B&R Industrial Automation GmbH 2200 Series User manual

Panel PC 2200
built-in devices
User's manual
Version: 1.05 (December 2018)
Model no.: MAPPC2200-ENG
Translation of the original documentation
All values in this manual are current as of its creation. We reserve the right to change the contents of this manual
without notice. B&R Industrial Automation GmbH is not liable for technical or editorial errors and defects in this
manual. In addition, B&R Industrial Automation GmbH assumes no liability for damages that are directly or indirectly
attributable to the delivery, performance or use of this material. We point out that the software and hardware
designations and brand names of the respective companies used in this document are subject to general trademark,
brand or patent protection.

Table of contents
2 Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation
1 General information.................................................................................................. 7
1.1 Manual history.................................................................................................................................................7
1.2 Safety guidelines.............................................................................................................................................8
1.2.1 Intended use..............................................................................................................................................8
1.2.2 Protection against electrostatic discharge.................................................................................................8
1.2.2.1 Packaging.............................................................................................................................................8
1.2.2.2 Regulations for proper ESD handling..................................................................................................8
1.2.3 Regulations and measures........................................................................................................................8
1.2.4 Transport and storage...............................................................................................................................9
1.2.5 Installation..................................................................................................................................................9
1.2.6 Operation................................................................................................................................................... 9
1.2.6.1 Protection against contact with electrical parts................................................................................... 9
1.2.6.2 Ambient conditions - Dust, moisture, aggressive gases......................................................................9
1.2.6.3 Programs, viruses and malicious programs...................................................................................... 10
1.2.7 Environmentally friendly disposal............................................................................................................ 10
1.2.7.1 Separation of materials......................................................................................................................10
1.2.8 Security concept...................................................................................................................................... 10
1.2.9 Third-party updates................................................................................................................................. 10
1.2.10 Administrator accounts.......................................................................................................................... 10
1.3 Organization of notices................................................................................................................................. 11
1.4 Guidelines......................................................................................................................................................11
1.5 Overview........................................................................................................................................................12
2 Technical data......................................................................................................... 14
2.1 Introduction....................................................................................................................................................14
2.1.1 Information about this user's manual...................................................................................................... 14
2.1.2 Description of individual modules............................................................................................................14
2.1.2.1 AP9x3 panels..................................................................................................................................... 14
2.1.2.2 AP1000 panels...................................................................................................................................14
2.1.2.3 System units.......................................................................................................................................15
2.1.3 Design/Configuration............................................................................................................................... 16
2.1.3.1 Configuration...................................................................................................................................... 16
2.2 Complete system.......................................................................................................................................... 18
2.2.1 Mechanical properties..............................................................................................................................18
2.2.1.1 Dimensions.........................................................................................................................................18
2.2.1.2 Installation diagrams.......................................................................................................................... 21
2.2.1.3 Spacing for air circulation.................................................................................................................. 24
2.2.1.4 Mounting orientations.........................................................................................................................25
2.2.1.5 Weight specifications......................................................................................................................... 26
2.2.2 Environmental properties.........................................................................................................................27
2.2.2.1 Temperature specifications................................................................................................................ 27
2.2.2.2 Relative humidity................................................................................................................................34
2.2.2.3 Vibration............................................................................................................................................. 35
2.2.2.4 Shock..................................................................................................................................................35
2.2.2.5 Degree of protection.......................................................................................................................... 35
2.2.3 Electrical properties................................................................................................................................. 36
2.2.3.1 +24 VDC power supply......................................................................................................................36
2.2.3.2 Power calculation...............................................................................................................................37
2.2.3.3 Block diagrams...................................................................................................................................39
2.2.4 Product information................................................................................................................................. 42
2.2.4.1 Identification....................................................................................................................................... 42
2.2.5 Device interfaces and slots..................................................................................................................... 43
2.2.5.1 Device interfaces - Overview.............................................................................................................43
2.2.5.2 +24 VDC power supply......................................................................................................................44
2.2.5.3 Ethernet 1 interface (ETH1)...............................................................................................................45
2.2.5.4 Ethernet 2 interface (ETH2)...............................................................................................................45
2.2.5.5 USB interfaces................................................................................................................................... 46

Table of contents
Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation 3
2.2.5.6 CFast slot........................................................................................................................................... 47
2.2.5.7 Power button...................................................................................................................................... 48
2.2.5.8 Reset button.......................................................................................................................................48
2.2.5.9 LED status indicators.........................................................................................................................49
2.2.5.10 Battery compartment........................................................................................................................50
2.2.5.11 IF option slot.................................................................................................................................... 51
2.2.5.12 Trusted Platform Module (TPM)...................................................................................................... 52
2.2.6 Features of AP1000 panels.................................................................................................................... 53
2.2.6.1 Slide-in labels.....................................................................................................................................53
2.2.6.2 Key and LED configuration................................................................................................................54
2.2.6.3 USB interface..................................................................................................................................... 58
2.2.7 Installation compatibility...........................................................................................................................59
2.2.7.1 Compatibility overview....................................................................................................................... 59
2.2.7.2 Compatibility details........................................................................................................................... 60
2.3 Individual components.................................................................................................................................. 69
2.3.1 AP9x3 panels.......................................................................................................................................... 69
2.3.1.1 5AP923.1215-00.................................................................................................................................69
2.3.1.2 5AP923.1505-00.................................................................................................................................71
2.3.1.3 5AP923.1906-00.................................................................................................................................74
2.3.1.4 5AP933.156B-00................................................................................................................................ 77
2.3.1.5 5AP933.185B-00................................................................................................................................ 80
2.3.1.6 5AP933.215C-00................................................................................................................................83
2.3.1.7 5AP933.240C-00................................................................................................................................86
2.3.2 AP1000 panels........................................................................................................................................ 89
2.3.2.1 5AP1120.0573-000.............................................................................................................................89
2.3.2.2 5AP1151.0573-000.............................................................................................................................92
2.3.2.3 5AP1120.0702-000.............................................................................................................................95
2.3.2.4 5AP1130.0702-000.............................................................................................................................97
2.3.2.5 5AP1120.101E-000............................................................................................................................ 99
2.3.2.6 5AP1130.101E-000.......................................................................................................................... 101
2.3.2.7 5AP1120.1043-000...........................................................................................................................103
2.3.2.8 5AP1180.1043-000...........................................................................................................................106
2.3.2.9 5AP1181.1043-000...........................................................................................................................109
2.3.2.10 5AP1182.1043-000.........................................................................................................................112
2.3.2.11 5AP1120.1214-000......................................................................................................................... 115
2.3.2.12 5AP1120.121E-000........................................................................................................................ 118
2.3.2.13 5AP1130.121E-000........................................................................................................................ 120
2.3.2.14 5AP1120.1505-000.........................................................................................................................122
2.3.2.15 5AP1180.1505-000.........................................................................................................................125
2.3.2.16 5AP1181.1505-000.........................................................................................................................128
2.3.2.17 5AP1120.156B-000........................................................................................................................ 131
2.3.2.18 5AP1130.156C-000........................................................................................................................ 133
2.3.2.19 5AP1130.185C-000........................................................................................................................ 136
2.3.2.20 5AP1120.1906-000.........................................................................................................................138
2.3.3 System units.......................................................................................................................................... 141
2.3.3.1 5PPC2200.ALxx-000........................................................................................................................ 141
2.3.4 CFast cards........................................................................................................................................... 144
2.3.4.1 General information..........................................................................................................................144
2.3.4.2 Basic information..............................................................................................................................144
2.3.4.3 5CFAST.xxxx-00...............................................................................................................................146
2.3.4.4 5CFAST.xxxx-10...............................................................................................................................150
2.3.5 Interface options.................................................................................................................................... 153
2.3.5.1 5ACCIF01.FPCC-000.......................................................................................................................153
2.3.5.2 5ACCIF01.FPCS-000....................................................................................................................... 161
2.3.5.3 5ACCIF01.FPLK-000........................................................................................................................168
2.3.5.4 5ACCIF01.FPLS-000........................................................................................................................173
2.3.5.5 5ACCIF01.FPLS-001........................................................................................................................178

Table of contents
4 Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation
2.3.5.6 5ACCIF01.FPSC-000....................................................................................................................... 183
2.3.5.7 5ACCIF01.FPSC-001....................................................................................................................... 190
2.3.5.8 5ACCIF01.FSS0-000........................................................................................................................197
2.3.5.9 5ACCIF01.ICAN-000........................................................................................................................ 202
2.3.5.10 5ACCIF03.CETH-000.....................................................................................................................205
2.3.6 Battery compartment............................................................................................................................. 207
2.3.6.1 5ACCBT01.0000-001....................................................................................................................... 207
3 Commissioning......................................................................................................208
3.1 Installation................................................................................................................................................... 208
3.1.1 Important information for installation/commissioning............................................................................ 208
3.1.2 Installing a Panel PC with an AP9x3 panel.......................................................................................... 210
3.1.3 Installing the Automation Panel 1000 with retaining clips.....................................................................212
3.1.4 Installing the Automation Panel 1000 with clamping blocks................................................................. 214
3.1.5 Installation information for separate shipments.....................................................................................216
3.1.6 Replacing the system unit.....................................................................................................................216
3.2 Connecting to the power grid..................................................................................................................... 217
3.2.1 Installing the DC power cable............................................................................................................... 217
3.2.1.1 Wiring............................................................................................................................................... 217
3.2.2 Connecting the power supply to a B&R device.................................................................................... 218
3.2.3 Functional ground grounding concept...................................................................................................219
3.3 Connecting cables.......................................................................................................................................220
3.4 Switching on the device for the first time................................................................................................... 221
3.4.1 General information before switching on the device.............................................................................221
3.4.2 Switching on the device........................................................................................................................ 221
3.5 General instructions for the temperature test procedure............................................................................222
3.5.1 Procedure.............................................................................................................................................. 222
3.5.2 Evaluating temperatures in Windows operating systems......................................................................222
3.5.2.1 Evaluating with the B&R Control Center......................................................................................... 222
3.5.2.2 Evaluation with BurnInTest from PassMark.....................................................................................223
3.5.3 Evaluating temperatures in non-Windows operating systems.............................................................. 225
3.5.4 Evaluating the measurement results.....................................................................................................225
3.6 Touch screen calibration............................................................................................................................. 226
3.6.1 Single-touch (analog resistive).............................................................................................................. 226
3.6.1.1 Windows 10 IoT Enterprise 2016 LTSB.......................................................................................... 226
3.6.2 Multi-touch (projected capacitive - PCT)...............................................................................................226
3.6.2.1 Windows 10 IoT Enterprise 2016 LTSB.......................................................................................... 226
3.7 Adjusting the display brightness................................................................................................................. 227
3.8 Known problems / Characteristics.............................................................................................................. 228
4 Software................................................................................................................. 229
4.1 UEFI BIOS options..................................................................................................................................... 229
4.1.1 General information............................................................................................................................... 229
4.1.1.1 Adaptation for touch operation........................................................................................................ 229
4.1.1.2 Overview of BIOS description..........................................................................................................229
4.1.2 UEFI BIOS setup and start procedure..................................................................................................231
4.1.3 Boot menu............................................................................................................................................. 232
4.1.4 Boot manager........................................................................................................................................ 233
4.1.5 Device manager.................................................................................................................................... 234
4.1.6 Setup utility............................................................................................................................................ 235
4.1.6.1 Main..................................................................................................................................................236
4.1.6.2 Advanced..........................................................................................................................................237
4.1.6.3 Security.............................................................................................................................................247
4.1.6.4 Power............................................................................................................................................... 248
4.1.6.5 Boot.................................................................................................................................................. 250
4.1.6.6 Exit....................................................................................................................................................253
4.2 Upgrade information....................................................................................................................................254

Table of contents
Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation 5
4.2.1 UEFI BIOS upgrade.............................................................................................................................. 254
4.2.1.1 UEFI BIOS - What do I need to know?...........................................................................................254
4.2.1.2 Procedure in the EFI shell...............................................................................................................255
4.2.2 Firmware upgrade - Panel PC 2200..................................................................................................... 255
4.2.2.1 Procedure in Windows (B&R Control Center)................................................................................. 255
4.2.2.2 Procedure in the EFI shell...............................................................................................................256
4.2.2.3 Automatic firmware update.............................................................................................................. 257
4.3 Multi-touch drivers.......................................................................................................................................257
4.4 Windows 10 IoT Enterprise 2016 LTSB..................................................................................................... 259
4.4.1 General information............................................................................................................................... 259
4.4.2 Order data............................................................................................................................................. 259
4.4.3 Overview................................................................................................................................................ 259
4.4.4 Features.................................................................................................................................................259
4.4.5 Installation..............................................................................................................................................259
4.4.6 Drivers....................................................................................................................................................260
4.4.7 Activation............................................................................................................................................... 260
4.4.8 Characteristics, limitations..................................................................................................................... 260
4.4.9 Supported display resolutions............................................................................................................... 261
4.5 B&R Linux 9 (GNU/Linux)...........................................................................................................................262
4.5.1 General information............................................................................................................................... 262
4.5.2 Order data............................................................................................................................................. 262
4.5.3 Overview................................................................................................................................................ 262
4.5.4 Features.................................................................................................................................................262
4.5.5 Installation..............................................................................................................................................262
4.5.6 Drivers....................................................................................................................................................263
4.6 B&R Automation Device Interface (ADI) Control Center............................................................................264
4.6.1 Functions............................................................................................................................................... 264
4.6.2 Installation..............................................................................................................................................265
4.7 B&R Automation Device Interface (ADI) Development Kit......................................................................... 266
4.8 B&R Automation Device Interface (ADI) .NET SDK...................................................................................267
4.9 B&R Key Editor...........................................................................................................................................268
4.10 B&R KCF Editor........................................................................................................................................269
4.11 HMI Service Center...................................................................................................................................270
4.11.1 5SWUTI.0001-000................................................................................................................................270
4.11.1.1 General information........................................................................................................................270
4.11.1.2 Order data...................................................................................................................................... 270
5 Standards and certifications................................................................................271
5.1 Directives and declarations.........................................................................................................................271
5.1.1 CE marking............................................................................................................................................271
5.1.2 EMC Directive........................................................................................................................................271
5.2 Certifications................................................................................................................................................272
5.2.1 UL certification.......................................................................................................................................272
5.2.2 EAC........................................................................................................................................................272
5.2.3 KC.......................................................................................................................................................... 272
5.2.4 RCM.......................................................................................................................................................273
6 Accessories........................................................................................................... 274
6.1 General accessories................................................................................................................................... 274
6.1.1 Accessories - Order data...................................................................................................................... 274
6.2 Power supply connectors............................................................................................................................275
6.2.1 0TB103.9x..............................................................................................................................................275
6.2.1.1 General information..........................................................................................................................275
6.2.1.2 Order data........................................................................................................................................ 275
6.2.1.3 Technical data..................................................................................................................................275
6.3 Terminal block for IF options......................................................................................................................276
6.3.1 0TB1210.3100....................................................................................................................................... 276

Table of contents
6 Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation
6.3.1.1 General information..........................................................................................................................276
6.3.1.2 Order data........................................................................................................................................ 276
6.3.1.3 Technical data..................................................................................................................................276
6.4 USB flash drives......................................................................................................................................... 277
6.4.1 5MMUSB.xxxx-01.................................................................................................................................. 277
6.4.1.1 General information..........................................................................................................................277
6.4.1.2 Order data........................................................................................................................................ 277
6.4.1.3 Technical data..................................................................................................................................277
6.4.1.4 Temperature/Humidity diagram........................................................................................................279
6.4.2 5MMUSB.032G-02.................................................................................................................................280
6.4.2.1 General information..........................................................................................................................280
6.4.2.2 Order data........................................................................................................................................ 280
6.4.2.3 Technical data..................................................................................................................................280
6.4.2.4 Temperature/Humidity diagram........................................................................................................281
6.5 Replacement parts...................................................................................................................................... 282
6.5.1 Replacement parts - Order data........................................................................................................... 282
6.5.1.1 5ACCRPC2.0003-000 - Technical data...........................................................................................282
7 Servicing/Maintenance..........................................................................................283
7.1 Cleaning...................................................................................................................................................... 283
7.2 User tips for increasing the service life of the display................................................................................284
7.2.1 Backlight................................................................................................................................................ 284
7.2.1.1 How can the service life of backlights be extended?...................................................................... 284
7.2.2 Image persistence................................................................................................................................. 284
7.2.2.1 What causes image persistence?....................................................................................................284
7.2.2.2 How can image persistence be reduced?....................................................................................... 284
7.3 Pixel errors..................................................................................................................................................284
7.4 Replacing CFast cards............................................................................................................................... 285
7.5 Changing the battery.................................................................................................................................. 286
7.6 Repairs/Complaints and replacement parts................................................................................................287
Appendix A .............................................................................................................. 288
A.1 MTCX.......................................................................................................................................................... 288
A.2 Abbreviations.............................................................................................................................................. 289
A.3 Viewing angles............................................................................................................................................289
A.4 Chemical resistance................................................................................................................................... 290
A.4.1 Autotex panel overlay (polyester)......................................................................................................... 292
A.4.2 Aluminum panel overlay........................................................................................................................293
A.4.3 Coated aluminum front..........................................................................................................................293
A.4.4 Touch screen.........................................................................................................................................294
A.5 Touch screen.............................................................................................................................................. 295
A.5.1 5-wire AMT touch screen (single-touch)...............................................................................................295
A.5.1.1 Technical data................................................................................................................................. 295
A.5.1.2 Temperature/Humidity diagram....................................................................................................... 295
A.5.2 3M touch screen (multi-touch generation 2).........................................................................................296
A.5.2.1 General information......................................................................................................................... 296
A.5.2.2 Technical data................................................................................................................................. 296
A.5.2.3 Temperature/Humidity diagram....................................................................................................... 296
A.5.3 3M touch screen (multi-touch generation 3).........................................................................................297
A.5.3.1 General information......................................................................................................................... 297
A.5.3.2 Technical data................................................................................................................................. 297
A.5.3.3 Temperature/Humidity diagram....................................................................................................... 298

General information
Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation 7
1 General information
Information:
This document is not intended for end customers! The safety guidelines required for end customers
must be incorporated into the operating instructions for end customers in the respective national lan-
guage by the machine manufacturer or system provider.
1.1 Manual history
Version Date Change
1.00 November 2018 •First version
1.05 December 2018 Updated document.

General information
8 Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation
1.2 Safety guidelines
1.2.1 Intended use
Programmable logic controllers, operating and monitoring devices (such as industrial PCs, Power Panels, Mobile
Panels, etc.) as well as the uninterruptible power supply from B&R have been designed, developed and manufac-
tured for normal use in industry. They have not been designed, developed and manufactured for use that involves
fatal risks or hazards that could result in death, injury, serious physical harm or other loss without the assurance of
exceptionally stringent safety precautions. In particular, this includes the use of these systems to monitor nuclear
reactions in nuclear power plants, flight control systems, air traffic control, the control of mass transport vehicles,
medical life support systems and the control of weapon systems.
1.2.2 Protection against electrostatic discharge
Electrical assemblies that can be damaged by electrostatic discharge (ESD) must be handled accordingly.
1.2.2.1 Packaging
•Electrical assemblies with housing
... Do not require special ESD packaging but must be handled properly (see "Electrical assemblies with
housing").
•Electrical assemblies without housing
... Are protected by ESD-suitable packaging.
1.2.2.2 Regulations for proper ESD handling
Electrical assemblies with housing
•Do not touch the connector contacts of connected cables.
•Do not touch the contact tips on circuit boards.
Electrical assemblies without housing
The following applies in addition to "Electrical assemblies with housing":
•All persons handling electrical assemblies and devices in which electrical assemblies are installed must
be grounded.
•Assemblies are only permitted to touched on the narrow sides or front plate.
•Always place assemblies on suitable surfaces (ESD packaging, conductive foam, etc.). Metallic surfaces
are not suitable surfaces!
•Assemblies must not be subjected to electrostatic discharges (e.g. due to charged plastics).
•A minimum distance of 10 cm from monitors or television sets must be maintained.
•Measuring instruments and devices must be grounded.
•Test probes of floating potential measuring instruments must be discharged briefly on suitable grounded
surfaces before measurement.
Individual components
•ESD protective measures for individual components are implemented throughout B&R (conductive floors,
shoes, wrist straps, etc.).
•The increased ESD protective measures for individual components are not required for handling B&R
products at customer locations.
1.2.3 Regulations and measures
Electronic devices are generally not failsafe. If the programmable logic controller, operating or control device or
uninterruptible power supply fails, the user is responsible for ensuring that connected devices, such as motors,
are brought to a safe state.

General information
Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation 9
When using programmable logic controllers as well as when using operating and monitoring devices as control
systems in conjunction with a Soft PLC (e.g. B&R Automation Runtime or similar product) or Slot PLC (e.g. B&R
LS251 or similar product), the safety measures that apply to industrial controllers (protection by protective equip-
ment such as emergency stops, etc.) must be observed in accordance with applicable national and international
regulations. This also applies to all other connected devices, such as drives.
All work such as installation, commissioning and servicing are only permitted to be carried out by qualified person-
nel. Qualified personnel are persons who are familiar with the transport, installation, assembly, commissioning and
operation of the product and have the appropriate qualifications for their job (e.g. IEC 60364). National accident
prevention regulations must be observed.
The safety guidelines, information about connection conditions (nameplate and documentation) and limit values
specified in the technical data must be read carefully before installation and commissioning and must be strictly
observed.
1.2.4 Transport and storage
During transport and storage, devices must be protected against undue stress (mechanical stress, temperature,
humidity, aggressive atmosphere).
1.2.5 Installation
•The devices are not ready for use and must be installed and wired according to the requirements of this
documentation in order to comply with EMC limit values.
•Installation must be carried out according to the documentation using suitable equipment and tools.
•Devices are only permitted to be installed by qualified personnel when the power is switched off. The control
cabinet must first be disconnected from the power supply and secured against being switched on again.
•General safety regulations and national accident prevention regulations must be observed.
•The electrical installation must be carried out in accordance with relevant regulations (e.g. wire cross sec-
tion, fuse protection, protective ground connection).
1.2.6 Operation
1.2.6.1 Protection against contact with electrical parts
In order to operate programmable logic controllers, operating and monitoring devices and the uninterruptible power
supply, it is necessary for certain components to carry dangerous voltages over 42 VDC. Touching one of these
components can result in a life-threatening electric shock. There is a risk of death, serious injury or damage to
property.
Before switching on the programmable logic controllers, operating and monitoring devices and uninterruptible pow-
er supply, it must be ensured that the housing is properly connected to ground potential (PE rail). The ground
connection must also be made if the operating and monitoring device and uninterruptible power supply are only
connected for testing purposes or only operated for a short time!
Before switching on, live parts must be safely covered. All covers must be kept closed during operation.
1.2.6.2 Ambient conditions - Dust, moisture, aggressive gases
The use of operating and monitoring devices (e.g. industrial PCs, Power Panels, Mobile Panels, etc.) and uninter-
ruptible power supplies in dusty environments must be avoided. This can otherwise lead to dust deposits that affect
the functionality of the device, especially in systems with active cooling (fans), which may no longer guarantee
sufficient cooling.
The presence of aggressive gases in the environment can also result in malfunctions. In combination with high
temperature and relative humidity, aggressive gases – for example with sulfur, nitrogen and chlorine components
– trigger chemical processes that can very quickly impair or damage electronic components. Blackened copper
surfaces and cable ends in existing installations are indicators of aggressive gases.
When operated in rooms with dust and condensation that can endanger functionality, operating and monitoring
devices such as Automation Panels or Power Panels are protected on the front against the ingress of dust and
moisture when installed correctly (e.g. cutout installation). The back of all devices must be protected against the
ingress of dust and moisture, however, or the dust deposits must be removed at suitable intervals.

General information
10 Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation
1.2.6.3 Programs, viruses and malicious programs
Any data exchange or installation of software using data storage media (e.g. floppy disk, CD-ROM, USB flash
drive, etc.) or via networks or the Internet poses a potential threat to the system. It is the user's own responsibility to
avert these dangers and to take appropriate measures such as virus protection programs, firewalls, etc. to protect
against them and to use only software from trustworthy sources.
1.2.7 Environmentally friendly disposal
All programmable logic controllers, operating and monitoring devices and uninterruptible power supplies from B&R
are designed to have as little impact on the environment as possible.
1.2.7.1 Separation of materials
To ensure that devices can be recycled in an environmentally friendly manner, it is necessary to separate out the
different materials.
Component Disposal
Programmable logic controllers
Operating and monitoring devices
Uninterruptible power supply
Batteries and accumulators
Cables
Electronics recycling
Cardboard/Paper packaging Paper/Cardboard recycling
Plastic packaging material Plastics recycling
Table 1: Environmentally friendly disposal
Disposal must be carried out in accordance with applicable legal regulations.
1.2.8 Security concept
To secure plants, systems, machines and networks against cyber threats, it is required to implement (and contin-
uously maintain) a holistic security concept that is state of the art. B&R products and solutions are only one com-
ponent of such a concept.
The user is responsible for preventing unauthorized access to plants, systems, machines and networks. Systems,
machines and components should only be connected to the corporate network or Internet if and only to the extent
necessary and if appropriate protective measures (e.g. use of firewalls and network segmentation) have been
taken.
B&R products and solutions are constantly being further developed to make them even more secure. B&R expressly
recommends that updates be performed as soon as the corresponding updates are available and that only current
product versions be used. Using outdated or no longer supported versions can increase the risk of cyber threats.
1.2.9 Third-party updates
This product includes third-party software (drivers, etc.). B&R only assumes warrants for updates/patches to third-
party software if they have been officially released by B&R. Otherwise, updates/patches are performed at your
own risk.
1.2.10 Administrator accounts
A user with administrator rights has extensive options for accessing and manipulating the system.
Therefore, make sure that administrator accounts are adequately secured in order to prevent unauthorized
changes. To do this, use secure passwords and a standard user account for regular operation. Additional measures
such as the use of security policies must be applied as needed.