Badger Basket 9923 User manual

2.0/0309/HF
PRODUCT MODEL
NUMBER:
09923
Page 1 of 4
DOUBLE DOLL STROLLER
Assembly Instructions.
Adult Assembly Required.
Read all instructions before use.
Save instructions for future use.
VERSION CODE:
2.0/0309/HF
Visit us online at www.badgerbasket.com
Toll-Free Customer Service: 1-800-236-1310 (Monday to Thursday 7:30 AM-4:30 PM CST)
Web: http://www.badgerbasket.com/parts • E-mail: part[email protected]
Mail: PO Box 227, Edgar, WI 54426-0227 • Phone: [phone] • Fax: [phone]

2.0/0309/HF
BEFORE YOU BEGIN ASSEMBLY:
Check all parts and hardware. If anything is missing or not satisfactory, please
DO NOT call the store or return the product to them. Contact Badger Basket.
Most problems are resolved without you needing to leave home.
When contacting us, please have this instruction manual, your product model
number, and your product version code ready.
For fastest service, go to http://www.badgerbasket.com/parts
Your Product Version Code is: 2.0/0309/HF
WARNING - FAILURE TO FOLLOW THESE
WARNINGS AND THE INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH
READ ALL INSTRUCTIONS before use of this product. Keep instructions for future
use. Use only the parts and hardware provided by Badger Basket. Do not use the
product if it is damaged or broken. Product must be assembled by an adult. Product
and/or hardware may include small parts or screws with sharp points.
Choking Hazard! Keep unassembled parts out of the reach of small children.
DO NOT allow anyone to climb or play on this product. Periodically check to
make sure all the parts remain tight. This item is designed for children who
are THREE (3) YEARS OF AGE AND OLDER. IT IS A TOY ONLY AND
NOT FOR USE WITH REAL INFANTS OR PETS.
Ax1
Dx1
Cx4
PARTS INCLUDED:
(A) 1 - Stroller Body/Frame
(B) 2 - Wheel Axles
(C) 4 - Wheels
(D) 1 - Canopy
Bx2
Page 2 of 4
CARE INSTRUCTIONS:
Metal parts can be wiped clean
with a damp cloth. Fabric parts are
poly/cotton. Spot clean canopy as
needed. Seats and basket can be
removed for spot cleaning or hand
washing and air dry.

2.0/0309/HFPage 3 of 4
PICTURE C
STEP 1. SEE PICTURE A.
Unfold the body/frame.
STEP 2. SEE PICTURE B.
Insert the front and rear axles
through the holes on the stroller leg
posts.
Snap the wheels onto the axles by
squeezing the metal clips on the
outside of the wheels, pushing the
wheels onto the axles, and then
releasing the clips so they lock over
the ends of the axles. Gently tug on
each wheel to make sure it’s locked
in place.
STEP 3. SEE PICTURE C.
Slide the frame lock on the side of
the stroller down over the metal
frame post.
PICTURE B
PICTURE A
TOASSEMBLE THE
MODEL #09923 STROLLER:

2.0/0309/HF
STEP 4. SEE PICTURE D.
Slide and snap the ends of the
canopy connectors into the canopy
brackets on the stroller frame.
STEP 5. SEE PICTURE E.
Adjust the handle height by
pressing the buttons on either side
and pushing up or down.
STEP 6. SEE PICTURE F.
To fold the stroller, release the lock
from Step 3 and pull up on the
frame buckle, then fold the stroller
frame forward. When unfolding the
stroller, make sure both of these
locks are secured to prevent
accidental folding during play.
STEP 7. SEE PICTURE G.
Canopy and seatbacks can be
adjusted to your liking anytime
before and during play.
PICTURE E
PICTURE F
PICTURE G
Page 4 of 4
PICTURE D