BaByliss Dry & Curl 5548U User manual

5548U
DRY & CURL

BaByliss Dry & Curl
The BaByliss Dry & Curl has 2100W of power for fast
drying. It has 3 heat / 2 speed settings and comes
with a concentrator nozzle and diffuser, so it’s ideal for
creating straight or curly styles.
FEATURES
• 2100W
• 3 heat / 2 speed settings
• Cool shot button
• Concentrator nozzle
• Diffuser
• Hanging loop
• Ionic conditioning for a frizz-free high shine nish
Ionic Technology
Many aspects of modern living, including air conditioning,
contact with man-made bres and air pollution contribute to
a build-up of static electricity in the hair. Even brushing and
towel drying the hair, can increase these levels causing the
surface of the cuticle to become rough.
Consequently, hair may have a dull appearance. Also high
levels of static charge cause hair to become “y-away” and
difcult to style. The ion generator produces a stream of
negative ions which act to neutralise the static charge,
smoothing the scales on the cuticle for shiny, smooth and
manageable hair so you can achieve your desired style easily.

INSTRUCTIONS FOR USE
General
• Towel dry and detangle the hair.
• There are 3 heat / 2 speed settings. Use a high heat/speed
setting for rough drying. Use the low heat/speed setting as
hair begins to dry and for styling and scrunch drying.
• Use the cool shot button on warm hair to “set” a curl or
wave.
• After use, switch off and unplug the appliance. Allow to cool
before storing away.
How to use the concentrator nozzle
The concentrator nozzle is great for straightening or styling
hair with a brush. Use the professional concentrator nozzle for
directing the air just where you want it. For additional control
use one of the lower settings and point the air-ow along the
surface of the hair to be dried.
How to use the diffuser
Diffuser drying gives you more control over your hair. It is kinder
and more gentle to your hair than conventional blow drying. It
gives diffused heat which is perfect for enhancing natural curls.
Tilt your head forward and aim the diffuser upwards so
that the warm air circulates freely through your hair. Use your
ngers to lift the hair up from the roots. When dry, arrange
your hair as required for a casual, tousled look.
IMPORTANT
Only use the diffuser with your dryer on the lowest heat / speed
setting.

Cool shot button
Use the cool shot button on warm hair to set the wave or curl
in place for a really long lasting effect.
STYLING TIPS
Body & volume
To help create extra body and volume in the hair, tilt your head
forward so the hair is upside down when drying. Position the
airow towards the roots for maximum lift. When hair is dry
brush in to desired style.
Straightening
To create a super straight look, rst divide the hair into sections
then using a brush and the concentrator nozzle, hold hair taut
and let the brush glide down the hair as you dry.
CARE OF YOUR DRYER
To keep your hairdryer in the best possible condition please
follow the steps below:
• Do not wrap the lead around the hairdryer, instead coil
loosely by the side of the dryer.
• Always unplug after use.
• Do not use the hairdryer at a stretch from the power point.
• Make sure the hairdryer is used on the correct voltage.
Cleaning the filter
• Ensure the appliance is switched off, unplugged and cool.
• Holding the handle of the dryer using the raised thumb grips
push the rear lter away from the dryer.

• Using a soft brush, clean any hair and other debris from the
lter.
• Replace the rear lter by pushing back into position.
IMPORTANT!
• This appliance should only be used as described within this
instruction booklet. Please retain for reference.
SAFETY CAUTIONS
WARNING: Polythene bags over product or package may be
dangerous. To avoid danger of suffocation, keep this wrapper
away from babies and children. This bag is not a toy.
• If using this appliance in a bathroom, unplug after use, as the
proximity of water can be dangerous even if the appliance
is switched off. (UK only: this appliance must not be used in
the bathroom). For additional protection, the installation of a
residual current device (RCD) with a rated residual operating
current not exceeding 30mA is advisable in the electrical
circuit supplying the bathroom. Ask your installer for advice.
• WARNING! Do not use this appliance near water contained
in basins, bathtubs or other vessels.
• Do not immerse the appliance in water or other liquids.
• Always inspect the appliance before use for noticeable
signs of damage. Do not use if damaged, or if the appliance
has been dropped. In the event of damage, discontinue use
immediately and contact the Conair Customer Care Line
(refer to ‘UK After Sales Service’ section).
• Do not use the appliance if the lead is damaged. In the event
of damage, discontinue use immediately and contact the
Conair Customer Care Line (refer to ‘UK After Sales Service’
section).

• Do not leave the appliance unattended when switched on or
plugged in.
• This appliance is equipped with a safety thermostat. In the
event of overheating, the appliance will stop automatically.
Should this happen, push the switch on the handle to the
OFF position, unplug and allow to cool for 10 minutes.
Before use, ensure that the rear lter is clear of hair and other
debris. Plug in and switch on. If the appliance continues
to overheat, discontinue use immediately and contact the
Conair Customer Care Line (refer to ‘UK After Sales Service’
section).
• Take care that the air vents do not become blocked when
in use. Ensure the rear lter is clear of hair and other debris
before use.
• Do not place the appliance on any surface whilst in operation.
• Take care to avoid the hot surfaces of the appliance coming
into direct contact with the skin, in particular the ears, eyes,
face and neck.
• Children should always be supervised to ensure that they do
not play with this product.
• This appliance should not be used by adults or children whose
lack of experience, product knowledge or disability might
cause a hazard, unless they have been correctly instructed
and are adequately supervised.
• Allow appliance to cool before storing away.
• After use, do not coil the lead around the appliance as this
may cause damage to the lead. Instead, coil the lead loosely
by the side of the appliance.
• This appliance complies with the requirements of Directives
04/108/CEE (Electromagnetic Compatibility) and 2006/95/
CE (Electrical Safety of Domestic Appliances).

UK GUARANTEE
This 3 year guarantee will cover defects found due to faulty
workmanship or material. Proof of purchase is required to
validate the guarantee. The guarantee will be void if the
damage has been caused by a fall, alteration or repair by any
unauthorised persons. In the event of a faulty appliance,
discontinue use immediately. No repair must be attempted by
the consumer.
UK AFTER SALES SERVICE
For further advice on using the appliance and other products
contact the Conair Customer Care Line on 0870 5 133191 (09:00
to 17:00 Monday to Friday) or alternatively email your enquiry to
[e-mail].
In Guarantee
Return the product to the Conair Service Centre at the following
address:
Conair Service Centre
PO Box 506
WIGAN
WN1 9AA
Enclose your name and address, together with proof of
purchase and details of the fault. Conair will either repair or
replace the product as appropriate.
Out of Guarantee
ContacttheConairCustomerCareLineon08705133191(09:00
to 17:00 Monday to Friday) or alternatively email your enquiry to

[e-mail] for details of the standard repair or
replacement charge. If you wish to proceed with the repair or
replacement, return the product to the Conair Service Centre
at the following address:
Conair Service Centre
PO Box 506
WIGAN
WN1 9AA
Enclose your name and address together with details of the
fault and cheque made payable to The Conair Group Ltd.
UK WIRING INSTRUCTIONS
The wires in the mains lead are coloured in accordance with
the following code:
BLUE = NEUTRAL
BROWN = LIVE
As the colours of the wire in the mains lead of this appliance
may not correspond with the colour marking identifying the
terminals on your plug, proceed as follows:
• The wire which is coloured BLUE must be connected to
the terminal which is marked with the letter N or coloured
black.
• The wire which is coloured BROWN must be connected to
the terminal which is marked with the letter L or coloured
red.
• Neither core should be connected to the earth terminal of a
three pin plug marked with the letter E or or is coloured
green or yellow.

With the appliance, if a 13 amp plug is used a 13 amp fuse
should be tted. If any other type of plug is used a 10 amp fuse
must be tted either in the plug or at the distribution board.