Babyhug Visby NUBF021 User manual

baby furniture
0 to 30
Months
Carrying Capacity
up to 20 kg
Babyhug Visby Cot Bed
Style Code : NUBF021
Please read the instructions carefully before use and keep this manual for future reference.
Sturdy Frame 3 Levels of Base Height Adjustment Child-Friendly Paint

Assembly Instructions
Contents:
1a Head Board : 1
1b Foot Board : 1
2 Side Rail : 2
3 Base : 1
M6*60 mm Bolts : 12
Barrel Nuts : 12
Plastic Washer : 12
Allen Key : 1
A - Bolts B - Barrel Nut C - Plastic Washer D - Allen Key
1a
1b
2
3
2
X12 X12 X12 X1
M6X60

• As shown in gure 1, position the base at the
preferred height; lower; middle or upper and
insert the bolts part way to stop it from moving
• Insert two barrel nuts into the holes in one
corner of the base and align the slots with the
bolts (M6*60 mm)
• Once aligned, screw the bolts and plastic
washer into the barrel nuts, but do not fully
tighten at this stage. Repeat the same process
for the other corners
• As shown in gure 2, attach the
side rail of the cot and use bolts
(M6*60 mm), plastic washer and
one barrel nut at each corner to
t them into place. Fully tighten
all the bolts to keep all parts in
place
1a
1b
2
2
Figure 1
Figure 2

Made in PRC
Imported & Marketed By
Brainbees Solutions Pvt. Ltd.
Corporate & Registered Office Address:
Rajashree Business Park, Plot No: 114,
Survey No. 338, Tadiwala Road,
Near Sohrab Hall, Pune 411 001
Customer Care :
020-30556310
customercar[email protected]
Warning:
• Of the 3 base heights, the highest one should be used till the baby learns to sit up. The lowest level is the
safest option for babies as soon as they are old enough to sit up by themselves
• Do not leave anything in the cot that could present a danger of suffocation or strangulation
• Place the cot away from objects that could provide a foothold for the child to climb on
• Do not use more than one mattress in the cot
• Do not place your cot in the vicinity of an open re and other sources of heat, such as electric radiators or gas
re
• The mattress should not be thicker than 10 cm
• While at the lowest base position ensure that the surface of the mattress and the upper edge of the cot frame
are at least 50 cm apart
• While at the highest base position ensure that the surface of the mattress and the upper edge of the cot
frame are at least 20 cm apart
• The cot bed is suitable for a mattress of 120 cm in length and 60 cm in width
• The mattress should t snuggly into the cot. There should not be more than 3 cm gap between the mattress
and the cot
• When the child is able to climb out of the cot, the cot should no longer be used for that child
Maintenance:
• Regularly check that all ttings and components of the cot are fully tightened and in working order
• Check for damage which could render your cot unsafe
• To clean use a soft cloth, avoiding the use of strong detergents or abrasives