BAFANG C961 User manual

Manual
C961

Contents
Material &color······················································3
Functions &buttons·······················································3
Functions······························································3
Interface······························································· 4
ON/OFF······························································· 5
The display switches off automatically if there is no activity
for ten minutes (default).·········································· 5
Walking assist························································6
Backlight·······························································6
Battery Capacity·····················································7
TRIP Reset··························································· 7
Error codes··························································· 8
Preparation··························································· 9
Unit······························································· 9
Press tosaveandgotosetspeed.
···················9
Setting the speed limit····································· 10
Warranty··································································· 13
Error Codes:······························································ 16

‐2‐
Dear Customer,
Please read this manual before using the C961 Display.
Thank you,
Suzhou Bafang Electric Motor Science-Technology Co., LTD
Tel: [phone]
Fax: [phone]
E-mail: [email protected]
Address:No. 9 Heshun Rd,
Suzhou Industrial Park,
215122, Suzhou China
Website: www.szbaf.com

‐3‐
Appearance and size
Material &color
The C961 display is made of ABS and is designed to
perform well under -20º to 60 º C.
Available colors: Black, White.
Size (Unit: mm)
Functions & buttons
Functions
The C961 offers many functions for your riding pleasure.
These Include:
Multiple Power levels settings (Mode)
Remaining Battery Capacity
Speed (Speed/ MAX/AVG)

‐4‐
Distance and Odometer (TRIP/ TOTAL)
Time
Assist walking (slow speed motor assist)
Backlight
Error codes
Interface
Button
C961 includes a three button control electronic switch:
 Power on/off


Powe
r
Mode
Level
Walkin
g
Time
S
p
eed
Unit
Distance
Unit
TRIPODO

‐5‐
Caution: Do not plug in or unplug this display when the
power to the unit is on.
A
void collisions
Protect the display’s membrane to provide water
resistant performance.
Do not attempt to reset parameters if the display
is not working.
Call for service if the C961 display is not working
Installation
Install the display and button control on the handlebar and
adjust its location. Plug it into the controller with power off.
ON/OFF
To turn the unit on, press and hold the  button to start the
display. A long press again
 will switch it off.
The display switches off automatically if there is no
activity for ten minutes (default).

‐6‐
Walking assist
Press and hold

to start the walking assist.
Y
ou will
see the walking icon on the display and the motor will move
the bicycle or vehicle at 6km/h.
This function is designed for walking alongside
only. Please do not use this function when riding.
Backlight
Press and hold  to turn on the C961’s backlight screen. If a
front light is configured as well, this will switch it on as well if
front light available. Press and hold
 again to switch it off.
Note: The automatic backlight is available only if the
controller (or built-in controller) offers this function.
If the controller has a light sensor inside of it, the back
light & front light will switch on automatically according
to the level of darkness. The automatic function is off
when the display is in manual mode.

‐7‐
Power Level
The display is integrated with the controller to provide
several levels of power. Press
 or  to change the levels.
The Default range is 0 - 3, where 0 means no output, and 3
means maximum output. The default switch-on is level 1.
Battery Capacity
Four sections highlights when battery is full.
Percentage of capacity for sections:
<20% 20%-40% 40%-60% 60%-80% 80%-100%
The battery icon flashes at 1 Hz when low power.
Distance (trip and odometer)
Press

to shift between TRIP and TOTAL (Odometer).
TRIP Reset
With the power on, Press and hold both

and

to clear
TRIP distance.

‐8‐
Error codes
When something goes wrong with system, an error code will
flash on the display. Check details on attached list.
The motor will stop working in the event of an error.
Only when the error is gone, will the motor work again.

‐9‐
Display Settings
Preparation
Makes sure the connections are good, then power on.
Setting
Press and hold  to turn on the display. Press and hold the
 and  to set the mode.
UnitPress
 to change unit Km or Mile.
Press
 to save and go to set speed.