Badger Basket Tea Party Motif Play Kitchen 09970 User manual

1.0/0209/WL
MODELNUMBER:
09970
TEAPARTY MOTIF
PLAYKITCHEN
Assembly Instructions.
Adult Assembly Required.
Read all instructions before use.
Save instructions for future use.
VERSIONCODE:
1.0/0209/WL
Visit us online at www.badgerbasket.com
Toll-FreeCustomerService:1-800-236-1310(MondaytoThursday7:30AM-4:30PMCST)
Web: http://www.badgerbasket.com/parts•E-mail: [email protected]
Mail: PO Box 227,Edgar, WI54426-0227• Phone:[phone]•Fax: [phone]
Page 1 of 6

1.0/0209/WL
BEFORE YOU BEGIN ASSEMBLY:
Check all parts and hardware. If anything is missing or not satisfactory, please DO
NOT call the store or return the product to them. Contact Badger Basket. Most
problems are resolved without you needing to leave home. When contacting us,
please have this instruction manual, your product model number, and your product
version code ready. For fastest service, go to http://www.badgerbasket.com/parts
Your Product Version Code is: 1.0/0209/WL
Page 2 of 6
READ ALL INSTRUCTIONS before use of this product. Keep instructions for future use. Use only the parts and
hardware provided by Badger Basket. Do not use the product if it is damaged or broken. Product and/or hardware may
include small parts or screws with sharp points. Choking Hazard! Keep unassembled parts out of the reach of small
children. DO NOT allow anyone to climb or play on or inside of this product. Periodically check to make sure all the
screws remain tight. The holes in the back panel of this product are in compliance with safety standards and are not a
product defect. This item is designed for children who are THREE (3) YEARS OF AGE AND OLDER.
WARNING - FAILURE TO FOLLOW THESE WARNINGSAND THE
INSTRUCTIONSCOULDRESULTINSERIOUSINJURYORDEATH
ASSEMBLY NOTES:
Assemble the item on a carpeted surface to prevent scratches or damage during assembly. Do not fully
tighten all of the hardware until all parts are in position; then go back and tighten everything securely (but
do not overtighten). A power screwdriver is helpful for assembly but keep your torque setting low so you
do not damage the product or strip the hardware.
USE AND CARE INSTRUCTIONS:
Wipe clean with a damp cloth and mild soap as needed.