Baja SSR200 Manual

1
1. Remove cardboard carton from
metal frame and bolts from metal
frame.
E - REV - A
Set-up Instructions SSR200
2. Remove bolts and bracket holding
front wheel to frame.
3. Remove bolts and bracket holding
rear wheel to frame

2
Removal from crate
4. Remove bolts and bracket holding
the top of the handlebar to the metal
frame.
5. Attach kickstand 6. Assemble front brake
lever and handlerbar.
7. Attach gear shift lever
8. Remove packaging
straps and attach the pedals

3
Hardware, assembly parts and tool kit
Handlebar bolts
Handlebar brackets
Front fender bolts
Front fender grommets
Front fender hardware
Plastic straps

4
Handlebar assembly
9. Attach handlebars using the handlebar brackets
and bolts. Torque to 25Nm (18.5ft.lb.)

5
Front Fender Assembly
10. Insert rubber grommets and metal plate in
holes provided on fender according to photo.
11. Attach fender to front forks using 3 fender bolts
in hardware box

6
Battery installation
12. Refer to battery section of owners manual
for correct installation and charging of battery

7
Gas Cap
14. Fill gas tank as specied
in owners manual.
Gas and Oil
13. Fill engine with correct amount of oil and rear gear
case with correct amount of gear oil. Refer to owners
manual for oil types and quantity.
15. Refer to owners manual for proper
starting instuctions
Oil Cap