B&R Industries MAPPC900-ENG User manual

1
Panel PC 900
User's Manual
Version: 1.05 (April 2014)
Model no.: MAPPC900-ENG
All information contained in this manual is current as of its creation/publication. B&R reserves the right to change
the contents of this manual without notice. The information contained herein is believed to be accurate as of
the date of publication; however, Bernecker + Rainer Industrie-Elektronik Ges.m.b.H. makes no warranty, ex-
pressed or implied, with regard to the products or documentation contained within this manual. In addition,
Bernecker + Rainer Industrie-Elektronik Ges.m.b.H. shall not be liable for any incidental or consequential damages
in connection with or arising from the furnishing, performance or use of the product(s) in this documentation. Soft-
ware names, hardware names and trademarks are registered by their respective companies.

2
Chapter 1: General information
Chapter 2: Technical data
Chapter 3: Installation
Chapter 4: Software
Chapter 5: Standards and certifications
Chapter 6: Accessories
Chapter 7: Maintenance and service
Appendix A

Table of contents
Table of contents
Panel PC 900 User's Manual V1.05 3
Chapter 1 General information................................................................................... 9
1 Manual history....................................................................................................................................................9
2 Safety guidelines..............................................................................................................................................10
2.1 Intended use...............................................................................................................................................10
2.2 Protection against electrostatic discharge..................................................................................................10
2.2.1 Packaging..............................................................................................................................................10
2.2.2 Guidelines for proper ESD handling.....................................................................................................10
2.3 Policies and procedures.............................................................................................................................10
2.4 Transport and storage................................................................................................................................ 11
2.5 Installation...................................................................................................................................................11
2.6 Operation.................................................................................................................................................... 11
2.6.1 Protection against touching electrical parts.......................................................................................... 11
2.6.2 Environmental conditions - Dust, humidity, aggressive gases............................................................. 11
2.6.3 Viruses and dangerous programs........................................................................................................ 11
2.7 Environmentally friendly disposal............................................................................................................... 12
2.7.1 Separation of materials.........................................................................................................................12
3 Organization of safety notices......................................................................................................................... 13
4 Guidelines.........................................................................................................................................................13
5 Overview...........................................................................................................................................................14
Chapter 2 Technical data.......................................................................................... 17
1 Introduction.......................................................................................................................................................17
1.1 About this user's manual............................................................................................................................17
1.2 Description of individual modules...............................................................................................................17
1.2.1 Display units..........................................................................................................................................17
1.2.2 CPU board and system unit................................................................................................................. 17
1.3 Structure/Configuration............................................................................................................................... 18
1.3.1 Configuration......................................................................................................................................... 18
2 Complete system............................................................................................................................................. 21
2.1 Mechanical characteristics..........................................................................................................................21
2.1.1 Dimensions............................................................................................................................................21
2.1.2 Installation diagrams............................................................................................................................. 22
2.1.3 Spacing for air circulation..................................................................................................................... 23
2.1.4 Mounting orientations............................................................................................................................24
2.1.5 Weight specifications............................................................................................................................ 25
2.2 Environmental characteristics.....................................................................................................................26
2.2.1 Temperature specifications................................................................................................................... 26
2.2.2 Humidity.................................................................................................................................................32
2.2.3 Vibration................................................................................................................................................ 33
2.2.4 Shock.....................................................................................................................................................33
2.2.5 Protection.............................................................................................................................................. 33
2.3 Electrical characteristics............................................................................................................................. 34
2.3.1 +24 VDC power supply.........................................................................................................................34
2.3.2 Optional Supply voltage VAC............................................................................................................... 34
2.3.3 Power calculation.................................................................................................................................. 35
2.3.4 Block diagram....................................................................................................................................... 37
2.4 Device interfaces and slots........................................................................................................................ 38
2.4.1 Overview of device interfaces...............................................................................................................38
2.4.2 Supply voltage.......................................................................................................................................40
2.4.3 COM1 serial interface........................................................................................................................... 42
2.4.4 COM2 serial interface........................................................................................................................... 42
2.4.5 Monitor/Panel interface......................................................................................................................... 43
2.4.6 Ethernet 1 (ETH1).................................................................................................................................45
2.4.7 Ethernet 2 (ETH2).................................................................................................................................45
2.4.8 USB interfaces...................................................................................................................................... 46
2.4.9 CFast slot.............................................................................................................................................. 47
2.4.10 Audio................................................................................................................................................... 47

Table of contents
4 Panel PC 900 User's Manual V1.05
2.4.11 Status LEDs........................................................................................................................................ 48
2.4.12 Power button.......................................................................................................................................49
2.4.13 Reset button........................................................................................................................................49
2.4.14 Battery................................................................................................................................................. 50
2.4.15 Slide-in compact slot...........................................................................................................................51
2.4.16 Slide-in slot..........................................................................................................................................51
2.4.17 Main memory...................................................................................................................................... 52
2.4.18 IF option 1 slot....................................................................................................................................53
2.4.19 IF option 2 slot....................................................................................................................................53
2.4.20 Card slot (PCI / PCIe)........................................................................................................................ 54
2.5 Serial number sticker..................................................................................................................................55
3 Individual components..................................................................................................................................... 56
3.1 Display units............................................................................................................................................... 56
3.1.1 5AP923.1215-00....................................................................................................................................56
3.1.2 5AP923.1505-00....................................................................................................................................58
3.1.3 5AP923.1906-00....................................................................................................................................60
3.1.4 5AP933.156B-00................................................................................................................................... 62
3.1.5 5AP933.185B-00................................................................................................................................... 64
3.1.6 5AP933.215C-00...................................................................................................................................66
3.1.7 5AP933.240C-00...................................................................................................................................68
3.2 QM77 CPU boards..................................................................................................................................... 70
3.2.1 5PC901.TS77-0x...................................................................................................................................70
3.3 HM76 CPU boards..................................................................................................................................... 73
3.3.1 5PC901.TS77-0x...................................................................................................................................73
3.4 System units............................................................................................................................................... 76
3.4.1 5PC911.SX00-00...................................................................................................................................76
3.4.2 5PC911.SX00-01...................................................................................................................................77
3.5 Main memory..............................................................................................................................................78
3.5.1 5MMDDR.xxxx-03................................................................................................................................. 78
3.6 Bus units.....................................................................................................................................................79
3.6.1 5AC902.BX0x-xx................................................................................................................................... 79
3.7 Fan kit.........................................................................................................................................................81
3.7.1 5AC902.FA00-00...................................................................................................................................81
3.7.2 5AC902.FA0X-00...................................................................................................................................82
3.8 Drives..........................................................................................................................................................83
3.8.1 5AC901.CHDD-01.................................................................................................................................83
3.8.2 5AC901.CSSD-03................................................................................................................................. 85
3.8.3 5AC901.CSSD-04................................................................................................................................. 88
3.8.4 5AC901.CSSD-05................................................................................................................................. 91
3.8.5 5MMSSD.0060-01.................................................................................................................................93
3.8.6 5MMSSD.0128-01.................................................................................................................................96
3.8.7 5MMSSD.0256-00.................................................................................................................................99
3.8.8 5AC901.CCFA-00................................................................................................................................101
3.8.9 5AC901.SDVW-00...............................................................................................................................102
3.8.10 5AC901.SSCA-00..............................................................................................................................104
3.9 Interface options....................................................................................................................................... 105
3.9.1 5AC901.I485-00.................................................................................................................................. 105
3.9.2 5AC901.ICAN-00.................................................................................................................................109
3.9.3 5AC901.ISRM-00................................................................................................................................ 111
3.9.4 5AC901.IHDA-00.................................................................................................................................113
3.9.5 5AC901.IRDY-00.................................................................................................................................115
3.10 Uninterruptible power supply (UPS).......................................................................................................116
3.10.1 Requirements.................................................................................................................................... 116
3.10.2 5AC901.IUPS-00............................................................................................................................... 117
3.10.3 5AC901.IUPS-01............................................................................................................................... 119
3.10.4 5AC901.BUPS-00..............................................................................................................................121
3.10.5 5AC901.BUPS-01..............................................................................................................................125

Table of contents
Table of contents
Panel PC 900 User's Manual V1.05 5
3.10.6 5CAUPS.xxxx-01...............................................................................................................................129
3.11 Power supply.......................................................................................................................................... 131
3.11.1 5AC902.PS00-00...............................................................................................................................131
Chapter 3 Installation...............................................................................................132
1 Installation...................................................................................................................................................... 132
1.1 Installation Panel PC 900.........................................................................................................................132
1.2 Installation information for individual components................................................................................... 134
1.3 Replacing the CPU board and system unit............................................................................................. 135
1.4 Installing or replacing the AC power supply............................................................................................ 137
1.5 Replacing the main memory modules......................................................................................................139
1.6 Installing the interface option................................................................................................................... 141
1.7 Installing and replacing the slide-in compact drive.................................................................................. 144
1.8 Replacing the fan kit................................................................................................................................ 146
1.9 Replacing the fan filter............................................................................................................................. 147
1.10 Installing the bus unit............................................................................................................................. 148
1.11 Installing PCI / PCIe cards..................................................................................................................... 150
1.12 Installing a slide-in drive.........................................................................................................................152
1.13 Installing and connecting the UPS battery unit......................................................................................154
2 Connecting to the power mains.....................................................................................................................155
2.1 Installing the DC mains cable.................................................................................................................. 155
2.1.1 Wiring.................................................................................................................................................. 155
2.2 Installing the AC mains cable.................................................................................................................. 156
2.2.1 Wiring.................................................................................................................................................. 156
2.3 Connecting the power supply to a B&R device....................................................................................... 157
2.4 Grounding concept functional ground...................................................................................................... 158
3 Cable connections..........................................................................................................................................159
4 Switching on for the first time........................................................................................................................160
4.1 General information before switching on................................................................................................. 160
4.2 Switching on the Panel PC...................................................................................................................... 160
5 Touch screen calibration................................................................................................................................ 161
5.1 Single-touch (analog resistive)................................................................................................................. 161
5.1.1 Windows 7 Professional / Ultimate.....................................................................................................161
5.1.2 Windows Embedded Standard 7 Embedded / Premium....................................................................161
5.1.3 Windows XP Professional...................................................................................................................161
5.1.4 Windows Embedded Standard 2009.................................................................................................. 161
5.2 Multi-touch (PCT - Projected capacitive)................................................................................................. 161
5.2.1 Windows 7 Professional / Ultimate.....................................................................................................161
5.2.2 Windows Embedded Standard 7 Premium.........................................................................................161
6 Adjusting the display brightness.................................................................................................................... 162
7 Configuring a SATA RAID set using the internal RAID controller................................................................. 163
7.1 Create RAID volume................................................................................................................................ 164
7.2 Delete RAID volume.................................................................................................................................165
7.3 Reset disks to non-RAID..........................................................................................................................166
7.4 Recovery volume options......................................................................................................................... 167
Chapter 4 Software.................................................................................................. 168
1 BIOS options.................................................................................................................................................. 168
1.1 General information.................................................................................................................................. 168
1.2 BIOS Setup and boot procedure..............................................................................................................168
1.2.1 BIOS Setup keys................................................................................................................................ 169
1.3 Main.......................................................................................................................................................... 170
1.3.1 Platform information............................................................................................................................ 171
1.4 Advanced.................................................................................................................................................. 172
1.4.1 Graphics configuration........................................................................................................................ 173
1.4.2 OEM features......................................................................................................................................175
1.4.3 PCI configuration.................................................................................................................................194

Table of contents
6 Panel PC 900 User's Manual V1.05
1.4.4 PCI Express configuration.................................................................................................................. 196
1.4.5 ACPI settings...................................................................................................................................... 202
1.4.6 RTC wake settings..............................................................................................................................203
1.4.7 CPU configuration............................................................................................................................... 204
1.4.8 Chipset configuration.......................................................................................................................... 207
1.4.9 SATA configuration............................................................................................................................. 208
1.4.10 Memory configuration........................................................................................................................211
1.4.11 USB configuration............................................................................................................................. 214
1.4.12 Serial port console redirection.......................................................................................................... 218
1.5 Boot...........................................................................................................................................................220
1.5.1 Boot device priority............................................................................................................................. 220
1.5.2 Boot configuration............................................................................................................................... 221
1.6 Security..................................................................................................................................................... 222
1.6.1 HDD user password............................................................................................................................223
1.7 Save & Exit...............................................................................................................................................223
1.8 BIOS default settings................................................................................................................................225
1.8.1 Advanced.............................................................................................................................................225
1.8.2 Boot..................................................................................................................................................... 229
1.9 Allocation of resources.............................................................................................................................231
1.9.1 RAM address assignment...................................................................................................................231
1.9.2 I/O address assignment......................................................................................................................231
1.9.3 Interrupt assignments in PIC mode.................................................................................................... 231
1.9.4 Interrupt assignments in APIC mode..................................................................................................232
2 Upgrade information.......................................................................................................................................234
2.1 BIOS upgrade...........................................................................................................................................234
2.1.1 Important information.......................................................................................................................... 234
2.1.2 Procedure with MS-DOS.................................................................................................................... 235
2.2 Firmware upgrade.................................................................................................................................... 236
2.2.1 Procedure............................................................................................................................................236
2.3 Creating an MS-DOS boot diskette in Windows XP................................................................................237
2.4 Creating a bootable USB flash drive for B&R upgrade files.................................................................... 239
2.4.1 Requirements...................................................................................................................................... 239
2.4.2 Procedure............................................................................................................................................239
2.4.3 How to access MS-DOS.....................................................................................................................239
2.5 Creating a bootable mass storage device for B&R upgrade files............................................................240
2.5.1 Requirements...................................................................................................................................... 240
2.5.2 Procedure............................................................................................................................................240
2.5.3 How to access MS-DOS.....................................................................................................................240
3 Windows 7......................................................................................................................................................241
3.1 General information.................................................................................................................................. 241
3.2 Order data................................................................................................................................................ 241
3.3 Overview................................................................................................................................................... 241
3.4 Installation.................................................................................................................................................242
3.5 Drivers.......................................................................................................................................................242
3.6 Special considerations, limitations........................................................................................................... 242
4 Windows Embedded Standard 7................................................................................................................... 243
4.1 General information.................................................................................................................................. 243
4.2 Order data................................................................................................................................................ 243
4.3 Overview................................................................................................................................................... 243
4.4 Features with WES7 (Windows Embedded Standard 7)......................................................................... 243
4.5 Installation.................................................................................................................................................244
4.6 Drivers.......................................................................................................................................................244
4.6.1 Touch screen driver............................................................................................................................ 244
5 Windows XP Professional..............................................................................................................................245
5.1 General information.................................................................................................................................. 245
5.2 Order data................................................................................................................................................ 245
5.3 Overview................................................................................................................................................... 245

Table of contents
Table of contents
Panel PC 900 User's Manual V1.05 7
5.4 Installation.................................................................................................................................................245
5.5 Drivers.......................................................................................................................................................246
6 Windows Embedded Standard 2009............................................................................................................. 247
6.1 General information.................................................................................................................................. 247
6.2 Order data................................................................................................................................................ 247
6.3 Overview................................................................................................................................................... 247
6.4 Features with WES2009 (Windows Embedded Standard 2009)............................................................. 247
6.5 Installation.................................................................................................................................................248
6.6 Drivers.......................................................................................................................................................248
7 Automation Runtime.......................................................................................................................................249
7.1 General information.................................................................................................................................. 249
7.2 Order data................................................................................................................................................ 249
7.3 Automation Runtime Windows (ARwin)................................................................................................... 249
7.4 Automation Runtime Embedded (ARemb)...............................................................................................249
Chapter 5 Standards and certifications................................................................. 251
1 Standards and guidelines.............................................................................................................................. 251
1.1 CE mark....................................................................................................................................................251
1.2 EMC directive........................................................................................................................................... 251
1.3 Low voltage directive................................................................................................................................251
2 Certifications...................................................................................................................................................252
2.1 UL certification..........................................................................................................................................252
2.2 UL Haz. Loc. Certifications...................................................................................................................... 252
2.3 GOST-R.................................................................................................................................................... 252
Chapter 6 Accessories............................................................................................ 253
1 Power connectors.......................................................................................................................................... 253
1.1 0TB103.9x.................................................................................................................................................253
1.1.1 General information.............................................................................................................................253
1.1.2 Order data...........................................................................................................................................253
1.1.3 Technical data.....................................................................................................................................253
1.2 0TB3103.8000.......................................................................................................................................... 254
1.2.1 General information.............................................................................................................................254
1.2.2 Order data...........................................................................................................................................254
1.2.3 Technical data.....................................................................................................................................254
2 Replacement CMOS batteries....................................................................................................................... 255
2.1 0AC201.91 / 4A0006.00-000....................................................................................................................255
2.1.1 General information.............................................................................................................................255
2.1.2 Order data...........................................................................................................................................255
2.1.3 Technical data.....................................................................................................................................255
3 CFast cards....................................................................................................................................................256
3.1 5CFAST.xxxx-00....................................................................................................................................... 256
3.1.1 General information.............................................................................................................................256
3.1.2 Order data...........................................................................................................................................256
3.1.3 Technical data.....................................................................................................................................256
3.1.4 Dimensions..........................................................................................................................................257
3.1.5 Temperature humidity diagram...........................................................................................................258
4 USB flash drives............................................................................................................................................ 259
4.1 5MMUSB.xxxx-01..................................................................................................................................... 259
4.1.1 General information.............................................................................................................................259
4.1.2 Order data...........................................................................................................................................259
4.1.3 Technical data.....................................................................................................................................259
4.1.4 Temperature humidity diagram...........................................................................................................260
5 Cables............................................................................................................................................................ 261
5.1 DVI cables................................................................................................................................................ 261
5.1.1 5CADVI.0xxx-00..................................................................................................................................261
5.2 SDL cables............................................................................................................................................... 264

Table of contents
8 Panel PC 900 User's Manual V1.05
5.2.1 5CASDL.0xxx-00.................................................................................................................................264
5.3 SDL cables with 45° male connector.......................................................................................................267
5.3.1 5CASDL.0xxx-01.................................................................................................................................267
5.4 SDL flex cables........................................................................................................................................ 270
5.4.1 5CASDL.0xxx-03.................................................................................................................................270
5.5 SDL flex cables with extender................................................................................................................. 273
5.5.1 5CASDL.0xx0-13.................................................................................................................................273
5.6 USB cables...............................................................................................................................................277
5.6.1 5CAUSB.00xx-00................................................................................................................................ 277
5.7 RS232 cables........................................................................................................................................... 278
5.7.1 9A0014.xx.......................................................................................................................................... 278
Chapter 7 Maintenance and service.......................................................................280
1 Changing the battery..................................................................................................................................... 280
1.1 Procedure................................................................................................................................................. 280
2 Replacing a CFast card.................................................................................................................................282
3 Cleaning......................................................................................................................................................... 283
4 Tips for extending the service life of the display...........................................................................................284
4.1 Backlight................................................................................................................................................... 284
4.1.1 How can the service life of the backlight be extended?.....................................................................284
4.2 Screen burn-in.......................................................................................................................................... 284
4.2.1 What causes screen burn-in?.............................................................................................................284
4.2.2 How can screen burn-in be avoided?.................................................................................................284
5 Pixel errors..................................................................................................................................................... 284
Appendix A .............................................................................................................. 285
1 Abbreviations..................................................................................................................................................285
2 Viewing angles............................................................................................................................................... 285
3 Chemical resistance.......................................................................................................................................286
3.1 Panel overlay............................................................................................................................................286
3.2 Lacquered aluminum front........................................................................................................................287
3.3 Touch screen............................................................................................................................................ 287
4 Touch screen..................................................................................................................................................288
4.1 Touch screen 5-wire AMT (single-touch)................................................................................................. 288
4.1.1 Technical data.....................................................................................................................................288
4.1.2 Temperature humidity diagram...........................................................................................................288
4.2 3M touch screen (multi-touch)..................................................................................................................289
4.2.1 Technical data.....................................................................................................................................289
4.2.2 Temperature humidity diagram...........................................................................................................289

General information • Manual history
Chapter 1
General information
Panel PC 900 User's Manual V1.05 9
Chapter 1 • General information
1 Manual history
Version Date Change
1.00 19-Dec-13 •First version
1.05 2014-04-16 •Updated section "Maximum ambient temperature during operation" on page 27.
•Updated vibration and shock specifications of the complete system for storage and transport, see page
33.
•Corrected the technical data for ambient temperature and humidity for the following drives:
"5AC901.CSSD-03" on page 85, "5AC901.CSSD-04" on page 88, "5AC901.CSSD-05" on page
91, "5MMSSD.0060-01" on page 93, "5MMSSD.0128-01" on page 96, "5MMSSD.0256-00" on
page 99.
•Updated ready relay IF option "5AC901.IRDY-00" on page 115.
•Updated service life diagram for the "5AC901.BUPS-00"and "5AC901.BUPS-01" battery units.
•Updated section "Serial number sticker" on page 55.
•Updated section "Installation information for individual components" on page 134.
•Updated section "Chemical resistance" on page 286.
•Updated section "Touch screen" on page 288.
Table 1: Manual history

General information • Safety guidelines
10 Panel PC 900 User's Manual V1.05
2 Safety guidelines
2.1 Intended use
Programmable logic controllers (PLCs), operating/monitoring devices (industrial PCs, Power Panels, Mobile Pan-
els, etc.), and B&R uninterruptible power supplies have been designed, developed and manufactured for conven-
tional use in industrial environments. They were not designed, developed and manufactured for any use involving
serious risks or hazards that could lead to death, injury, serious physical damage or loss of any kind without the
implementation of exceptionally stringent safety precautions. In particular, such risks and hazards include the use
of these devices to monitor nuclear reactions in nuclear power plants, their use in flight control or flight safety sys-
tems as well as in the control of mass transportation systems, medical life support systems or weapons systems.
2.2 Protection against electrostatic discharge
Electrical components that can be damaged by electrostatic discharge (ESD) must be handled accordingly.
2.2.1 Packaging
•Electrical components with a housing
...Do not require special ESD packaging but must be handled properly (see "Electrical components with
a housing").
•Electrical components without a housing
…Must be protected by ESD-suitable packaging.
2.2.2 Guidelines for proper ESD handling
Electrical components with a housing
•Do not touch the connector contacts on connected cables.
•Do not touch the contact tips on circuit boards.
Electrical components without a housing
The following applies in addition to the points listed under "Electrical components with a housing":
•Any persons handling electrical components or devices with installed electrical components must be
grounded.
•Components may only be touched on their narrow sides or front plate.
•Components should always be stored in a suitable medium (ESD packaging, conductive foam, etc.). Metal-
lic surfaces are not suitable storage surfaces!
•Components should not be subjected to electrostatic discharge (e.g. through the use of charged plastics).
•Ensure a minimum distance of 10 cm from monitors and TV sets.
•Measurement devices and equipment must be grounded.
•Measurement probes on potential-free measurement devices must be discharged on sufficiently grounded
surfaces before taking measurements.
Individual components
•ESD protective measures for individual components are thoroughly integrated at B&R (conductive floors,
footwear, arm bands, etc.).
•These increased ESD protective measures for individual components are not necessary for customers
handling B&R products.
2.3 Policies and procedures
Electronic devices are never completely failsafe. If the programmable control system, operating/monitoring device
or uninterruptible power supply fails, the user is responsible for ensuring that other connected devices, e.g. motors,
are brought to a secure state.

General information • Safety guidelines
Chapter 1
General information
Panel PC 900 User's Manual V1.05 11
When using programmable logic controllers or operating/monitoring devices as control systems together with a Soft
PLC (e.g. B&R Automation Runtime or comparable product) or Slot PLC (e.g. B&R LS251 or comparable product),
safety precautions relevant to industrial control systems (e.g. the provision of safety devices such as emergency
stop circuits, etc.) must be observed in accordance with applicable national and international regulations. The same
applies for all other devices connected to the system, such as drives.
All tasks such as the installation, commissioning and servicing of devices are only permitted to be carried out by
qualified personnel. Qualified personnel are those familiar with the transport, mounting, installation, commissioning
and operation of devices who also have the appropriate qualifications (e.g. IEC 60364). National accident preven-
tion regulations must be observed.
The safety notices, connection descriptions (type plate and documentation) and limit values listed in the technical
data are to be read carefully before installation and commissioning and must be observed.
2.4 Transport and storage
During transport and storage, devices must be protected against undue stress (mechanical loads, temperature,
humidity, aggressive atmospheres, etc.).
2.5 Installation
•Installation must be performed according to this documentation using suitable equipment and tools.
•Devices may only be installed by qualified personnel without voltage applied. Before installation, voltage
to the control cabinet must be switched off and prevented from being switched on again.
•General safety guidelines and national accident prevention regulations must be observed.
•Electrical installation must be carried out according to applicable guidelines (e.g. line cross sections, fuses,
protective ground connections).
2.6 Operation
2.6.1 Protection against touching electrical parts
To operate programmable logic controllers, operating/monitoring devices or uninterruptible power supplies, it is
necessary for certain parts to carry dangerous voltage levels over 42 VDC. Touching one of these parts can result
in a life-threatening electric shock. This could lead to death, severe injury or damage to equipment.
Before turning on the programmable logic controller, operating/monitoring devices or the uninterruptible power
supply, the housing must be properly grounded (PE rail). Ground connections must be established even when
testing or operating operating/monitoring devices or the uninterruptible power supply for a short time!
Before turning the device on, all parts that carry voltage must be securely covered. During operation, all covers
must remain closed.
2.6.2 Environmental conditions - Dust, humidity, aggressive gases
The use of operating/monitoring devices (e.g. industrial PCs, Power Panels, Mobile Panels, etc.) and uninterruptible
power supplies in very dusty environments should be avoided. Dust collection on the devices can affect functionality
and may prevent sufficient cooling, especially in systems with active cooling systems (fans).
The presence of aggressive gases can also lead to malfunctions. When combined with high temperature and
humidity, aggressive gases – e.g. with sulfur, nitrogen and chlorine components – can induce chemical reactions
that can damage electronic components very quickly. Signs of the presence of aggressive gases are blackened
copper surfaces and cable ends on existing equipment.
For operation in dusty or humid conditions, correctly installed (e.g. cutout installations) operating/monitoring devices
like the Automation Panel or Power Panel are protected on the front. The back of all devices must be protected
from dust and humidity and cleaned at suitable intervals.
2.6.3 Viruses and dangerous programs
This system is subject to potential risk each time data is exchanged or software is installed from a data medium
(e.g. diskette, CD-ROM, USB flash drive, etc.), a network connection or the Internet. The user is responsible for
assessing these dangers, implementing preventive measures such as virus protection programs, firewalls, etc. and
making sure that software is only obtained from trusted sources.

General information • Safety guidelines
12 Panel PC 900 User's Manual V1.05
2.7 Environmentally friendly disposal
All B&R programmable controllers, operating/monitoring devices and uninterruptible power supplies are designed
to inflict as little harm as possible on the environment.
2.7.1 Separation of materials
It is necessary to separate different materials so the device can undergo an environmentally friendly recycling
process.
Component Disposal
Programmable logic controllers
Operating/monitoring devices
Uninterruptible power supply
Batteries and rechargeable batteries
Cables
Electronics recycling
Cardboard box / paper packaging Paper / cardboard recycling
Plastic packaging Plastic recycling
Table 2: Environmentally friendly separation of materials
Disposal must comply with applicable legal regulations.

General information • Guidelines
Chapter 1
General information
Panel PC 900 User's Manual V1.05 13
3 Organization of safety notices
Safety notices in this manual are organized as follows:
Safety notice Description
Danger! Disregarding these safety guidelines and notices can be life-threatening.
Warning! Disregarding these safety guidelines and notices can result in severe injury or substantial damage to equipment.
Caution! Disregarding these safety guidelines and notices can result in injury or damage to equipment.
Information: This information is important for preventing errors.
Table 3: Description of the safety notices used in this documentation
4 Guidelines
E
European dimension standards apply to all dimension diagrams in this document.
All dimensions are specified in mm.
Range of nominal sizes General tolerance according to
DIN ISO 2768 (medium)
Up to 6 mm ±0.1 mm
For 6 to 30 mm ±0.2 mm
For 30 to 120 mm ±0.3 mm
For 120 to 400 mm ±0.5 mm
For 400 to 1000 mm ±0.8 mm
Table 4: Range of nominal sizes

General information • Overview
14 Panel PC 900 User's Manual V1.05
5 Overview
Product ID Short description on page
Automation Runtime
1A4600.10-5 B&R Automation Runtime ARwin, including license sticker 249
1A4601.06-5 B&R Automation Runtime ARemb, including license sticker 249
Batteries
0AC201.91 Lithium batteries 4 pcs., 3 V / 950 mAh button cell We hereby state that the lithium cells contained in this shipment
qualify as "partly regulated". Handle with care. If the package is damaged, inspect the cells, repack intact cells
and protect the cells against short circuit. For emergency information, call RENATA SA at [phone].
255
4A0006.00-000 Lithium battery, 3 V / 950 mAh, button cell 255
Bus units
5AC902.BX01-00 PPC900 bus unit, 1-slot - 1 PCI - 1 slide-in 80
5AC902.BX01-01 PPC900 bus unit, 1-slot - 1 PCI Express x8 - 1 slide-in 80
5AC902.BX02-00 PPC900 bus unit, 2-slot - 2 PCI - 1 slide-in 80
5AC902.BX02-01 PPC900 2-slot bus unit - 1 PCI - 1 PCI Express x8 - 1 slide-in 80
CFast cards
5CFAST.016G-00 CFast card, 16 GB 256
5CFAST.032G-00 CFast card, 32 GB 256
5CFAST.2048-00 CFast card, 2 GB 256
5CFAST.4096-00 CFast card, 4 GB 256
5CFAST.8192-00 CFast card, 8 GB 256
CPU boards
5PC901.TS77-00 CPU board Intel Core i7 3615QE 2.3 GHz - Quad core - QM77 chipset 70
5PC901.TS77-01 CPU board Intel Core i7 3612QE 2.1 GHz - Quad core - QM77 chipset 70
5PC901.TS77-02 CPU board Intel Core i7 3555LE 2.5 GHZ - Dual core - QM77 chipset 70
5PC901.TS77-03 CPU board Intel Core i7 3517UE 1.7 GHz - Dual core - QM77 chipset 70
5PC901.TS77-04 CPU board Intel Core i5 3610ME 2.7 GHz - Dual core - QM77 chipset 70
5PC901.TS77-05 CPU board Intel Core i3 3120ME 2.4 GHz - Dual core - QM77 chipset 70
5PC901.TS77-06 CPU board Intel Core i3 3217UE 1.6 GHz - Dual core - QM77 chipset 70
5PC901.TS77-07 CPU board Intel Celeron 847E 1.1 GHz - Dual core - HM76 chipset 73
5PC901.TS77-08 CPU board Intel Celeron 827E 1.4 GHz - Single core - HM76 chipset 73
5PC901.TS77-09 CPU board Intel Celeron 1020E 2.2 GHz - Dual core - HM76 chipset 73
5PC901.TS77-10 CPU board Intel Celeron 1047UE 1.4 GHz - Dual core - HM76 chipset 73
DVI cable
5CADVI.0018-00 DVI-D cable, 1.8 m 261
5CADVI.0050-00 DVI-D cable, 5 m 261
5CADVI.0100-00 DVI-D cable, 10 m 261
Display units
5AP923.1215-00 Automation Panel 12.1" XGA TFT - 1024 x 768 pixels (4:3) - Single-touch (analog resistive) - IP65 protection
(front)
56
5AP923.1505-00 Automation Panel 15.0" XGA TFT - 1024 x 768 pixels (4:3) - Single-touch (analog resistive) - IP65 protection
(front)
58
5AP923.1906-00 Automation Panel 19.0" SXGA TFT - 1280 x 1024 pixels (4:3) - Single-touch (analog resistive) - IP65 protection
(front)
60
5AP933.156B-00 Automation Panel 15.6" HD TFT - 1366 x 768 pixels (16:9) - Multi-touch (projected capacitive) - IP65 protection
(front)
62
5AP933.185B-00 Automation Panel 18.5" HD TFT - 1366 x 768 pixels (16:9) - Multi-touch (projected capacitive) - IP65 protection
(front)
64
5AP933.215C-00 Automation Panel 21.5" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - IP65
protection (front)
66
5AP933.240C-00 Automation Panel 24.0" Full HD TFT - 1920 x 1080 pixels (16:9) - Multi-touch (projected capacitive) - IP65
protection (front)
68
Drives
5AC901.CCFA-00 CFast adapter for operating a CFast card in a slide-in compact slot 101
5AC901.CHDD-01 500 GB SATA hard disk, slide-in compact, 24/7 operation Note: please see the manual for information about
using this hard disk
83
5AC901.CSSD-03 60 GB SATA slide-in compact SSD (MLC) 85
5AC901.CSSD-04 128 GB SATA SSD (MLC), slide-in compact 88
5AC901.CSSD-05 256 GB SSD MLC - Slide-in compact - Toshiba - SATA 91
5AC901.SDVW-00 DVD-R/RW DVD+R/RW SATA slide-in drive 102
5AC901.SSCA-00 Slide-in compact adapter for operating a slide-in compact drive in a slide-in slot. 104
5MMSSD.0060-01 60 GB SATA SSD (MLC); replacement for 5AC801.SSDI-03 and 5AC901.CSSD-03; SSD for
5PP5IO.GMAC-00; note: please see the manual for information about using this SSD
93
5MMSSD.0128-01 128 GB SATA SSD (MLC); replacement for 5AC801.SSDI-04 and 5AC901.CSSD-04; SSD for
5PP5IO.GMAC-00; note: please see the manual for information about using this SSD
96
5MMSSD.0256-00 256 GB SSD MLC - Slide-in compact - Toshiba - SATA 99
Fan kit
5AC902.FA00-00 PPC900 fan kit - For 5PC911.SX00-00 81
5AC902.FA0X-00 PPC900 fan kit - For PPC900 bus unit 82
Interface options
5AC901.I485-00 RS232/422/485 interface option; for installation in an APC910 or PPC900 105
5AC901.ICAN-00 CAN interface option; for installation in an APC910 or PPC900 109
5AC901.IHDA-00 Audio interface option; connection for 1x MIC, 1x Line IN, 1x Line OUT; for installation in an APC910 113
5AC901.IRDY-00 Ready relay interface option; for APC910 115
5AC901.ISRM-00 SRAM interface option, 2 MB; for installation in an APC910 or PPC900 111

General information • Overview
Chapter 1
General information
Panel PC 900 User's Manual V1.05 15
Product ID Short description on page
Main memory
5MMDDR.1024-03 SO-DIMM DDR3, 1024 MB 78
5MMDDR.2048-03 SO-DIMM DDR3, 2048 MB 78
5MMDDR.4096-03 SO-DIMM DDR3, 4096 MB 78
5MMDDR.8192-03 SO-DIMM DDR3, 8192 MB 78
Power supply
5AC902.PS00-00 PPC900 power supply 85-264 VAC 131
RS232 cable
9A0014.02 RS232 extension cable for remote operation of a display unit with touch screen, 1.8 m 278
9A0014.05 RS232 extension cable for remote operation of a display unit with touch screen, 5 m 278
9A0014.10 RS232 extension cable for remote operation of a display unit with touch screen, 10 m 278
SDL cable - 45° connector
5CASDL.0018-01 SDL cable with 45° male connector, 1.8 m 267
5CASDL.0050-01 SDL cable with 45° male connector, 5 m 267
5CASDL.0100-01 SDL cable with 45° male connector, 10 m 267
5CASDL.0150-01 SDL cable with 45° male connector, 15 m 267
SDL cables
5CASDL.0018-00 SDL cable, 1.8 m 264
5CASDL.0050-00 SDL cable, 5 m 264
5CASDL.0100-00 SDL cable, 10 m 264
5CASDL.0150-00 SDL cable, 15 m 264
5CASDL.0200-00 SDL cable, 20 m 264
5CASDL.0250-00 SDL cable, 25 m 264
5CASDL.0300-00 SDL cable, 30 m 264
SDL flex cable
5CASDL.0018-03 SDL flex cable, 1.8 m 270
5CASDL.0050-03 SDL flex cable, 5 m 270
5CASDL.0100-03 SDL flex cable, 10 m 270
5CASDL.0150-03 SDL flex cable, 15 m 270
5CASDL.0200-03 SDL flex cable, 20 m 270
5CASDL.0250-03 SDL flex cable, 25 m 270
5CASDL.0300-03 SDL flex cable, 30 m 270
5CASDL.0300-13 SDL flex cable with extender, 30 m 273
5CASDL.0400-13 SDL flex cable with extender, 40 m 273
5CASDL.0430-13 SDL flex cable with extender, 43 m 273
System units
5PC911.SX00-00 PPC900 active system unit 76
5PC911.SX00-01 PPC900 passive system unit 77
Terminal blocks
0TB103.9 Connector, 24 VDC, 3-pin female, 3.31 mm² screw clamps, protected against vibration by the screw flange 253
0TB103.91 Connector, 24 VDC, 3-pin female, 3.31 mm² cage clamps, protected against vibration by the screw flange 253
0TB3103.8000 Connector, 230 VAC, 3-pin female, 4 mm² screw clamp, protected against vibration by the screw flange 254
USB accessories
5MMUSB.2048-01 USB 2.0 flash drive, 2048 MB, B&R 259
5MMUSB.4096-01 USB 2.0 flash drive, 4096 MB, B&R 259
USB cable
5CAUSB.0018-00 USB 2.0 connection cable type A - type B, 1.8 m 277
5CAUSB.0050-00 USB 2.0 connection cable type A - type B, 5 m 277
Uninterruptible power supplies
5AC901.BUPS-00 Battery unit 4.5 Ah; for UPS 5AC901.IUPS-00 121
5AC901.BUPS-01 Battery unit 2.2 Ah; for UPS 5AC901.IUPS-01 125
5AC901.IUPS-00 UPS interface option; for installation in an APC910 or PPC900; for 4.5 Ah battery 117
5AC901.IUPS-01 UPS interface option; for installation in an APC910 or PPC900; for 2.2 Ah battery 119
5CAUPS.0005-01 UPS cable 0.5 m; for 5AC901.IUPS-00 and 5AC901.IUPS-01 UPS 129
5CAUPS.0010-01 UPS cable 1 m; for 5AC901.IUPS-00 and 5AC901.IUPS-01 UPS 129
5CAUPS.0030-01 UPS cable 3 m; for 5AC901.IUPS-00 and 5AC901.IUPS-01 UPS 129
Windows 7 Professional/Ultimate
5SWWI7.1100-ENG Microsoft OEM Windows 7 Professional 32-bit, Service Pack 1, DVD, English. Only available with a new device. 241
5SWWI7.1100-GER Microsoft OEM Windows 7 Professional 32-bit, Service Pack 1, DVD, German. Only available with a new device. 241
5SWWI7.1200-ENG Microsoft OEM Windows 7 Professional 64-bit, Service Pack 1, DVD, English. Only available with a new device. 241
5SWWI7.1200-GER Microsoft OEM Windows 7 Professional 64-bit, Service Pack 1, DVD, German. Only available with a new device. 241
5SWWI7.1300-MUL Microsoft OEM Windows 7 Ultimate 32-bit, Service Pack 1, DVD, multilingual. Only available with a new device. 241
5SWWI7.1400-MUL Microsoft OEM Windows 7 Ultimate 64-bit, Service Pack 1, DVD, multilingual. Only available with a new device. 241
Windows Embedded Standard 2009
5SWWXP.0741-ENG Windows Embedded Standard 2009 - English - For PPC900 with QM77/HM76 chipset 247
Windows Embedded Standard 7
5SWWI7.1541-ENG Windows Embedded Standard 7 SP1 - 32-bit - English - For PPC900 with QM77/HM76 chipset - License 243
5SWWI7.1641-ENG Windows Embedded Standard 7 SP1 - 64-bit - English - For PPC900 with QM77/HM76 chipset - License 243
5SWWI7.1741-MUL Windows Embedded Standard 7 Premium SP1 - 32-bit - Multilingual - For PPC900 with QM77/HM76 chipset
- License
243
5SWWI7.1841-MUL Windows Embedded Standard 7 Premium SP1 - 64-bit - Multilingual - For PPC900 with QM77/HM76 chipset
- License
243
Windows XP Professional
5SWWXP.0600-ENG Microsoft OEM Windows XP Professional Service Pack 3, CD, English. Only available with a new device. 245
5SWWXP.0600-GER Microsoft OEM Windows XP Professional Service Pack 3, CD, German. Only available with a new device. 245

General information • Overview
16 Panel PC 900 User's Manual V1.05
Product ID Short description on page
5SWWXP.0600-MUL Microsoft OEM Windows XP Professional Service Pack 3, CD, multilingual. Only available with a new device. 245

Technical data • Introduction
Chapter 2
Technical data
Panel PC 900 User's Manual V1.05 17
Chapter 2 • Technical data
1 Introduction
1.1 About this user's manual
This user's manual contains all relevant information about a functioning Panel PC 900.
1.2 Description of individual modules
1.2.1 Display units
Display units consists of a display and touch screen and form the basis for each Automation Panel 9x3 and Panel
PC 900 System. Different display sizes and touch screen technologies are available. These display units can be
operated exclusively as a complete system together with a link module (Automation Panel 9x3) or CPU board and
system unit (Panel PC 900).
Model numbers for display units with single-touch technology begin with 5AP923.xxxx-xx; those for display units
with multi-touch technology begin with 5AP933.xxxx-xx.
1.2.2 CPU board and system unit
The CPU board integrates all of the PPC900's interfaces and also allows interface options, slide-in compact drives
and CFast cards to be inserted.
A system unit consists of an anthracite gray housing and a heat sink. There are both passive variants (without a
fan kit) and active variants (with a fan kit) available.
A functioning Panel PC 900 is put together by installing a system unit, main memory and mass storage device in
a display unit. Panel PC 900 systems are mounted using retaining clips.
A CPU board and system unit cannot function without a display unit.

Technical data • Introduction
18 Panel PC 900 User's Manual V1.05
1.3 Structure/Configuration
Automation Panel 9x3 and Panel PC900 systems can be assembled to meet individual requirements and operating
conditions. Automation Panel 9x3 and Panel PC 900 systems are so flexible that an Automation Panel can be
rebuilt into a Panel PC and a Panel PC into an Automation Panel.
1.3.1 Configuration
The following components are absolutely essential for operation as a Panel PC 900:
•Display unit
•CPU board
•System unit
•Main memory
•Fan kit1)
•Drive (mass storage device such as CFast card or hard disk) for the operating system
•Software
Panel PC 900 system can be operated with or without a fan kit. This choice plays a role in determining the various
types of housing to be used.
Using a fan kit allows for operation at higher ambient temperatures. More information can be found under "Maximum
ambient temperature during operation" on page 27.
CPU board
Select 1
Select 1
Display unit
Configuration - Base system
CPU board - System unit - Fan kit - Main memory
Select 1
System unit
5PC911.SX00-00 Active system
Select one or two
Main memory
5MMDDR.1024-03
5MMDDR.2048-03
5MMDDR.4096-03
5MMDDR.8192-03
Fan kit Select 1
5AC902.FA00-00
5PC901.TS77-07
5PC901.TS77-08
5PC901.TS77-09
5PC901.TS77-10
5PC901.TS77-04
5PC901.TS77-05
5PC901.TS77-06
5PC901.TS77-00
5PC901.TS77-01
5PC901.TS77-02
5PC901.TS77-03
QM77 CPU boards HM76 CPU boards
5PC911.SX00-01 System, passive
5AP923.1215-00 12.1" XGA single-touch
5AP923.1505-00 15.0" XGA single-touch
5AP923.1906-00 19.0" SXGA single-touch
5AP933.156B-00 15.6" HD multi-touch
5AP933.185B-00 18.5" HD multi-touch
5AP933.215C-00 21.5" FHD multi-touch
5AP933.240C-00 24.0" FHD multi-touch
1)
1) The 5PC901.TS77-00 CPU board can only be used with system unit 5PC911.SX00-00.
Figure 1: Panel PC 900 - Base system configuration
1) It may be necessary to use a fan kit under certain conditions. Detailed information can be found in the section "Maximum ambient temperature during operation"
on page 27.

Technical data • Introduction
Chapter 2
Technical data
Panel PC 900 User's Manual V1.05 19
Select 1
CFast cards
Select 1
Terminal blocks
IF options Select max. 2
Accessory and software configuration
0TB103.9
0TB103.91
DC power connector
Slide-in compact drives Select 1
Select 1
USB accessories
5MMUSB.2048-01
5MMUSB.4096-01
Select 1 each
UPS
5CFAST.2048-00
5CFAST.4096-00
5CFAST.8192-00
5CFAST.016G-00
5CFAST.032G-00
1) Certain limitations must be taken into account when using IF options. For more information,
please refer to the section "Device interfaces" in Chapter 2 "Technical data".
2) The UPS module can only be operated in the IF option 1 slot.
3) If an active system unit is being used, then a fan kit must be selected for the bus unit.
1)
5AC901.IUPS-00 + 5AC901.BUPS-00
5AC901.IUPS-01 + 5AC901.BUPS-01
5CAUPS.0005-01
5CAUPS.0010-01
5CAUPS.0030-01
UPS module Battery unit UPS cable
2)
Slide-in drives Select max. 1
5AC901.SDVW-00
5AC901.SSCA-00
5AC901.CHDD-01
5AC901.CSSD-03
5AC901.CSSD-04
5AC901.CSSD-05
5AC901.CCFA-00
Bus units Select 1
5AC902.BX01-00 Bus 1PCI 1SI
5AC902.BX01-01 Bus 1PCIe.x8 1SI
5AC902.BX02-00 Bus 2PCI 1SI
5AC902.BX02-01 Bus 1PCI 1PCIe.x8 1SI
Bus unit - Slide-in drive - Fan kit
Power supply Select 1
5AC902.PS00-00
0TB3103.8000
AC power connector
Fan kit Select max. 1
5AC902.FA0X-00
3)
5AC901.I485-00
5AC901.ICAN-00
5AC901.IHDA-00
5AC901.ISRM-00
5AC901.IRDY-00
Operating systems Select 1
5SWWI7.1100-ENG
5SWWI7.1100-GER
5SWWI7.1300-MUL
5SWWI7.1200-ENG
5SWWI7.1200-GER
5SWWI7.1400-MUL
Windows 7 Windows Embedded Standard 7
5SWWI7.1541-ENG
5SWWI7.1641-ENG
5SWWI7.1741-MUL
5SWWI7.1841-MUL
Windows Embedded Standard 2009
05SWWXP.071-ENG
Automation Runtime
1A4600.10-5
1A4601.06-5
5SWWXP.0600-ENG
GER
MUL
5SWWXP.0600-
5SWWXP.0600-
Windows XP
Figure 2: Panel PC 900 - Accessory configuration

Technical data • Introduction
20 Panel PC 900 User's Manual V1.05
Configuration options
Panel PC 900 Panel PC 900 with power supply
Figure 3: Panel PC 900 without bus unit
Panel PC 900 with 1-slot bus unit Panel PC 900 with 1-slot bus unit and power supply
Figure 4: Panel PC 900 with 1-slot bus unit
Panel PC 900 with 2-slot bus unit Panel PC 900 with 2-slot bus unit and power supply
Figure 5: Panel PC 900 with 2-slot bus unit