Backyard Creations 273-0100 User manual

Made in China
Adirondack Chair
SKU # 273-0100
Questions or Missing Parts Please call
[phone] between 8:30 am to 5:00 pm EST
Or email: [e-mail]

2
Table of Contents
Safety Information
DANGE R : Please keep children out of the assembly area
W ARN IN G : Do notstand on the chairs. Do not sit on the
C AU T IO N : Use the chairs on at ground only.
Warranty
armrests.
Table of Contents ....................................................... 2
Safety Information ...................................................... 2
Warranty ...................................................................... 2
1 Year Frame Limited Warranty
Pre-Assembly ............................................................3
Planning Assembly ................................................................3
Tools Required ..................................................................... 3
Hardware Included .............................................................. 3
Package Contents ................................................................ 4
Assembly ....................................................................5
................................................................ 2
What Is Covered
What Is Not Covered .............................................................. 2
.. ..
................................................................ 2
Care Instructions
ONE YEAR LIMITED WARRANTY
WHAT IS COVERED
Adirondack Chairs are warranted to the original purchase to be free from defects in material or workmanship for a period of one year
from the date of original retail purchase. The word “defects” is dened as imperfection that impairs the use of the product. Defects
resulting from misuse, abuse or customer negligence will void this warranty.
The adirondack chair should be stationed on a level surface and kept away from extreme heat and strong oxidizing agents. Never
use petroleum or oil based products such as solvents or harsh cleaners to clean the material.
To clean material, wipe surface with a damp cloth or simply spraying with a garden hose should be adequate. If needed mild soap or
dish detergent can be used to help remove caked-on dirt.
You may contact our customer service department with any questions by phone at [phone] or email us at
[email protected]
Care Instructions
....
WHAT IS NOT COVERED
This Warranty does not cover commercial use, hardware, act of nature, re, freezing and abusive use. This warranty does not cover
defects due to alteration of accident. This warranty does not cover scratching, scung or other cosmetic damage that may result
from normal use of the product. If the product is defective within the term of this warranty, Merry Products, Inc. will repair or replace
defective parts at no cost to the purchaser. Shipping charges are not covered and are the responsibility of the purchaser.
............................................ 2
.....
..
during assembly.

3
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA Screw (3.5x35) 16
Pre - Assembly
Phillips screwdriver
TOOLS REQUIRED (not included)
Screw (3.5x30)
Bolt (M6x50)
BB
CC
4
4
BB CC
AA

4
Pre - Assembly (continued)
PACKAGE CONTENTS
Part Description Quantity
A 1
B
Seat
2
C 2
D 1
Armrests
Front Legs
A
B
C
D
Front Stretcher
F
Part Description Quantity
F 1
Backrest Support
E 1
Backrest
E
*Note: DO NOT TIGHTEN ANY BOLTS
BEFORE THE UNIT IS PUT TOGETHER.
R
L
L
R

5
Asse mbly
1 Attaching the front legs 2 Attaching the backrest support
□Attach the backrest support (F) onto the backrest (E) with
screws (AA).
□Attach the front legs (B) to the seat (A) with bolts
(CC), using a Phillips screwdriver.
3 Attaching the seat, armrests and
backrest
□ Attach the seat (A) to the backrest (E) with
screws (AA), using the Phillips screwdriver. Attach the
armrests (C) to the backrest support with screws (BB),
using the Phillips screwdriver.
4 Attaching the front stretcher
□Attach the armrests (C) to the front legs (B) with screws (AA).
Attach the front stretcher (D) to the front Legs with screws (AA).
Note: DO NOT TIGHTEN ANY BOLTS
BEFORE THE UNIT IS PUT TOGETHER.
B
L
R
AA
E
A
BF
C
AA
AA
BB
BB
AA
AA
D
AA
E
C
B
B
A