Backyard Creations UMB-933060 Installation guide

10’ Solar Offset Umbrella
Assembly & Care Instructions
IMPORTANT : RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
SKU #: 272-3010
Model #: UMB-933060
The schematics in this manual are for assembly and operation illustration only.
They may differ from the actual appearance.
For assistance with assembly, parts, or customer service, please contact:
ATLeisure, LLC
8 AM – 5 PM, Monday - Friday, EST
Email: [email protected] or Chat: https://help.atleisure.com
DO NOT RETURN TO STORE
2023 Distributed by Menard, Inc., Eau Claire, WI 54703
Made in China

2E
Contents
Canopy Care . . . . ........... . . . . . . . . . . ... . . . . 2
Warnings and Cautions . . ....... . . . . . ........ . . 2
Preparation . ..... . ....... . ....... . . . .... . . . . 3
Package Contents ......... . . . . . ............. . 3
Umbrella Assembly . . ....... . . . . . ........... .4-6
Umbrella Operation . . ............. . . . . . . . . . . .7-9
Warranty . ............. . ....... . . . ....... . . . 10
Replacement Parts . . . ............. . . . . . . . . . . . 10
Canopy Care
• Simply clean the umbrella canopy with soft brush and mild detergent.
• DO NOT machine wash or dry.
• DO NOT iron.
• Air dry the canopy thoroughly before storing for extended period of time.
Make sure the canopy is completely open during the drying process to prevent
shrinkage.
Warnings and Cautions
1. Read the entire instructions before beginning and follow the steps outlined.
Failure to assemble and install as instructed could result in the umbrella tipping
over causing personal injury and/or property damage.
2. This umbrella is designed for easy operation, sunshade and decoration purpose
only. It is NOT recommended that this umbrella be used during periods of high
wind and rain. Always take the umbrella down during high or gusting wind
and rain, when not in use and in the off-season. Failure to do so may result in
personal injury and/or property damage.
3. Please keep children away from the umbrella during assembly to avoid injury.
NOTE: Placement of the umbrella over or near a swimming pool will cause prema-
ture fading not covered under our warranty, especially darker colors. Please contact
customer service to purchase a replacement canopy.
NOTE: To Prevent damage to the canopy DO NOT leave the umbrella open directly
facing the wind. Always take down the umbrella when not in use and during high or
gusting wind and rain.
How to Replace Battery . . ....... . . . . . .... . . . . 11

3E
Package Contents
Part Description Quantity
C Lower Cross Leg 1
D Upper Cross Leg 1
F Holder Pole 1
N 1
GG Hex Bolt (M8x20) 4
HH Flat Washer (M8) 4
Preparation
Remove all protective materials. Be careful not to throw away small parts such as
bolts, washers, etc., that may be wrapped in the protective materials.
Before assembling make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the
product. Contact our customer service representative for assembly assistance
at [email protected] or chat with us at https://help.atleisure.com.
Estimated Assembly Time: 20 minutes
Tools required for Assembly: Open end wrench or adjustable wrench (not included)
D
C
GG
HH
F
1
SSolar Panel
S
N
Umbrella frame with Canopy

N
Assembly
4E
（ ）
Then screw the solar panel clockwise.

5E
Assembly
F
GG
HH D
C
D
C
Step 2:
Step 3: Attach the holder pole (F) to the cross legs the bolts (GG)
and washers (HH) . Adjust the holder pole (F) to be sure that it is positioned
correctly on the base and tighten the bolts. Be Careful to not over tighten
the bolts.
Place the upper cross leg (D) on the top of lower cross leg (C)
intsert

6E
Assembly (continued)
Step 4: Insert the pole of the Umbrella Frame with Canopy (N) into the Holder
Pole (F) until the lower fixed stop pin sits on the Holder Pole ring. Tighten the
two control knobs to secure the main pole.
WARNING: Be sure to secure and/or weight the cross leg base of the umbrella with at
least 200 lbs to prevent the umbrella from tipping over with umbrella base (sold
separately)
Pin
Holder Pole Ring
Control Knob

7E
Umbrella Operation
Step 1: Unfasten the storage straps if fastened.
Step 2: Unlock the extension arm clamp (K) and the vertical lift mechanism
clamp (H). Extend the umbrella extension arm outwards while lifting the
vertical lift mechanism upwards. Fully the umbrella
K
H
Storage
straps
arm.open

8E
Umbrella Operation (continued)
Step 3: When the umbrella arm is fully extended, lock the two clamps (K and
H). Slide the lock cover (G) into the locking mechanism on the back side of
the vertical lift mechanism.
Step 4:
K
H
J
Lock
Cover (G)
off
ON
J
Turn ON/OFF solar lights.
Turn the crank (J) clockwise to open the umbrella completely. To
close, turn the crank (J) counter-clockwise

9E
Umbrella Operation (continued)
Step 5: Slide back the lock cover (G) away from the vertical lift mechanism
before lowering the umbrella.
WARNING: Failure to slide back the lock cover (G) away from the vertical lift
mechanism before lowering the umbrella arm will cause non-repairable damage
to the locking parts (K and H).
Next, unlock the extension arm clamp (K) and the vertical lift mechanism clamp
(H). Retract the umbrella extension arm inwards while pushing the vertical lift
mechanism downwards.
K
J
Lock
Cover (G)
H
G
CRITICAL STEP
This will fully fold the umbrella.

10 E
Warranty
ONEYEAR WARRANTY
This product is covered under a manufacturer’s one year warranty from date of
purchase against defects in materials and workmanship. This warranty does not
cover damage due to neglect, abuse or weather related damage. For full warranty
disclosure, email us at [email protected] or chat with us at
https://help.atleisure.com. HOW TO FILE A CLAIM, If you are within your warranty,
you must have your receipt and pictures of your issue to send to ATLeisure at
[email protected].
Replacement Parts
For replacement parts, email us at [email protected] or chat with
us at https://help.atleisure.com, 8:00am-5:00pm., EST, Monday-Friday.
Holder Pole (with
control knobs)
Description Picture Re-order Number
Canopy
Upper Cross Leg
Lower Cross Leg
HDP-F48X-BWN-T
CAN-10B6RBP-T
CSL-D48X-BWN-T
CSL-C48X-BWN-T
Solar Panel SOL-933060

11
|How to Replace Batteries
We recommend that you change the battery in your solar light umbrella every year or
when you feel the light output is diminished. For best results buy (1) 18650 Lithium
00mAh rechargeable battery same as supplied with panel. Install only new batteries.
*Failure to insert battery in the correct polarity, as indicated inthe battery compartment, may
shorten the life of the battery or cause the battery toleak. Do not dispose of battery in fire.
Battery should be recycled or disposed of as perstate and local guidelines. Do not mix old and
new batteries. Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium)
or (Nickel Metal Hydride) batteries.
Tools required: Phillips head screw driver (not included).
Step 1: counterclockwise and remove
the solar panel from the top of the umbrella
as shown in Fig 7.
Step 3: Put the solar panel upside down
on a flat, non-abrasive surface to avoid
scratching. Loosen all screws on the
solar panel bottom case as shown in
Fig. 9.
Step 4: Carefully open the bottom
case and set aside. Fig.10. Replace
the batteries, matching the +/- on the
batteries with the +/- on the battery
case as shown in Fig. 10.
Step5: . Carefully put the bottom
case back. Align the screw holes
Do not over
tighten the screws as shown in Fig. 11.
Step 2 of the socket
under the solar panel. Pull by holding the
plug, not by pulling on the wires as shown
in Fig 8.
Fig. 7
Fig.8
Fig. 9
Fig. 10
For everyday normal use, turn on
the light switch at night when you
want to use solar light and turn
off the switch after use.
Fig. 11
2000mAh rechargeable battery same as supplied with panel. Install only new batteries.
E
then tighten the screws.
Screw
: Pull out the plug
Your solar umbrella is
ready to use again!

12 E
For assistance with assembly, parts, or customer service, please contact:
ATLeisure, LLC
8 AM – 5 PM, Monday - Friday, EST
Email: [email protected] or Chat: https://help.atleisure.com
DO NOT RETURN TO STORE
2023 Distributed by Menard, Inc., Eau Claire, WI 54703
Made in China