Dear Customer,
Congratulations on choosing “Boxer BM 100” motorcycle, one of the finest motorcycles in
the country brought to you by Bajaj Auto Limited.
Before you prepare for riding, please read this User's Guide carefully to familiarize yourself
with the mechanism and the controls of the vehicle.
To maintain your bike in perfect running condition to deliver consistent performance, we
earnestly advise you to avail periodic services, at Bajaj Dealers.
You can entrust Bajaj Dealers, who are well equipped with all necessary facilities, skill sets
and trained manpower for servicing and repairs of your “Boxer BM 100”. In the rare event
of going to a local garage, always insist on Genuine Bajaj Spares to ensure safety,
performance and longer life of your vehicle.
Should you require any additional information, please approach Bajaj Dealers. If necessary,
you may also write to selling dealers, with relevant details like Registration no. Chassis no.,
Engine no., Date of purchase, Kms. run, name of selling dealer and your contact numbers.
Finally, may we request you to give your motorcycle a proper care and regular maintenance,
as described in this manual. We are sure this will offer you a long trouble-free ownership
experience.
Wishing you unlimited miles of happiness!
International Marketing
BAJAJ AUTO LIMITED
Akurdi Pune - 411 035 India
Non-use maintenance is necessary if a vehicle
remains off road for a longer duration (more
than 15 days**). The correct and careful non-
use maintenance carried out before storing the
vehicle will prevent the vehicle from rusting
and from such other non-operational damages
like fire hazards.
• Clean the entire vehicle thoroughly.
• Empty the fuel from the fuel tank and
carburettor float bowl (if fuel is left in for a
longer time, the fuel will break and gummy
substance could clog the carburettor).
• Remove the spark plug and put several
drops of 2T oil into the cylinder. Kick the
engine over slowly a few times to coat the
cylinder wall with oil and install back the
spark plug.
• Set the vehicle on a box or a stand so
that both the wheels are raised off the
ground.
• Spray oil on all unpainted metal surfaces
to prevent rusting. Avoid getting oil on
rubber parts or brake liners.
• Lubricate the control cables.
DOC. No. 71111206
Foreword Non-Use Maintenance
• Cover the entire vehicle neatly. Make sure
that the storage area is well ventilated and
free from any source of flames or spark.
Preparation for regular use after storage :
• Clean the vehicle
• Make sure the spark plug is tight.
• Fill the fuel tank with fuel.
• Change the engine oil.
• Check all the points listed in the Daily
Safety Checks section.
• Check and inflate tyres to the proper tyre
pressure.
** For Battery:
a. Remo ve battery a nd keep it on
wooden plank, in properly ventilated
area.
b. Before taking the vehicle for use.
• Get the battery recharged from the
Authorised Service Center / Battery
Dealer.
• Check and correct electrolyte level
& apply petroleum jelly on terminals
(applicable to certain models). 20
