
Before using the cot, please ensure that all parts have been securely tted as
explained in the manual.
When dismantling the cot, please follow instructions carefully to avoid
unnecessary damage to the cot.

Components
3
Product size :
1140 mm x 682 mm x 872 mm
1620 mm x 682 mm x 872 mm (with open storage board)
Bassinet
Protective teething rail
Back guard rail
Headboard
Bedboard
Storage Door
Caster Wheel
Front guard rail
Base Board
Extension board
Storage board

4
123 4
Parts List
No. Part Name Used For Qty
1 Extension board Used as the head of the crib and to extend the cot 1
2 Headboard Used as the head of the cot 1
3 Back guard rail Connects the headboard with the extension boards 1
4 Front guard rail Connects the headboard with the extension 1
board, part of which can be rolled over to
open and close
5 M6x40 turning To x and loosen the extension board 1
6 M6x28 turning Assemble the mosquito net 2
7 M6x35 head screw To assemble the extended bracket, back and 10
8 M6x40 head screw To x the headboard, extension board and 9
front and back guard rail
9 Bedboard and For the baby to sleep and for storage purposes 1
Base board
10 Plastic casing To support the bedboard and base board 8
11 Caster wheels To move the cot 2
12 Mosquito net holder To hold the mosquito net 1
13 Ring and Mosquito net To hold the mosquito net 1
14 Bassinet For baby under six months of age 1
15 Instruction manual Instructions for assembly and usage 1

5
Parts List
5 6 78
9 10 11
12 13 14
Tool required
Screw driver

6
Assembly Instructions
Assemble guard rail
9x
1x
1
1x 1x 1x
The protective teething rail is on top.
The side with the hole to x the mosquito
net faces the outside
The protective teething rail is on top, the side with "Babyhug” faces the outside.
2
5
4
3
Prepare the following parts
2x
4x
1x
3x

7
6 7
9
8
11
10
1x 1x
Base board
Bed board
Prepare the following parts
Assemble the bed board and the board
1x 8x 10x
The base board is tted at the
bottom
Rest the bedboard on the plastic
casing
Turn the connector outside to the
horizontal position
connector
b
a
Assembly Instructions

8
12 13
15
14
17
16
connector
ab
c
For xing the rail in upright position
turn the connector downward
Connector
C
1x
1x
Connector
a
Turn the connector downward
to the upright position.
Close the extended board
Prepare the following parts
Assembly Instructions

9
18 19
21
20
23
22
Pull back the knobs on both sides
of the storage board to fold it
Prepare the following parts
Assemble caster wheel
2x
Press the cylinder of the caster
into the plastic receiving cylinder
of the crib leg to install the caster
wheel
a
Fold storage board
Assembly Instructions

24 25
27
26
29
28 Put bassinet hooks on guard rail
Bassinet assembly nished
Cot assembly
nished
10
Assembly Bassinet
Prepare the following parts
1x
Assembly Instructions
Prepare the following parts
Assemble of the mosquito net
1x
1x
1x