1/8
TANAGER LUMINAIRE INSTALLATION GUIDE
INSIDE THE BOX:
WARNING
Surface mounting Cable mounting
NEEDED FOR MOUNTING:
www.baltled.com
8th November, 2019
© 2019, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.
3-phase track mounting
/ 1060 / 1560 145.5 81 / 138* /131.5**
* With 3-phase track mounting
** With cable mounting
•Properly ground electrical enclosure.
•Perform installation in dry location only.
•Luminaire may fall down if not installed properly.
•Avoid direct eye exposure to the light source while it is on.
•For indoor use only.
•Do not operate luminaire with damaged parts.
•To prevent wiring damage or abrasion, do not expose wiring to
edges of sheet metal or other sharp objects.
•The manufacturer shall not be liable for any damage
resulting from inappropriate modifications to the
luminaire or faulty installation.
If you have any questions, contact the manufacturer.
! Turn power off before inspection, installation or removal.