Backyard Creations UMB-952370 Installation guide

10x13ft Rectangle Offset
Umbrella with Resin Base
Assembly & Care Instructions
IMPORTANT : RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
SKU #: 272-1746
Model #: UMB-952370
ATLeisure, LLC
Toll Free: 1-855-880-7205 (English is offered)
8am - 5pm, Monday through Friday, Eastern Standard Time
Email: customerser[email protected] or visit our website at www.atleisure.com
DO NOT RETURN TO STORE
2017 Distributed by Menard, Inc., Eau Claire, WI 54703
Made in China
The schematics in this manual are for assembly and operation illustration only.
They may differ from the actual appearance.
For assistance with assembly, parts, or customer service, please contact:

2
E
Contents
Preparation .................................2
Hardware Contents ...........................3
Package Contents ............................3
Umbrella Assembly ..........................4-5
Umbrella Operation ..........................5-6
Warranty ...................................7
Care and Maintenance.........................7
Warnings and Cautions ........................7
Replacement Parts ...........................8
Preparation
CAUTION: Do not use sharp tools to remove the protective material, as it may
damage the product. Be careful not to throw away small parts such as bolts, wash-
ers, etc., that may be wrapped in the protective materials.
Before assembling make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product. Contact our customer service representative for
assembly assistance or questions toll free at 1-855-880-7205.
Tools required for Assembly: Open end wrench or adjustable wrench (not included)
Phillips-head screw driver (not included)
Hardware Contents
GG
HH
Part Description Quantity
GG Hex Bolt (M10-1.5x20 A2-70) 4
HH Flat Washer (A2-70) 4

3E
Package Contents
C
GG
HH
D
N
EA
B
L
7
Part Description Quantity
A Blow Molded Base Outside (with cap) 2
B Blow Molded Base Inside (wait cap) 2
C Lower Cross Leg 1
D Upper Cross Leg 1
N Umbrella Frame (with canopy) 1
CAN Canopy (on the umbrella frame) 1

4
E
Assembly
D
GG
HH C
N
GG
HH
L
D
C
Step 1: Place Lower Cross Leg (C) on the ground, line up notches and place
Upper Cross Leg (D) over the Lower Cross Leg (C).
Step 2: One person should hold the umbrella frame with canopy (N) and place
it onto the cross leg base. Then the other person lifts the Pole Support Cup
(L) up and attach the umbrella frame with canopy (N) to the cross leg base by
using Bolts (GG) and Washers (HH). Adjust the umbrella frame with canopy (N)
to be sure it is positioned correctly on the base. Finally tighten all the bolts and
be careful not to over tighten.

5E
Assembly (continued)
MN
Step 3: Place the Blow Molded pieces (A and B) over the cross legs. Fill up
each Blow Molded Base (A and B) with sand and water, then cover with caps.

6
E
Umbrella Operation
①
②
Close
Open
Crank
Glide Handle Lever clamp
Canopy open
Step 1: Unfasten the storage straps around the canopy.
Step 2: To open the umbrella, squeeze the Glide Handle and grip together and
slide up or down the pole to achieve the desired tilting angle. Release the grip
to lock into place. To open the canopy, turn the crank handle clockwise until the
canopy is fully open as pictured.

7E
Umbrella Operation (continued)
E
F
360°
Step 3: The multiple position canopy can rotate 360°around the axis of the
main pole to offer the shade on your expected area around the umbrella.
Step 4: To rotate umbrella insert the crank handle (E) into holder pole (F) and
turn to desired position.

8
E
Warranty
90 DAY WARRANTY
This product is covered under a manufacturer’s 90 day warranty from date of pur-
chase against defects in materials and workmanship. This warranty does not cover
damage due to neglect, abuse or weather related damage. For full warranty disclo-
sure, email us at customerser[email protected], call toll free at 1-855-880-7205 or
send mail to: 1040 Boulevard SE Ste. B, Atlanta GA 30312.
HOW TO FILE A CLAIM
If you are within your warranty you must have your receipt and pictures of your in-
formation to send to ATLeisure at [email protected], or send by mail
to 1040 Boulevard SE Ste. B, Atlanta GA 30312.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Canopy Care
• Simply clean the umbrella canopy with soft brush and mild detergent.
• DO NOT machine wash or dry.
• DO NOT iron.
• AIR DRY the canopy thoroughly before storing for extended period of time.
Make sure the canopy is completely open during the drying process to prevent
shrinkage.
Warnings and Cautions
1. Read the entire instructions before beginning and follow the steps outlined.
Failure to assemble and install as instructed could result in the umbrella tipping
over causing personal injury and/or property damage.
2. This umbrella is designed for easy operation, sunshade and decoration purpose
only. It is NOT recommended that this umbrella be used during periods of high
wind and rain. Always take the umbrella down during high or gusting wind
and rain, when not in use and in the off-season. Failure to do so may result in
personal injury and/or property damage.
3. Please keep children away from the umbrella during assembly to avoid injury.
NOTE: Placement of the umbrella over or near a swimming pool will cause prema-
ture fading not covered under our warranty, especially darker colors. Please contact
customer service to purchase a replacement canopy.
NOTE: To Prevent damage to the canopy DO NOT leave the umbrella open directly
facing the wind. Always take down the umbrella when not in use and during high or
gusting wind and rain.

9E
Replacement Parts
For replacement parts, call our customer service department at 1-855-880-7205,
8:00am-5:00pm., EST, Monday-Friday.
7
E
L
A
B
D
GG
HH
C
L
Part Description Quantity Re-Order Number
A Blow Molded Base Outside 2 BSE-ABMP-BWN
B Blow Molded Base Inside 2 BSE-BBMP-BWN
C Lower Cross Leg 1 CSL-C78RX-BWN
D Upper Cross Leg 1 CSL-D78RX-BWN
E 360° Holder Pole Crank 1 CRK-E78RHP-BWN
GG Bolts 4 HDW-GG
HH Washers 4 HDW-HH
CAN Canopy 1 CAN-10X1308RBP-?
7 Crank 1 CRK-778RG-BWN
L Pole Support Cup 1 PSC-L78RG-BWN
M Cap for Blow Molded Base 4 BSE-CAP-11-BWN

10
E

11 E

ATLeisure, LLC
1040 Boulevard SE, Suite B
Atlanta, Georgia 30312, USA
Customer Service Toll Free 1-855-880-7205
8am - 5pm Eastern Time, Monday through Friday
www.atleisure.com
2017 Distributed by Menard, Inc., Eau Claire, WI 54703
Made in China