TAUBIK SOHO 2.0 User manual

SOHO 2.0
User Manual

1
Thank you for choosing and purchasing our E-Bike. For your
driving safety, please read this manual carefully to ensure that you can
follow the correct instructions, safety warnings and precautions before
using it.
l Strictly abide by local laws and regulations and traffic laws. The
company is not responsible for any consequences caused by violation
of the above laws and regulations.
l Strictly follow the instructions in the manual for corresponding
operations. The company is not responsible for any consequences
caused by improper use, speeding, overloading etc...
l Do not use this E-Bike to do stunts, it will increase the probability of
injury and damage to the E-Bike.
l Please always wear a helmet.
l Do not leave the battery near fire or heat sources.
l Please regularly check whether the brake performance is good.
l Please do not modify, repair or disassemble the product on your own.
l Do not sit on the product either when driving or stationary.
l Avoid using used, defective and/or aftermarket batteries.
l People who should not ride the product include:
i. Anyone under the influence of alcohol or drugs.
ii. Anyone who suffers from disease that puts them at risk if they
engage in strenuous physical activity.
iii. Anyone who has problems with balance or with motor skills that
would interfere with their ability to maintain balance.
iv. Anyone whose weight is outside the stated limits (see
Specifications).
v. Pregnant women.
SAFETY INSTRUCTIONS

2
Model
SOHO 2.0
Max Load
120KG
Motor
500W/48V
Battery
10Ah
Suspension
Front spring suspension
Max Speed
32km/h
Derailleur
Rear: Shimano 7
Max Distance
40km (Pure Power)
Max Distance
70-110km (Pedal assist）
Sensor
Speed Sensor
Frame
Aluminum
Brake Type
Disc brake
Tire Size
27.5” X 2.1”
Tire Pressure
Min: O psi Max:65 psi
Charger
48V/2A
Charge Time
6 hours
Fork
Single Suspension fork
Net Weight
26.4kg
SPECIFICATIONS

3
PARTS DIAGRAMS
Features & Parts
1. Handlebar
2. Brake Lever
3. Stem
4. Battery
5. Wheel
6. Fork
7. Disc Brake
8. Rim
9. Pedal
10. Rear Derailleur
11. Seat Stem
12. Saddle

4
1. Left grip
2. Left brake lever
3. Color LCD Display
4. Bell
5. Gear shifter
6. Right brake lever
7. Right grip

5
DISPLAY PANEL
①
⑧
③
④
⑦
⑤
⑤
⑤
⑥
1） Real-Time clock
2） Bluetooth connection
3） Headlight indicator
4） Voltage indication
5） Power output by motor
6) Subtotal mileage
7) Speedometer
8) Battery indicator
②

6
No.
Function
Operation Method
1
Power on / off
Press 5 seconds
2
PSA Level
Press the ‘up button’ speed +1,
Press the ‘down button’ speed -1
3
Switch Mph & Km/h
Long Press ‘M’to enter setting interface
4
Switch
ODO,Trip,VOL,CUR,RM,TM
Long Press ‘ M’to show data clearance
window
5
Walk
（
Pedestrian mode)
Long Press Button when walking
6
Turn on/off headlight
Press 3 seconds
DISPLAY BUTTON

7
Only use the provided charging cable to charge your SOHO 2.0 battery pack.
Using any other unauthorized charger may cause damage to your battery pack
and/or.
CHARGING THE BATTCRY RACK
• Ensure the EBIKE is turned off.
• Remove the battery pack from the battery dock.
• Ensure that the charging port is clean and dry.
• Make sure that there is no dust, debris or dirt inside the port.
• Plug the charger into a grounded wall outlet.
• The charging indicator light ON ,the charger will be green.
• Connect the cable with the power supply (100V~240V; 50/60 Hz).
• Align and connect the 1-pin charging cable into the charging port of the
battery pack.
DO NOT FORCE OR BEND THE CHARGING CABE INTO THE
CHARGING PORT, AS IT MAY CAUSE THE PRONG TO BEND OR BREAK.
CHARGING
CAUTION

8
FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY
PRECAUTIONS CAN AND MAY LEAD TO DAMAGE TO YOUR DEVICE, VOID
YOUR MANUEACIURER WARRANTY
；
LEAD TO PROPERIY DAMAGE,
CAUSE SERIOUS BODIIY INJURY, AND CAN LEAD TO DEATH.
OPERATING CONDITIONS
Any SOHO 2.0 that does not work properly can cause you to
lose control and fall. Inspect the entire device thoroughly before
every ride, and do not ride it until any problems have been
corrected.
KICKSTAND
Never ride your EBIKE with the kickstand down.
OPERATING YOUR Ebike
Make sure the battery pack is fully charged before the first Initial use. Before
turning on your E-bike, sit on it like a standard bicycle to get comfortable with
the device before using It with the motor.
GEARS
Your Ebike is equipped with 5 gears. The lowest gear (1) is for easier and uphill
pedaling, and the highest gear (5) is for maximum speed on level or downhill
terrain. Change gears only while pedaling.
The rear wheel contains 5 chain sprockets. When the chain is around the
largest sprocket you are in 1st gear, or the lowest gear. When the chain is
around the smallest sprocket, you are in 5th gear, or the highest gear.

9
PROBLEM
POSSIBLE CAUSES
SOLUTION
Error 1
throttle doesn't turn back to
initial position
Check if the throttle turned
back
Error 2
throttle failure
Check throttle
Error 3
overvoltage protection
Check battery voltage
Error 4
failure of motor's hall signal
wire
Check motor
Error 5
failure of motor's phase wire
Check motor
Error 6
failure of the motor's
temperature sensor
Check controller
Error 7
failure of the current sensor
Check controller
Error 8
failure of the temperature of the
battery
Check battery
Error 9
Controller temperature is too
high, and reaches the
protection point
Check motor
Error 10
failure of the speed sensor
Check the install position
of
the speed sensor
Error 11
Failure of BMS communication
Change battery
Error 12
communication failure
Check connector to
controller
TROUBLE SHOOTING
The above table is only meant to act as a guide to help you figure out any
problems you may have with your EBIKE. If you are unable to get your EBIKE
to operate properly, please ask for support.
[email protected]