Banana Bike LT Series User manual

www.banana-bike.com 1
Thank you for choosing Banana Bike. A Banana Bike is a fantastic first bike and a great way for your
child to learn the basics of biking, learning to balance and steer whilst having massive fun!
For full instructions, please visit: http://www.banana-bike.com/instructions
Attach the Forks & Handlebars to the Frame
AB
C
DE
F
G
H
I
J
A & B –Bearings (Pair)
C –Flat Plastic Washer
D –Domed Plastic Washer
E –Forks
F –Handlebars
G –Aluminium Hex Clamp
H –Seat & Seat Post Unit
I –Spanner
J –Hex Key
K –Aluminium Hex Clamp
L –Frame
M - Wheels
KL
E
C A
B
D
1. Lay the forks and frame on the floor
2. Slide the flat plastic washer (C) over
the fork shaft (E)
3. Slide the bearings (A & B) into the
frame head tube
4. Slide the forks through the bearings
and frame head tube
5. Slide the domed bearing (D) over the
forks to rest on the top of the
bearing (B)
2
3
D
B
A
C
4
5
6. Slide the aluminium hex clamp(G)
over the fork shaft
7. Slide the handlebars (F) into the fork
shaft
8. Applying a small amount of
downwards pressure to the hex
clamp (G), tighten the hex clamp (G),
using the hex tool (J) until it starts to
grip the forks and handlebars
9. Then ensure the forks and
handlebars are parallel
10. Fully tighten the aluminium hex
clamp (Important!)
11. The handlebars and forks should now
be fully joined and have a smooth
turning action
F
GG
6
8
M
ABC D
E
7

www.banana-bike.com 2
Attach the Wheels to the Frame
1. IMPORTANT! Before riding, please check that the seat, wheels and handlebars are tight and
secure, failure to do so could result in an accident.
2. Adult assembly required.
3. For the child’s personal safety, always use safety equipment such as Helmet, Elbow pads,
Knee Pads, and Gloves. Always wear shoes when riding.
4. Don’t transport passengers. Ride on smooth paved flat surfaces without any traffic. Not for
use on public roads.
5. Do not ride at dusk, at night, or at times of limited visibility and unfit weather.
6. Replace worn or broken parts immediately.
Stay Safe
International
DE - Eine ausführliche
Anleitung finden Sie
unter:
12. Turn the bike over with the handlebars on the floor
13. To fit the front wheel, remove the dome nut (O) and
hooked safety clip (N) from each end of the axle.
14. Slide the axle into place between the forks
15. The spacers (P) and inner nuts (R) sit between the wheel
bearing and the forks
16. Slide a hooked safety clip (N) over each end of the axle and
hook them through the hole in the frame.
17. Fully tighten the dome nuts (O) (Important!).
18. Repeat with rear wheel
19. Regularly check that the dome nuts are tight. (Important!)
http://www.banana-bike.com/instructions
FR - Pour des
instructions complètes
s'il vous plaît visitez:
ES - Para obtener
instrucciones
completas, visite:
IT - Per le istruzioni
complete , visitare il
sito:
N O
14
16
Fit the Seat
19. Place the bike on its wheels
20. Gently slide the aluminium hex clamp (K) over the
top of frame
21. Slide the seat post into the frame until the seat is
at the required height. Please note the post
minimum insertion mark
22. Partially tighten the clamp until the frame & clamp
starts to grip the seat post
23. Ensure the seat is aligned with the frame
24. Fully tighten the hex clamp so that the seat post is
fully secured (Important!)
Congratulations! The bike is now ready to ride, this is where the fun starts!
If you have any questions, issues or feedback please email us at:
[e-mail] or visit http://www.banana-bike.com/contact
20
K
21
22
P R