Badger Basket 01014 User manual

MODEL NUMBER*:
01014
VERSION CODE*:
4.0/0819/TG
* These numbers are needed if
replacement parts are requested
BLOSSOMS & BUTTERFLIES
DOLL HIGH CHAIR
Badger Basket®, PO Box 227, Edgar, WI 54426-0227 USA • Web: www.badgerbasket.com
U.S. Based Customer Service Toll-Free (Mon-Thurs 7:00 AM-4:00 PM CST): 1-800-236-1310
Phone: [phone] • Fax: [phone]
FOR REPLACEMENT PARTS:
http://www.badgerbasket.com/parts
•assembly video available at Badger Basket’s YouTube channel!
Assembly Instructions. Adult Assembly Required.
Read all instructions before use.
This manual is part of the product and
must be kept for future reference.

BEFORE YOU BEGIN ASSEMBLY:
Check all parts and hardware. If anything is missing
or not satisfactory, please DO NOT call the store
or return the product to them. Please go online to:
http://www.badgerbasket.com/parts
Most problems are resolved
without you needing to leave home.
When contacting us, please have this
instruction manual, your product model number,
and your Version Code ready.
Your Model Number is: 01014
Your Version Code is: 4.0/0819/TG
CARE INSTRUCTIONS:
Wipe clean with a damp cloth and mild soap and dry thoroughly.
Spot clean fabric as needed with cold water and mild detergent and allow to air dry.
WARNING
ADULT ASSEMBLY REQUIRED. DUE TO THE PRESENCE
OF SMALL PARTS AND SHARP POINTS DURING
ASSEMBLY, KEEP OUT OF REACH OF CHILDREN UNTIL
ASSEMBLY IS COMPLETE.
WARNING - CAUTION
READ ALL INSTRUCTIONS before use of this
product. Use only the parts provided by Badger
Basket®. Keep instructions for future use.
Do not use the product if it is damaged or broken. Periodically inspect the product to
ensure all parts remain tight. This item is a toy for dolls only. It is never to be used
for real infants or pets. No product is a substitute for adult supervision. Always
supervise your child during play. For children ages three (3) years and older.
Never sit on or stand on the toy.
JASSEMBLY TIPS! Review the entire manual before beginning. Leave hardware slightly loose
during assembly and then go back and tighten fully at the end. If using a power screwdriver,
keep torque setting low and go slow to prevent damage to the product.

I - Short Screw
J - Long Screw and
Plastic Spacer Set
1
A
B

I
I
I
I
I
2
3
G
F
E
C
A
D

4
5
J
J
In STEP 3, insert the PLASTIC SPACERS (J) into the TRAY
ARMS (H) first, and then attach the TRAY (H) to the
SIDES (C and G) using the LONG SCREWS (J).
H