Badger Basket Elite 850 User manual

1.0/0205
MODEL #’s:
850 White/Sage Gingham
851 Ecru/Beige Gingham
NAME: Elite™ Oval Baby
Bassinet w/Bedding & Canopy
TOOLS NEEDED:
PhillipsScrewdriver
*Powerscrewdriverishelpfulbutbecareful
not to damage the bassinet.
Pliers
Hammer
ASSEMBLY INSTRUCTIONS
Adult Assembly Required
Save these instructions for future use
Visit us online at www.badgerbasket.com
Toll-Free Customer Service: 1-800-236-1310
(Monday to Thursday 7:30 AM-5:00 PM CST)
[email protected]
PLANT AND GENERAL OFFICE:
PO Box 227, Edgar, WI 54426-0227
Phone: [phone] Fax: [phone]
CORPORATE OFFICE:
111LionsDr., Suite 220,Barrington,IL60010
Stop sign graphic on page 2 is © Street Signs USA
BASE PARTS INCLUDED:
(A) 2 - End Panels
(B) 2 - Bottom Rails w/ Grooves
(C) 2 - Top Rails
(D) 8 - 2” Wood Screws
(E) 1 - Bottom Shelf
(F)4 - CasterWheels (includes:
4 wheels, 4 knobs, & 4 nuts)
BASSINET & BEDDING
PARTS INCLUDED:
(G)4-T-Nuts
(H) 4 - 1¼” Bolts
(I)1-OvalBassinetBody
(notshown)
(J) 1 - Fabric Skirt*
(K) 1 - Canopy Pole
(L)1-Canopy Frame
(M)1-FabricCanopy*
(N)1 -FabricBumper*
(O)1-FabricFittedSheet*
(P)1-OvalMattressPad(not shown)
* Bedding can be washed and ironed before assembly if desired.
ABC
E
F
A
L
O
J
M
N
K
DG H
Hardware not shown to scale
Page 1 of 5

1.0/0205
Page 2 of 5
BEFORE YOU BEGIN ASSEMBLY:
Ensure that all the parts and hardware listed are included.
If anything is missing, please DO NOT return the product to the store.
Call or e-mail us for assistance. If you should have any questions at any time
during assembly, we’re here to help!Your satisfaction with our product is
important to us. Please call or e-mail with any questions or feedback.
E
A
PICTURE 2
STEP 2: See PICTURE 2.
Take the BOTTOM SHELF (E) and slide it
into the grooves on the BOTTOM RAILS
(B) with the white side facing up.
Attach the SECOND END PANEL (A) to
the BOTTOM RAILS (B) and TOP RAILS
(C) using the remaining FOUR WOOD
SCREWS (D) (one screw for each rail).
PICTURE 1
A
B
B
CCSTEP 1: See PICTURE 1.
Take ONE END PANEL (A) and attach the
TWO BOTTOM RAILS WITH GROOVES
(B) using TWO WOOD SCREWS (D) (one
screw for each rail).
Be sure the grooves are facing in so you can
insert the bottom shelf later.
Attach the TWO TOP RAILS (C) to the
same END PANEL(A) using TWO WOOD
SCREWS (D) (one screw for each rail).

1.0/0205
Page 3 of 5
STEP3: See PICTURES 3Aand3B.
Turnthebassinetstand upside down.
Attach ONE CASTER WHEEL (F) to
EACH LEG of the bassinet stand using
ONE BOLT and ONE NUT for each
WHEEL.
Tighteneachwheel securelyusingpliersif
necessarytoturnthenuts.TheBASSINET
STAND is now assembled.
STEP4:See PICTURE4.
Locate the FOUR T-NUTS (G) and FOUR 1¼”
BOLTS (H) so you can bolt the OVALBASSINET
BODY(I) to the BASSINETSTAND.
This step is easiest to do if you put the oval
bassinetbody upside down onthe floor, and then put
thebassinet stand upside down ontop of the bassinet
bodyasshownin PICTURE4.
Lineupthefourholesonthestandwiththefour
holesonthebody.
Insert the FOUR T-NUTS (G) into the four
holesonthe TOP RAILS (C).
TheninserttheFOUR1¼”BOLTS(H)through
the four holes on the OVAL BASSINET BODY (I)
andsecurelyscrewthem intotheFOURT-NUTS(G).
STEP5:See PICTURE5.
With thebassinetinits correct,uprightposition,
wrap the FABRIC SKIRT (J) around the
LOWERrimoftheOVALBASSINETBODY
(I)pressing the grip tapestrips together as you
goaround
Beginattherear center wherethemetalspindle
islocated.
Theendsoftheskirtwillmeetatthestartingpoint
andoverlap.
J
I
C
C
PICTURE 4
PICTURE 5
FF
FF
PICTURE 3A PICTURE 3B

1.0/0205
Page 4 of 5
STEP6:See PICTURE6.
TherearetwoholesonthemetalspindleontheBASSINETBODY
(I) so that you can adjust the height of the canopy. Choose the
heightyouwant.Insert the METALCANOPYPOLE (K)intothe
metalspindleon thebassinetbody(I), andsnapthepushbuttonon
thepoleintotheholeon the spindle. Makesurethecanopypoleis
heldsecurelyinposition.
STEP7:See PICTURE7.
Graspthetwofree ends of the CANOPY FRAME (L) and,hold-
ingthemtogether,insertthemintothetop oftheCANOPYPOLE
(K).Tapgently withahammeruntilthe endsoftheframeare fully
seatedinsidethepole.
Next, place the FABRIC CANOPY (M) onto the CANOPY
FRAME(L)andtieittothe frame with the ribbons.
STEP8:See PICTURE8.
Position the FABRIC BUMPER (N) inside the OVAL
BASSINETBODY (I). Secure thetabs on the bumper
tothethickerdowels andtietheribbons,and thentiethe
remainingribbons tothethinnerdowels.
NOTE: Be sure the bumper is secured and check
the ribbons regularly to make sure they stay tied.
Loosebedding can beadangertoyourbaby,so it’s
veryimportanttomakesurethetiesand fabric tabs
areusedproperlytosecurethebumper.
STEP9:See PICTURE8.
Putthe FABRIC FITTEDSHEET (O) onto theOVAL
MATTRESS PAD (P) andplace the sheet andpad
insidethebassinet.
Additionalsheetsaresoldseparately(Model#00026)!
Checkourweb site at www.badgerbasket.comfor
moreinformationortofindaretailer.
K
Pushbuttonon
canopypole
(K)mustsnap
intothehole
onthemetal
spindle.
PICTURE 6
N
PICTURE 7
K
L
N
O, P
PICTURE 8

1.0/0205
STEP10: See PICTURE 9.
Adjusttheskirtandcanopyso they are positioned
toyourliking.
CheckALLOFTHESCREWS,T-NUTS,AND
BOLTSto makesuretheyarefully tightened.
Carefullyreview thesafety
informationbelow.
Your ELITE™ OVALBABYBASSINETisnow
readyforyournewborn!
NOTE:Yourbeddingand canopymayvaryin
color, pattern, and/orstyle
fromwhatis shownhere.
Page 5 of 5
PICTURE 9
DO NOT use this bassinet if your baby exceeds any of the age, weight, or activity limits
mentioned above. Baby could fall out and be seriously injured.
DO NOT move the bassinet with your baby inside of it.
DO NOT allow children or pets to hang on or pull on the bassinet.
It could tip over and your baby could fall out.
DO NOT attach or place toys with strings in or around the bassinet.
Strings can cause strangulation or choking.
DO NOT put loose bedding or stuffed animals into the bassinet that
could cause suffocation.
Keep bassinet away from stoves, heaters, camp fires, fireplaces, stairs, open windows,
window blinds, running or standing water, and any other hazard
which could cause injury to your baby.
! ! WARNING! ! ATTENTION ! !
FOR YOUR CHILD’S SAFETY
TO PREVENT SERIOUS INJURY OR DEATH:
ThisBadgerbassinet is a safeplacefor your newborn babytosleep until Baby is:
3-4monthsoldOR 20lbs.(9.1 kg)ORwhen Baby canpushup,rollover,or
crawl-whicheverlimitcomesfirst.