Badger Basket ADVENTURE FIRE STATION User manual

1.0/0712/TG
ADVENTURE FIRE STATION
PRODUCT MODEL
NUMBER:
40502
VERSION CODE:
1.0/0712/TG
Assembly Instructions.
Adult Assembly Required.
Read all instructions before use.
This manual is part of the product and
must be kept for future reference.
FOR REPLACEMENT PARTS: http://www.badgerbasket.com/parts • E-mail: [email protected]
Toll-Free: 1-800-236-1310 (Monday to Thursday 7:30 AM-3:30 PM CST)
Mail: PO Box 227, Edgar, WI 54426-0227 • Phone: [phone] • Fax: [phone]
Visit us online at www.badgerbasket.com
If you need product
parts, see Page 2!

1.0/0712/TG
CARE INSTRUCTIONS:
The re station can be wiped clean with a very lightly dampened cloth if it is
dried immediately. Never soak the re station or leave water on the surface.
BEFORE YOU BEGIN ASSEMBLY:
Check all parts. If anything is missing or not
satisfactory, please DO NOT call the store
or return the product to them. Please go online to:
http://www.badgerbasket.com/parts
Most problems are resolved
without you needing to leave home.
If contacting us, please have this
instruction manual, your product model number,
and your Version Code ready.
Your Model Number is: 40502
Your Version Code is: 1.0/0712/TG
WARNING - CAUTION
WARNING
ADULT ASSEMBLY REQUIRED
DUE TO THE PRESENCE OF SMALL PARTS AND SHARP
POINTS DURING ASSEMBLY, KEEP OUT OF REACH OF
CHILDREN UNTIL ASSEMBLY IS COMPLETE.
READ ALL INSTRUCTIONS before use of this product. Use only the parts
provided by Badger Basket. Keep instructions for future use. Do not use the
product if it is damaged or broken. This item is a toy only.
For children ages three (3) years and older.
Never attempt to sit or stand on the toy. It is not a step stool or ladder.
No product is a substitute for adult supervision.
Always supervise your child during play.

1.0/0712/TG
PARTS INCLUDED:
FINAL ASSEMBLY DIAGRAM:
* Actual product and parts may vary slightly from the drawing.
Dx1 - SECOND
FLOOR WALL
Ax1 - FIRE
STATION BODY
Cx1 - FIRST
FLOOR WALL
Bx1 - SECOND FLOOR
Ex1 - ROOF
A
B
C
D
E

1.0/0712/TG
STEP 1 STEP 2
STEP 3A STEP 3B
STEP 4
STEP 5
Fold up the long sides of the (A) FIRE STATION
BODY to the position shown in STEP 2.
Fold up the short sides of the
(A) FIRE STATION BODY and insert
the tabs into the slots on the long sides.
Assemble the (B) SECOND FLOOR,
by positioning it as shown and inserting the tabs
on the left, right, and back.
Be sure the tabs on the back panel are folded
open to keep the oor secure and stable.
Insert the (C) FIRST FLOOR WALL and
(D) SECOND FLOOR WALL and secure
the tabs at top and bottom.
Attach the (E) ROOF by positioning it
as shown and insert the tabs on the
left, right, and bottom as needed.
STEP 6
The FIRE STATION is complete! Refer to
FINAL ASSEMBLY DIAGRAM
on page 3!