Bakker Elkhuizen BNEASSDR2 User manual

+
x4
x1
x1 x1
A B C
D
ab
c
Technical Data Table cover size:
120-505mm
3~15Kg
Loading range
Height adjustment range
Please do not exceed the
maximum WARNING bearing weight
WARN ING
>950mm
>610mm
Accessory Package List
No. No. Part PartPart
Part
No.
No.
TOOLS
ASSEMBLY STEP 1
Attention
Please place the product properly
according to size of it, or it may
harm or cause damage.
Please take the packaging carton apart,
take out the product and place it one the table
Push the keyboard tray connector
into the slot and lock it
ASSEMBLY STEP 2
When removing the keyboard tray,
please open the wrench and remove it.
BNEASSDR2Item No.：Installation guide
Max:
2KG
3-15KG
Max

2
Warning
Please do not put hands near the supporting
bars, as they change during adjusting and
may hurt you.
Based on the actual usage, press the
handle on one side, and adjust the
workstation to the proper height
ASSEMBLY STEP 3
Please make sure all installed equipments
are on the table, and not sticking out of the
edge, or it may harm or cause damage.
Careful
ASSEMBLY STEP 4
1
Cable
Adhesive buckle helps to make the
cables tidy and clean. Please leave
enough length of cable for height
adjustment function, otherwise it
may cause unexpected lost.
ASSEMBLY STEP 5
Careful
Use the cable management
to guide and bundle the cables
Nylon ties
Warning
Please do not put hands near the supporting bars, as
they change during adjusting and may hurt you.
Please make sure all installed equipments
are on the table, and not sticking out of
the edge, or it may harm or cause damage.
Please leave enough length of cable for
height adjustment function, otherwise it
may cause unexpected lost.
Attention
Attention
Please first adjust it to the highest,
then remove equipment to avoid
harm or damage.
Attention
Please move it by two persons, or
parts may collide and cause damage.
Attention
Please put the devices onto the
top of the workstation.