Backyard Expressions 909939 User manual

Page 1
UPC:6-81129 -14913-1
UPC:6-81129 -14908-7
UPC:6-81129 -14907-0
Item No:914913
UPC:6-81129 -14912-4
Item No:914912
ASSEMBLY INSTRUCTIONS(https://www.youtube.com/watch?v=2xgCAg5-IQg)
Item Name/Description : 57 Qt Wooden Flag Cooler
Holds up to 64 cans plus ice
Irish
Mexican
German
Item No:914909
UPC:6-81129 -14909-4
Item No:914911
UPC:6-81129 -14911-7
Item No:914908
Item No:914907
Australian
British
Item No:909939
UPC Code：6-81129 -09939-9
Canadian

6. Avoid children climbing on,playing in or hiding in cooler!
3. Please keep all packaging materials from your child as
they are potentially dangerous to your child!
WARNING
5.This cooler is NOT a seat !
7.POWER TOOLS ARE NOT NECESSARY TO ASSEMBLE
THIS PRODUCT AND ARE DISCOURAGED,WOOD
DAMAGE COULD OCCUR
Page 2
1. This cooler is NOT a toy !
2. Adult assembly required!
4. Please keep child away while assembling as packaging or
unassembled parts may be a choking hazard or cause injury!

• Parts List
Page 3
Step 1:Place the cooler body on the side or
upside down. Secure the four legs (B) to
the cooler body (A) using the large screws
(G--24PCS).
G: Large Screw--26PCS
A: Cooler Body With
Decor Flag--1PC
B:Legs--4PCS
B1+B2
ASSEMBLY INSTRUCTIONS
H: Medium Screw-12PCS
E: Bottle opener--1PC
C:Small Star--3PCS
Decor Flag Will Vary Depending On Purchase
F:metal stablizer--4PCS
D:Cast Iron Handle-3PCS
I: Short Screw-24PCS
Attention:Each leg assembly
needs Large screws(G--
6PCS)
A
B1
B2
B1
B2
G
G
G

Page 4
Step 4: Attach the decorative pieces (C)
to the top or front of the cooler body.
Carefully attach one handle (D) to each side of
the cooler body using medium screws(H--4PCS).
Carefully secure one handle (D) to the lid of
the cooler body using medium screws (H--
2PCS) in the rear handle holes, and short
screws (I--2PCS) in the front holes -
be careful NOT to push screws through
bottom of lid. Attach the bottle opener (E) to
the front of the cooler body using large
screws(G--2PCS).
Note:Attach handle with 4 screws(H--
2PCS&I--2PCS), Be careful to position handle
so screws enter insulation and are not exposed
beneath the lid.
Step 2: Securely fasten the metal stablizers
(F) to the inside of each leg using short
screws (I--5PCS) on the holes into legs. Use
medium screw (H --1PC) to secure bracket UP
into base of cooler on front 2 legs, short
screw (I) should be used to secure bracket to
cooler body on rear legs. Do not use long or
medium screws into side legs
Step 3: With two people, stand the cooler in an upright postion.
H
I
F
C
H
I
H
E
G
D

To Care for the Cooler:
Leaving the cooler in prolonged sunlight or rain will weather the wood.
Reseal the wood surface every six months or as needed.
Please use water or mild detergent and soft cloth to clean the inner compartment.
Do not scratch or scour
It is recommended to store your cooler box in a dry place.
Our wooden coolers with either galvanized steel or plastic polyurethane lining can be cleaned
using a solution of mild soap and warm water. Be sure to rinse with hot soapy water and drain
completely. If there is a tough stain, use baking soda and water to remove. Remove odors with a
diluted solution of chlorine bleach and water. If an odor persists, wipe interior with a cloth
saturated with vanilla extract, then leave the cloth in the cooler overnight. We know it sounds
far-fetched, but it really does work. Always air dry with the lid open before storing. During
long periods of non-use, store furniture in covered and dry place. For the least maintenance, use
under covered area.
The cooler may be prone to tipping over during high winds. Please take necessary precautions to
prevent tipping.
page 5
Step 5: Before using the cooler, please secure the drain to the bottom hole of the cooler body.
Please note: the 2 washers on the drain should be put on in the following manner -- one is above the
drain on the bottom hole, and the other is below the drain. Finally insert and attach the drain to
the cooler. Remember to tighten the drain valve on the underside of the cooler body to prevent
leaking. Please note, at times, condensation may occur on the bottom of the cooler.

To maximize ice retention, prechill your cooler before filling completely with high-quality ice and
chilled beverages and product. A warm cooler, excess air space and warm beverages may
result in rapid ice melt. Page 6
Dear friends – Thank you for purchasing one of our most popular coolers.
Any product used outdoors will require care and maintenance, our wooden cooler is no
different. Natural weathering and cracking will occur as the wood expands and contracts while
exposed to the natural elements. DDI does not warranty the finish of the wood due to
weathering or other natural elements that could affect the wood. These factors do not
constitute a reason to reject the product, it only improves the character and does not affect the
structural integrity of the product. We recommend the use of outdoor paint or stain for our
patio wood furniture to help protect against the elements and prolong the life of the product.
Periodic cleansing and recoating may be necessary. When properly maintained, you will love the
way the cooler weathers AND provides enjoyment for many seasons.
Any claims made about the finish of the wood will be subject to DDI’s discretion. All products
are subject to slight variations in color, shape or size due to manufacturing process and the
nature of wood products. DDI, Inc. cannot be held responsible or liable for any inconvenience,
damage, loss or injury due to possession, use or misuse of our products. Customers are solely
responsible for ensuring the safety of any person or persons utilizing the furniture regardless of
age while using, storing, holding, or owning our products.
The interior of the cooler should be maintained as well – after use, completely drain, dry and
clean the inside with a soft, damp cloth and MILD, non-abrasive cleanser and “prop” the lid
open to allow air to circulate. The drain cap works GREAT for this- remove drain cap from
drain, place it between the lid and cooler body so the lid does NOT close completely. The
interior of the cooler will be susceptible to rust or staining if not properly maintained. DDI will
not warranty the cooler against rust if not properly maintained. A cloth with vanilla extract left
inside keeps the interior smelling great.

page 7
See Page 1