Backyard Creations UMB-952371 Installation guide

10x13ft Rectangle Offset
Umbrella with Resin Base
Assembly & Care Instructions
IMPORTANT : RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
SKU #: 272-1774
Model #: UMB-952371
ATLeisure, LLC
Toll Free: 1-855-880-7205 (English is offered)
8am - 5pm, Monday through Friday, Eastern Standard Time
Email: customerser[email protected] or visit our website at www.atleisure.com
DO NOT RETURN TO STORE
2020 Distributed by Menard, Inc., Eau Claire, WI 54703
Made in China
The schematics in this manual are for assembly and operation illustration only.
They may differ from the actual appearance.
For assistance with assembly, parts, or customer service, please contact:

2
E
Contents
Preparation . . . . ........... . . . . . . . . . . .... . . . . 2
Hardware Contents . . . . . . . .... . . . . . ....... . . . . 2
Package Contents . .......... . . . ........... . . . 3
Umbrella Assembly . . ........ . . . . .......... . .4-6
Umbrella Operation . . ............. . . . . . . . . . . .6-7
Warranty . . . . . . . ......................... . . . 8
Care and Maintenance. . ........... . . . . ...... . . 8
Warnings and Cautions . . ....... . . . . . ........ . . 8
Replacement Parts . . ........ . . . . .......... . . . 9
Preparation
CAUTION: Do not use sharp tools to remove the protective material, as it may
damage the product. Be careful not to throw away small parts such as bolts, wash-
ers, etc., that may be wrapped in the protective materials.
Before assembling make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product. Contact our customer service representative for
assembly assistance or questions toll free at 1-855-880-7205.
Tools required for Assembly: Open end wrench or adjustable wrench (not included)
Phillips-head screw driver (not included)
Hardware Contents
GG
HH KK E
Part Description Quantity
GG Hex Bolt (M10-1.5x20 A2-70) 4
HH Hex Bolt (M10-1.5x25 A2-70) 9
KK Washer (M10 A2-70) 13
E Hex Wrench 1

3E
Package Contents
HH
GG
G
L
D
CA
B
M
F
Part Description Quantity
A Blow Molded Base Outside (with cap) 2
B Blow Molded Base Inside (with cap) 2
C Lower Cross Leg 1
D Upper Cross Leg 1
G 360° Swivel 1
CAN Umbrella Frame (with canopy) 1
7 Glide Handle 1
L Pole Support Cap 1
P Connected Pole 1
Q Crank Handle 1
Q
7
E
KK
P
M Cap for Blow Molded Base 4
F Holder Pole 1

C
4
E
Assembly
Step 1: Put the cross legs (C & D) on a flat surface. Attach the bottom of
connected pole (P) to the upper cross leg (D) and insert a long bolt (HH)
through a washer (KK) and tighten using the hex wrench (E). Then attach
the 360° swivel (G) to the upper side of the connected pole (P) and insert a
long bolt (HH) through a washer (KK) and tighten using the hex wrench (E).
Finally, put the holder pole (F) onto the upper side of the 360° swivel (G) and
insert a short bolt (GG) through a washer (KK) and tighten using the
hex wrench (E). Double check all bolts if tighten.
Remove all protective materials. Be careful not to throw away small parts
such as bolts, washers, etc. that may be wrapped in the protective materials.
E
G
P
KK
F
GG
KK
HH
HH
D
C

Step 2: Insert the umbrella frame with canopy (CAN) onto the holder pole (F).
At the same time, slide holder pole collar onto the holder pole (F). Place a
long bolt (HH) through a washer (KK) into the holder pole (F) and use the hex
wrench (E) to tighten. Attach canopy crank handle (Q) onto the glide handle (7).
5E
Assembly (continued)
Q
Q
Q
②
E
HH
KK
①
③

Step 1: Unfasten the storage straps around the canopy. To open the umbrella,
squeeze the glide handle (7) and grip to slide up or down to achieve desired
canopy angle. Release the grip to lock into place. To fully open the canopy,
turn the crank handle (Q) until the canopy reaches proper tension. If the crank
becomes too hard to crank, check to see it the rope has come off the pulley.
If you continue to turn the crank, the rope could break.
Step 3: Fill up each blow molded base (A & B) with sand water
and cover with cap (M).
Place the pole support cap (L) onto the holder pole (F) and lay
everything on top of the blow molded base (B).
6
E
Umbrella Operation
M
A
Crank (Q)
Grip
Close
Open
Glide Handle (7)
Canopy Open
L
B
Assembly (continued)

7E
Umbrella Operation (continued)
Step 3: The umbrella has a unique design that moves the pole out of your way
and off to the side. The multiple position canopy can rotate 360° around the axis
of the main pole to shade your desired area.
Step 4: If the canopy does not cover the area on your patio as expected
(does not offer shade to the area), you may need to adjust the position of
the canopy to coveryourdesired area. Step on the footrest to achieve 360°
rotation as shown above. Turn the umbrella pole around its axis to move
canopy over desired area.
360° 1

8
E
Warranty
ONE YEAR WARRANTY
This product is covered under a manufacturer’s one year warranty from date of pur-
chase against defects in materials and workmanship. This warranty does not cover
damage due to neglect, abuse or weather related damage. For full warranty disclo-
sure, email us at customerser[email protected], call toll free at 1-855-880-7205 or
send mail to: 1040 Boulevard SE Ste. B, Atlanta GA 30312.
HOW TO FILE A CLAIM
If you are within your warranty you must have your receipt and pictures of your in-
formation to send to ATLeisure at customerser[email protected], or send by mail
to 1040 Boulevard SE Ste. B, Atlanta GA 30312.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Canopy Care
• Simply clean the umbrella canopy with soft brush and mild detergent.
• DO NOT machine wash or dry.
• DO NOT iron.
• AIR DRY the canopy thoroughly before storing for extended period of time.
Make sure the canopy is completely open during the drying process to prevent
shrinkage.
Warnings and Cautions
1. Read the entire instructions before beginning and follow the steps outlined.
Failure to assemble and install as instructed could result in the umbrella tipping
over causing personal injury and/or property damage.
2. This umbrella is designed for easy operation, sunshade and decoration purpose
only. It is NOT recommended that this umbrella be used during periods of high
wind and rain. Always take the umbrella down during high or gusting wind
and rain, when not in use and in the off-season. Failure to do so may result in
personal injury and/or property damage.
3. Please keep children away from the umbrella during assembly to avoid injury.
NOTE: Placement of the umbrella over or near a swimming pool will cause prema-
ture fading not covered under our warranty, especially darker colors. Please contact
customer service to purchase a replacement canopy.
NOTE: To Prevent damage to the canopy DO NOT leave the umbrella open directly
facing the wind. Always take down the umbrella when not in use and during high or
gusting wind and rain.

9
E
Replacement Parts
For replacement parts, call our customer service department at 1-855-880-7205,
8:00am-5:00pm., EST, Monday-Friday.
Part Description Quantity Re-Order Number
A Blow Molded Base Outside 2 BSE-ABMP-11-BWN-T-C2
B Blow Molded Base Inside 2 BSE-BBMP-11-BWN-T-C2
C Lower Cross Leg 1 CSL-C78RX-BWN-T-C2
D Upper Cross Leg 1 CSL-D78RX-BWN-T-C2
Hardware Kit 1
F Holder Pole 1 HDP-F78RX-BWN-TM
G
KIT
360º Swivel 1 PDL-360-SWVL
HDW-952371-KIT
CAN Canopy 1 CAN-10X13R-8RBS-TN
7 Glide Handle 1 CRK-78RX-BWN
L Pole Support Cap 1 BSE-78PSC
M Cap for Blow Molded Base 4 BSE-CAP-11-BWN
E
F
GG
KK
HH
G
D
B
A
C
CAN
7
L
U.S. Patent No. 8,104,492

ATLeisure, LLC
1040 Boulevard SE, Suite B
Atlanta, Georgia 30312, USA
Customer Service Toll Free 1-855-880-7205
8am - 5pm Eastern Time, Monday through Friday
www.atleisure.com
2020 Distributed by Menard, Inc., Eau Claire, WI 54703
Made in China