B&R Automation PC 810 User manual
1
Automation PC 810
with GM45 CPU board
User's Manual
Version: 1.28 (May 2013)
Model no.: MAAPC800A-ENG
All information contained in this manual is current as of its creation/publication. We reserve the right to change
the contents of this manual without notice. The information contained herein is believed to be accurate as of
the date of publication; however, Bernecker + Rainer Industrie-Elektronik Ges.m.b.H. makes no warranty, ex-
pressed or implied, with regard to the products or documentation contained within this manual. In addition,
Bernecker + Rainer Industrie-Elektronik Ges.m.b.H. shall not be liable for any incidental or consequential damages
in connection with or arising from the furnishing, performance or use of this documentation. Software names, hard-
ware names and trademarks are registered by their respective companies.
Table of contents
Table of contents
Automation PC 810 with GM45 CPU board user's manual V1.28 3
Chapter 1 General information................................................................................. 13
1 Manual history..................................................................................................................................................13
2 Safety notices...................................................................................................................................................15
2.1 Intended use...............................................................................................................................................15
2.2 Protection against electrostatic discharge..................................................................................................15
2.2.1 Packaging..............................................................................................................................................15
2.2.2 Guidelines for proper ESD handling.....................................................................................................15
2.3 Policies and procedures.............................................................................................................................15
2.4 Transport and storage................................................................................................................................16
2.5 Installation...................................................................................................................................................16
2.6 Operation.................................................................................................................................................... 16
2.6.1 Protection against touching electrical parts.......................................................................................... 16
2.6.2 Environmental conditions - Dust, humidity, aggressive gases............................................................. 16
2.6.3 Viruses and dangerous programs........................................................................................................ 16
2.7 Environmentally friendly disposal............................................................................................................... 17
2.7.1 Separation of materials.........................................................................................................................17
3 Organization of safety notices......................................................................................................................... 18
4 Guidelines.........................................................................................................................................................18
5 Overview...........................................................................................................................................................19
Chapter 2 Technical data.......................................................................................... 22
1 Introduction.......................................................................................................................................................22
1.1 Features......................................................................................................................................................23
1.2 System components / configuration...........................................................................................................23
1.3 Configuration - Base system......................................................................................................................24
1.4 Configuration - Optional components.........................................................................................................25
2 Fully assembled device................................................................................................................................... 26
2.1 Temperature specifications.........................................................................................................................26
2.1.1 Maximum ambient temperature with fan kit......................................................................................... 27
2.1.2 Minimum ambient temperature............................................................................................................. 28
2.1.3 Temperature monitoring........................................................................................................................28
2.1.4 Temperature sensor locations.............................................................................................................. 28
2.2 Humidity specifications............................................................................................................................... 29
2.3 Power management................................................................................................................................... 30
2.3.1 Supply voltage block diagram...............................................................................................................30
2.3.2 Power calculation with 5PC810.SX01-00 Revision >= D0................................................................... 31
2.3.3 Power calculation with 5PC810.SX01-00 revision < D0.......................................................................32
2.3.4 Power calculation with 5PC810.SX02-00 Revision >= D0................................................................... 33
2.3.5 Power calculation with 5PC810.SX02-00 revision < D0.......................................................................34
2.3.6 Power calculation with 5PC810.SX03-00............................................................................................. 35
2.3.7 Power calculation with 5PC810.SX05-00............................................................................................. 36
2.4 Serial number sticker..................................................................................................................................37
2.5 Block diagrams........................................................................................................................................... 39
2.5.1 5PC810.SX01-00 system unit + 5PC810.BX01-00 bus unit.................................................................39
2.5.2 System unit 5PC810.SX01-00 + bus unit 5PC810.BX01-01................................................................ 40
2.5.3 System unit 5PC810.SX02-00 + bus unit 5PC810.BX02-00................................................................ 41
2.5.4 System unit 5PC810.SX02-00 + bus unit 5PC810.BX02-01................................................................ 42
2.5.5 System unit 5PC810.SX03-00 + bus unit 5PC810.BX03-00................................................................ 43
2.5.6 System unit 5PC810.SX05-00 + bus unit 5PC810.BX05-00................................................................ 44
2.5.7 System unit 5PC810.SX05-00 + bus unit 5PC810.BX05-01................................................................ 45
2.5.8 System unit 5PC810.SX05-00 + bus unit 5PC810.BX05-02................................................................ 46
2.6 Device interfaces........................................................................................................................................ 47
2.6.1 +24 VDC supply voltage.......................................................................................................................47
2.6.2 Serial interface COM1.......................................................................................................................... 48
2.6.3 Serial interface COM2.......................................................................................................................... 48
2.6.4 Monitor/Panel connection - SDL (Smart Display Link / DVI)................................................................49
2.6.5 Ethernet 1 (ETH1).................................................................................................................................51
Table of contents
4 Automation PC 810 with GM45 CPU board user's manual V1.28
2.6.6 Ethernet 2 (ETH2).................................................................................................................................52
2.6.7 USB interfaces (USB1, 2, 3, 4, 5)........................................................................................................ 53
2.6.8 MIC, Line IN, Line OUT........................................................................................................................54
2.6.9 Add-on interface slot.............................................................................................................................54
2.6.10 Add-on UPS slot................................................................................................................................. 55
2.6.11 AP Link slot......................................................................................................................................... 55
2.6.12 Card slots (PCI / PCIe).......................................................................................................................56
2.6.13 Status LEDs........................................................................................................................................ 58
2.6.14 CMOS profile switch........................................................................................................................... 58
2.6.15 Power button.......................................................................................................................................59
2.6.16 Reset button........................................................................................................................................59
2.6.17 Battery................................................................................................................................................. 60
2.6.18 Hardware Security Key (Dongle)........................................................................................................ 61
2.6.19 CompactFlash slot 1........................................................................................................................... 62
2.6.20 CompactFlash slot 2........................................................................................................................... 62
2.6.21 Slide-in slot 1...................................................................................................................................... 63
2.6.22 Slide-in slot 2...................................................................................................................................... 63
2.6.23 Slide-in compact slot...........................................................................................................................64
3 Individual components..................................................................................................................................... 65
3.1 System units............................................................................................................................................... 65
3.1.1 5PC810.SX01-00...................................................................................................................................65
3.1.2 5PC810.SX02-00...................................................................................................................................72
3.1.3 5PC810.SX03-00...................................................................................................................................79
3.1.4 5PC810.SX05-00...................................................................................................................................86
3.2 Bus units.....................................................................................................................................................93
3.2.1 General information...............................................................................................................................93
3.2.2 Order data.............................................................................................................................................94
3.2.3 Technical data.......................................................................................................................................94
3.3 CPU boards GM45.....................................................................................................................................96
3.3.1 General information...............................................................................................................................96
3.3.2 Order data.............................................................................................................................................96
3.3.3 Technical data.......................................................................................................................................96
3.4 Heat sink.....................................................................................................................................................98
3.4.1 5AC801.HS00-01.................................................................................................................................. 98
3.5 Main memory..............................................................................................................................................99
3.5.1 5MMDDR.xxxx-02................................................................................................................................. 99
3.6 Drives........................................................................................................................................................100
3.6.1 5AC801.HDDI-00.................................................................................................................................100
3.6.2 5AC801.HDDI-02.................................................................................................................................103
3.6.3 5AC801.HDDI-03.................................................................................................................................105
3.6.4 5AC801.HDDI-04.................................................................................................................................108
3.6.5 5AC801.SSDI-00.................................................................................................................................110
3.6.6 5AC801.SSDI-01.................................................................................................................................114
3.6.7 5AC801.SSDI-02.................................................................................................................................117
3.6.8 5AC801.SSDI-03.................................................................................................................................120
3.6.9 5AC801.ADAS-00................................................................................................................................122
3.6.10 5AC801.HDDS-00............................................................................................................................. 123
3.6.11 5AC801.DVDS-00..............................................................................................................................126
3.6.12 5AC801.DVRS-00............................................................................................................................. 129
3.6.13 5ACPCI.RAIC-03...............................................................................................................................132
3.6.14 5ACPCI.RAIC-04...............................................................................................................................135
3.6.15 5ACPCI.RAIC-05...............................................................................................................................137
3.6.16 5ACPCI.RAIC-06...............................................................................................................................140
3.6.17 5MMHDD.0250-00.............................................................................................................................143
3.6.18 5MMHDD.0500-00.............................................................................................................................145
3.6.19 5MMSSD.0060-00............................................................................................................................. 147
3.6.20 5MMSSD.0060-01............................................................................................................................. 149
Table of contents
Table of contents
Automation PC 810 with GM45 CPU board user's manual V1.28 5
3.6.21 5MMSSD.0180-00............................................................................................................................. 151
3.7 Fan kit.......................................................................................................................................................153
3.7.1 5PC810.FA01-00.................................................................................................................................153
3.7.2 5PC810.FA02-01.................................................................................................................................154
3.7.3 5PC810.FA03-00.................................................................................................................................156
3.7.4 5PC810.FA05-00.................................................................................................................................158
3.8 AP Link cards........................................................................................................................................... 159
3.8.1 5AC801.SDL0-00................................................................................................................................ 159
3.8.2 5AC801.RDYR-00............................................................................................................................... 161
3.9 Ready relay.............................................................................................................................................. 162
3.9.1 5AC801.RDYR-01............................................................................................................................... 162
3.9.2 General information.............................................................................................................................162
3.9.3 Order data...........................................................................................................................................162
3.9.4 Pinout.................................................................................................................................................. 162
3.9.5 Contents of delivery............................................................................................................................ 163
3.10 Add-on interfaces (IF option)..................................................................................................................164
3.10.1 General information...........................................................................................................................164
3.10.2 5AC600.CANI-00...............................................................................................................................164
3.10.3 5AC600.485I-00................................................................................................................................ 167
Chapter 3 Commissioning.......................................................................................170
1 Installation...................................................................................................................................................... 170
1.1 Procedure................................................................................................................................................. 170
1.2 Important mounting information................................................................................................................170
1.3 Mounting orientation................................................................................................................................. 171
1.3.1 Vertical mounting orientation.............................................................................................................. 171
1.3.2 Horizontal mounting orientation.......................................................................................................... 171
1.4 Air circulation spacing.............................................................................................................................. 172
2 Cable connections..........................................................................................................................................173
3 Grounding concept.........................................................................................................................................174
4 General instructions for performing Temperature tests.................................................................................175
4.1 Procedure................................................................................................................................................. 175
4.2 Evaluation of temperatures in Windows operating systems.................................................................... 175
4.2.1 Evaluation using B&R Control Center................................................................................................ 175
4.2.2 Evaluation using the BurnIn tool from Passmark............................................................................... 175
4.3 Evaluating the temperatures in an operating system other than Windows.............................................. 178
4.4 Evaluating the measurement results........................................................................................................178
5 Connection examples.....................................................................................................................................179
5.1 Selecting the display units....................................................................................................................... 179
5.2 One Automation Panel 900 via onboard DVI...........................................................................................180
5.2.1 Basic system requirements.................................................................................................................180
5.2.2 Link modules.......................................................................................................................................180
5.2.3 Cables................................................................................................................................................. 180
5.2.4 Possible Automation Panel units, resolutions and segment lengths.................................................. 181
5.2.5 BIOS settings...................................................................................................................................... 181
5.3 One Automation Panel 900 via onboard SDL..........................................................................................182
5.3.1 Basic system requirements.................................................................................................................182
5.3.2 Link modules.......................................................................................................................................182
5.3.3 Cables................................................................................................................................................. 182
5.3.4 BIOS settings...................................................................................................................................... 183
5.4 One Automation Panel 800 via onboard SDL..........................................................................................184
5.4.1 Basic system requirements.................................................................................................................184
5.4.2 Cables................................................................................................................................................. 184
5.4.3 BIOS settings...................................................................................................................................... 185
5.5 One AP900 and one AP800 via onboard SDL........................................................................................ 186
5.5.1 Basic system requirements.................................................................................................................186
5.5.2 Link modules.......................................................................................................................................186
Table of contents
6 Automation PC 810 with GM45 CPU board user's manual V1.28
5.5.3 Cables................................................................................................................................................. 186
5.5.4 BIOS settings...................................................................................................................................... 186
5.6 Four Automation Panel 900 units via onboard SDL................................................................................ 187
5.6.1 Basic system requirements.................................................................................................................187
5.6.2 Link modules.......................................................................................................................................187
5.6.3 Cables................................................................................................................................................. 187
5.6.4 BIOS settings...................................................................................................................................... 188
5.7 One Automation Panel 900 via SDL AP Link.......................................................................................... 189
5.7.1 Basic system requirements.................................................................................................................189
5.7.2 Link modules.......................................................................................................................................189
5.7.3 Cables................................................................................................................................................. 189
5.7.4 BIOS settings...................................................................................................................................... 190
5.8 Four Automation Panel 900 units via SDL AP Link.................................................................................191
5.8.1 Basic system requirements.................................................................................................................191
5.8.2 Link modules.......................................................................................................................................191
5.8.3 Cables................................................................................................................................................. 191
5.8.4 BIOS settings...................................................................................................................................... 192
5.9 Two Automation Panel 900 units via onboard SDL and SDL AP Link.....................................................193
5.9.1 Basic system requirements.................................................................................................................193
5.9.2 Link modules.......................................................................................................................................193
5.9.3 Cables................................................................................................................................................. 193
5.9.4 BIOS settings...................................................................................................................................... 194
5.10 Eight Automation Panel 900 units via onboard SDL and SDL AP Link................................................. 195
5.10.1 Basic system requirements...............................................................................................................195
5.10.2 Link modules..................................................................................................................................... 195
5.10.3 Cables............................................................................................................................................... 196
5.10.4 BIOS settings.................................................................................................................................... 197
5.11 Six AP900 and two AP800 units via onboard SDL and SDL AP Link....................................................198
5.11.1 Basic system requirements...............................................................................................................198
5.11.2 Link modules..................................................................................................................................... 199
5.11.3 Cables................................................................................................................................................199
5.11.4 BIOS settings.................................................................................................................................... 199
6 Connecting peripheral USB devices..............................................................................................................200
6.1 Locally on the APC810............................................................................................................................ 200
6.2 Remote connection to Automation Panel 900 via DVI.............................................................................201
6.3 Remote connection to Automation Panel 800 / 900 via SDL.................................................................. 201
7 Configuration of a SATA RAID array.............................................................................................................202
7.1 Create RAID set....................................................................................................................................... 203
7.2 Create RAID set - Striped........................................................................................................................ 203
7.3 Create RAID set - Mirrored......................................................................................................................204
7.4 Delete RAID set........................................................................................................................................204
7.5 Rebuild mirrored set.................................................................................................................................205
7.6 Resolve Conflicts......................................................................................................................................205
7.7 Low Level Format.....................................................................................................................................206
8 Known problems / issues...............................................................................................................................207
8.1 Problems and properties of the first production lot..................................................................................207
8.2 Problems and properties of subsequent production lots..........................................................................207
Chapter 4 Software.................................................................................................. 208
1 BIOS options.................................................................................................................................................. 208
1.1 General information.................................................................................................................................. 208
1.2 BIOS setup and boot procedure.............................................................................................................. 208
1.2.1 BIOS setup keys................................................................................................................................. 210
1.3 Main.......................................................................................................................................................... 211
1.4 Advanced.................................................................................................................................................. 212
1.4.1 ACPI Configuration............................................................................................................................. 213
1.4.2 PCI Configuration................................................................................................................................214
Table of contents
Table of contents
Automation PC 810 with GM45 CPU board user's manual V1.28 7
1.4.3 PCI Express Configuration................................................................................................................. 217
1.4.4 Graphics Configuration....................................................................................................................... 219
1.4.5 CPU Configuration.............................................................................................................................. 221
1.4.6 Chipset Configuration..........................................................................................................................222
1.4.7 I/O Interface Configuration..................................................................................................................223
1.4.8 Clock Configuration.............................................................................................................................224
1.4.9 IDE Configuration................................................................................................................................224
1.4.10 USB Configuration............................................................................................................................ 229
1.4.11 Keyboard/Mouse Configuration.........................................................................................................230
1.4.12 CPU Board Monitor...........................................................................................................................232
1.4.13 Main Board/Panel Features.............................................................................................................. 233
1.5 Boot...........................................................................................................................................................237
1.6 Security..................................................................................................................................................... 238
1.6.1 Hard Disk Security User Password.................................................................................................... 239
1.6.2 Hard Disk Security Master Password.................................................................................................240
1.7 Power........................................................................................................................................................240
1.8 Exit............................................................................................................................................................ 242
1.9 BIOS default settings................................................................................................................................243
1.9.1 Main.....................................................................................................................................................243
1.9.2 Advanced.............................................................................................................................................243
1.9.3 Boot..................................................................................................................................................... 247
1.9.4 Security................................................................................................................................................247
1.9.5 Power.................................................................................................................................................. 247
1.10 BIOS error signals (Beep Codes).......................................................................................................... 249
1.11 Distribution of resources.........................................................................................................................250
1.11.1 RAM address assignment................................................................................................................. 250
1.11.2 I/O address assignments.................................................................................................................. 250
1.11.3 Interrupt assignments in PIC mode.................................................................................................. 251
1.11.4 Interrupt assignments in APIC mode................................................................................................ 252
2 Upgrade information.......................................................................................................................................255
2.1 BIOS upgrade...........................................................................................................................................255
2.1.1 Important information.......................................................................................................................... 255
2.1.2 Procedure with MS-DOS.................................................................................................................... 256
2.2 Firmware upgrade.................................................................................................................................... 258
2.2.1 Procedure............................................................................................................................................258
2.2.2 Possible upgrade problems and software dependencies (for V1.00)................................................. 260
2.3 Creating an MS-DOS boot diskette in Windows XP................................................................................261
2.4 Creating a bootable USB flash drive for B&R upgrade files.................................................................... 263
2.4.1 Requirements...................................................................................................................................... 263
2.4.2 Procedure............................................................................................................................................263
2.4.3 How to access MS-DOS.....................................................................................................................263
2.5 Creating a bootable CompactFlash card for B&R upgrade files..............................................................264
2.5.1 Requirements...................................................................................................................................... 264
2.5.2 Procedure............................................................................................................................................264
2.5.3 How to access MS-DOS.....................................................................................................................264
2.6 Upgrade problems.................................................................................................................................... 264
3 Microsoft DOS................................................................................................................................................265
3.1 Order data................................................................................................................................................ 265
3.2 Known problems.......................................................................................................................................265
3.3 Resolutions and color depths...................................................................................................................265
4 Windows XP Professional..............................................................................................................................266
4.1 Order data................................................................................................................................................ 266
4.2 Overview................................................................................................................................................... 266
4.3 Installation.................................................................................................................................................266
4.3.1 Installation on a PCI SATA RAID controller - 5ACPCI.RAIC-03, 5ACPCI.RAIC-05,
5ACPCI.RAIC-06.......................................................................................................................................... 267
4.3.2 For 5PCI slot model............................................................................................................................267
Table of contents
8 Automation PC 810 with GM45 CPU board user's manual V1.28
4.4 Drivers.......................................................................................................................................................267
5 Windows 7......................................................................................................................................................268
5.1 General information.................................................................................................................................. 268
5.2 Order data................................................................................................................................................ 268
5.3 Overview................................................................................................................................................... 268
5.4 Installation.................................................................................................................................................269
5.4.1 Installation on a PCI SATA RAID controller - 5ACPCI.RAIC-03, 5ACPCI.RAIC-05,
5ACPCI.RAIC-06.......................................................................................................................................... 269
5.4.2 For 5PCI slot model............................................................................................................................269
5.5 Special considerations, limitations........................................................................................................... 269
5.6 Drivers.......................................................................................................................................................269
6 Windows Embedded Standard 2009............................................................................................................. 270
6.1 General information.................................................................................................................................. 270
6.2 Order data................................................................................................................................................ 270
6.3 Overview................................................................................................................................................... 270
6.4 Features with WES2009 (Windows Embedded Standard 2009)............................................................. 270
6.5 Installation.................................................................................................................................................271
6.6 Drivers.......................................................................................................................................................271
6.6.1 Touch screen driver............................................................................................................................ 271
7 Windows Embedded Standard 7................................................................................................................... 272
7.1 General information.................................................................................................................................. 272
7.2 Order data................................................................................................................................................ 272
7.3 Overview................................................................................................................................................... 272
7.4 Features with WES7 (Windows Embedded Standard 7)......................................................................... 272
7.5 Installation.................................................................................................................................................273
7.6 Drivers.......................................................................................................................................................273
7.6.1 Touch screen driver............................................................................................................................ 273
8 Automation Runtime.......................................................................................................................................274
8.1 General information.................................................................................................................................. 274
8.2 Order data................................................................................................................................................ 274
8.3 Automation Runtime Windows (ARwin)................................................................................................... 274
8.4 Automation Runtime Embedded (ARemb)...............................................................................................274
9 B&R Automation Device Interface (ADI) - Control Center.............................................................................275
9.1 Functions.................................................................................................................................................. 275
9.2 Installation.................................................................................................................................................276
9.3 SDL Equalizer settings.............................................................................................................................277
9.4 UPS configuration.....................................................................................................................................278
9.4.1 Installing the UPS service for the B&R add-on UPS..........................................................................278
9.4.2 Displaying the UPS default values..................................................................................................... 278
9.4.3 Changing UPS battery settings.......................................................................................................... 279
9.4.4 Updating the UPS battery settings..................................................................................................... 280
9.4.5 Saving the UPS battery settings.........................................................................................................281
9.4.6 Configuring UPS system settings....................................................................................................... 281
9.4.7 Changing additional UPS settings...................................................................................................... 282
9.4.8 Procedure following power failure...................................................................................................... 284
10 B&R Automation Device Interface (ADI) Development Kit.......................................................................... 285
11 B&R Automation Device Interface (ADI) .NET SDK.................................................................................... 287
12 B&R Key Editor............................................................................................................................................289
Chapter 5 Standards and certifications................................................................. 291
1 Standards and guidelines.............................................................................................................................. 291
1.1 CE mark....................................................................................................................................................291
1.2 EMC directive........................................................................................................................................... 291
1.3 Low-voltage directive................................................................................................................................291
2 Certifications...................................................................................................................................................292
2.1 UL certification..........................................................................................................................................292
2.2 Certifications for use in potentially explosive environments.....................................................................292
Table of contents
Table of contents
Automation PC 810 with GM45 CPU board user's manual V1.28 9
2.2.1 UL Haz. Loc. Certifications................................................................................................................. 292
2.2.2 ATEX certification................................................................................................................................292
2.2.3 Requirements for use in potentially explosive environments..............................................................293
Chapter 6 Accessories............................................................................................ 294
1 Replacement CMOS batteries....................................................................................................................... 294
1.1 0AC201.91 / 4A0006.00-000....................................................................................................................294
1.1.1 General information.............................................................................................................................294
1.1.2 Order data...........................................................................................................................................294
1.1.3 Technical data.....................................................................................................................................294
2 Power connectors.......................................................................................................................................... 296
2.1 0TB103.9x.................................................................................................................................................296
2.1.1 General information.............................................................................................................................296
2.1.2 Order data...........................................................................................................................................296
2.1.3 Technical data.....................................................................................................................................296
3 Replacement fan............................................................................................................................................297
3.1 General information.................................................................................................................................. 297
3.2 Order data................................................................................................................................................ 297
4 DVI - Monitor adapter.................................................................................................................................... 298
4.1 5AC900.1000-00.......................................................................................................................................298
4.2 General information.................................................................................................................................. 298
4.3 Order data................................................................................................................................................ 298
5 CompactFlash cards...................................................................................................................................... 299
5.1 General information.................................................................................................................................. 299
5.2 General information.................................................................................................................................. 299
5.2.1 Flash technology................................................................................................................................. 299
5.2.2 Wear leveling...................................................................................................................................... 299
5.2.3 ECC error correction...........................................................................................................................299
5.2.4 S.M.A.R.T. support.............................................................................................................................. 299
5.2.5 Maximum reliability..............................................................................................................................300
5.3 5CFCRD.xxxx-06...................................................................................................................................... 301
5.3.1 General information.............................................................................................................................301
5.3.2 Order data...........................................................................................................................................301
5.3.3 Technical data.....................................................................................................................................301
5.3.4 Temperature humidity diagram........................................................................................................... 303
5.3.5 Dimensions..........................................................................................................................................304
5.3.6 Benchmark.......................................................................................................................................... 304
5.4 5CFCRD.xxxx-04...................................................................................................................................... 306
5.4.1 General information.............................................................................................................................306
5.4.2 Order data...........................................................................................................................................306
5.4.3 Technical data.....................................................................................................................................306
5.4.4 Temperature humidity diagram........................................................................................................... 308
5.4.5 Dimensions..........................................................................................................................................309
5.4.6 Benchmark.......................................................................................................................................... 309
5.5 5CFCRD.xxxx-03...................................................................................................................................... 311
5.5.1 General information.............................................................................................................................311
5.5.2 Order data...........................................................................................................................................311
5.5.3 Technical data.....................................................................................................................................311
5.5.4 Temperature humidity diagram........................................................................................................... 313
5.5.5 Dimensions..........................................................................................................................................313
5.6 Known problems / issues......................................................................................................................... 314
6 USB media drive............................................................................................................................................315
6.1 5MD900.USB2-01.....................................................................................................................................315
6.1.1 General information.............................................................................................................................315
6.1.2 Order data...........................................................................................................................................315
6.1.3 Interfaces.............................................................................................................................................315
6.1.4 Technical data.....................................................................................................................................315
Table of contents
10 Automation PC 810 with GM45 CPU board user's manual V1.28
6.1.5 Dimensions..........................................................................................................................................317
6.1.6 Dimensions with front cover............................................................................................................... 318
6.1.7 Cutout installation................................................................................................................................318
6.1.8 Contents of delivery............................................................................................................................ 318
6.1.9 Installation........................................................................................................................................... 318
6.2 5MD900.USB2-02.....................................................................................................................................320
6.2.1 General information.............................................................................................................................320
6.2.2 Order data...........................................................................................................................................320
6.2.3 Interfaces.............................................................................................................................................320
6.2.4 Technical data.....................................................................................................................................320
6.2.5 Dimensions..........................................................................................................................................322
6.2.6 Dimensions with front cover............................................................................................................... 323
6.2.7 Cutout installation................................................................................................................................323
6.2.8 Contents of delivery............................................................................................................................ 323
6.2.9 Installation........................................................................................................................................... 323
6.3 5A5003.03.................................................................................................................................................325
6.3.1 General information.............................................................................................................................325
6.3.2 Order data...........................................................................................................................................325
6.3.3 Technical data.....................................................................................................................................325
6.3.4 Dimensions..........................................................................................................................................325
6.3.5 Contents of delivery............................................................................................................................ 325
6.3.6 Installation........................................................................................................................................... 326
7 USB flash drives............................................................................................................................................ 327
7.1 5MMUSB.2048-00.................................................................................................................................... 327
7.1.1 General information.............................................................................................................................327
7.1.2 Order data...........................................................................................................................................327
7.1.3 Technical data.....................................................................................................................................327
7.1.4 Temperature humidity diagram........................................................................................................... 328
7.2 5MMUSB.2048-01.................................................................................................................................... 329
7.2.1 General information.............................................................................................................................329
7.2.2 Order data...........................................................................................................................................329
7.2.3 Technical data.....................................................................................................................................329
7.2.4 Temperature humidity diagram........................................................................................................... 330
8 HMI Drivers & Utilities DVD...........................................................................................................................331
8.1 5SWHMI.0000-00..................................................................................................................................... 331
8.1.1 General information.............................................................................................................................331
8.1.2 Order data...........................................................................................................................................331
8.1.3 Contents (V2.10)................................................................................................................................. 331
9 Uninterruptible power supply......................................................................................................................... 334
9.1 Features....................................................................................................................................................334
9.2 Requirements............................................................................................................................................334
9.3 5AC600.UPSI-00...................................................................................................................................... 335
9.3.1 General information.............................................................................................................................335
9.3.2 Order data...........................................................................................................................................335
9.3.3 Technical data.....................................................................................................................................335
9.3.4 Installation........................................................................................................................................... 335
9.4 5AC600.UPSB-00..................................................................................................................................... 337
9.4.1 General information.............................................................................................................................337
9.4.2 Order data...........................................................................................................................................337
9.4.3 Technical data.....................................................................................................................................337
9.4.4 Temperature life span diagram up to 20% battery capacity...............................................................338
9.4.5 Deep discharge cycles........................................................................................................................338
9.4.6 Dimensions..........................................................................................................................................339
9.4.7 Drilling template.................................................................................................................................. 339
9.4.8 Mounting instructions.......................................................................................................................... 339
9.5 5CAUPS.00xx-00......................................................................................................................................340
9.5.1 General information.............................................................................................................................340
Table of contents
Table of contents
Automation PC 810 with GM45 CPU board user's manual V1.28 11
9.5.2 Order data...........................................................................................................................................340
9.5.3 Technical data.....................................................................................................................................340
9.6 5AC600.UPSF-00..................................................................................................................................... 341
9.6.1 General information.............................................................................................................................341
9.6.2 Order data...........................................................................................................................................341
9.7 5AC600.UPSF-01..................................................................................................................................... 341
9.7.1 General information.............................................................................................................................341
9.7.2 Order data...........................................................................................................................................341
10 Line filter.......................................................................................................................................................342
10.1 5AC804.MFLT-00....................................................................................................................................342
10.1.1 General information...........................................................................................................................342
10.1.2 Order data.........................................................................................................................................342
10.1.3 Technical data...................................................................................................................................342
10.1.4 Dimensions........................................................................................................................................343
10.1.5 Drilling template................................................................................................................................ 343
10.1.6 Connecting to the end device...........................................................................................................343
11 PCI Insert cards........................................................................................................................................... 344
11.1 5ACPCI.ETH1-01....................................................................................................................................344
11.1.1 General information...........................................................................................................................344
11.1.2 Order data......................................................................................................................................... 344
11.1.3 Technical data................................................................................................................................... 344
11.1.4 Driver support....................................................................................................................................345
11.1.5 Dimensions........................................................................................................................................ 346
11.2 5ACPCI.ETH3-01....................................................................................................................................347
11.2.1 General information...........................................................................................................................347
11.2.2 Order data......................................................................................................................................... 347
11.2.3 Technical data................................................................................................................................... 347
11.2.4 Driver support....................................................................................................................................348
11.2.5 Dimensions........................................................................................................................................ 349
12 Cables.......................................................................................................................................................... 350
12.1 DVI cables.............................................................................................................................................. 350
12.1.1 5CADVI.0xxx-00................................................................................................................................ 350
12.2 SDL cables............................................................................................................................................. 353
12.2.1 5CASDL.0xxx-00............................................................................................................................... 353
12.3 SDL cables with 45° connector..............................................................................................................356
12.3.1 5CASDL.0xxx-01............................................................................................................................... 356
12.4 SDL flex cables...................................................................................................................................... 359
12.4.1 5CASDL.0xxx-03............................................................................................................................... 359
12.5 SDL flex cables with extender............................................................................................................... 363
12.5.1 5CASDL.0xx0-13...............................................................................................................................363
12.6 USB cables.............................................................................................................................................367
12.6.1 5CAUSB.00xx-00.............................................................................................................................. 367
12.7 RS232 cables......................................................................................................................................... 369
12.7.1 9A0014.xx........................................................................................................................................ 369
12.8 Internal supply cable.............................................................................................................................. 371
12.8.1 5CAMSC.0001-00............................................................................................................................. 371
13 HDD replacement disk tray..........................................................................................................................372
13.1 5AC801.FRAM-00...................................................................................................................................372
13.1.1 General information...........................................................................................................................372
13.1.2 Order data.........................................................................................................................................372
13.1.3 Technical data...................................................................................................................................372
13.1.4 Dimensions........................................................................................................................................373
Chapter 7 Maintenance / Service............................................................................374
1 Changing the battery..................................................................................................................................... 374
1.1 Battery status evaluation.......................................................................................................................... 374
1.2 Procedure................................................................................................................................................. 374
Table of contents
12 Automation PC 810 with GM45 CPU board user's manual V1.28
2 Replacing a CompactFlash card................................................................................................................... 376
3 Installing / exchanging a slide-in compact drive............................................................................................377
3.1 Procedure................................................................................................................................................. 377
4 Installing / exchanging a slide-in drive.......................................................................................................... 378
4.1 Procedure................................................................................................................................................. 378
5 Installing a slide-in compact adapter............................................................................................................. 379
5.1 Procedure................................................................................................................................................. 379
6 Installing / exchanging the fan kit..................................................................................................................381
6.1 Procedure................................................................................................................................................. 381
7 Installing the UPS module............................................................................................................................. 383
7.1 Installation without installed add-on interface module............................................................................. 383
7.1.1 APC810 1 card slot............................................................................................................................ 383
7.1.2 APC810 2 and 3 card slot..................................................................................................................385
7.1.3 APC810 5 card slot............................................................................................................................ 387
7.2 Installation with installed add-on interface module.................................................................................. 389
7.2.1 APC810 1 card slot............................................................................................................................ 389
7.2.2 APC810 2 and 3 card slot..................................................................................................................391
7.2.3 APC810 5 card slot............................................................................................................................ 393
8 Installing the UPS fuse kit on the battery unit...............................................................................................395
8.1 Procedure................................................................................................................................................. 395
9 Mounting the side cover................................................................................................................................ 397
9.1 APC810 with 1 card slot.......................................................................................................................... 397
9.2 APC810 with 2 and 3 card slot................................................................................................................397
9.3 APC810 with 5 card slot.......................................................................................................................... 398
10 AP Link installation...................................................................................................................................... 399
10.1 Procedure............................................................................................................................................... 399
11 Exchanging a PCI SATA RAID hard disk in a RAID 1 system....................................................................400
11.1 Procedure................................................................................................................................................400
12 Installing the HDD replacement disk tray.................................................................................................... 402
12.1 Procedure............................................................................................................................................... 402
13 Installing the ready relay /2 in the add-on UPS slot....................................................................................403
13.1 Procedure............................................................................................................................................... 403
Appendix A .............................................................................................................. 405
1 Maintenance Controller Extended (MTCX)....................................................................................................405
1.1 Temperature monitoring - Fan control..................................................................................................... 405
2 Connecting an external device to the mainboard..........................................................................................407
General information • Manual history
Chapter 1
General information
Automation PC 810 with GM45 CPU board user's manual V1.28 13
Chapter 1 • General information
1 Manual history
Version Date Change
1.00 18-Jan-10 •First version
1.05 24-Mar-10 •Documentation "Automation PC 810 with BM45 CPU board" renamed to "Automation PC 810 with GM45
CPU board".
•Table "Table 17: Monitor/Panel connection - RGB, DVI, SDL" on page 49 corrected.
•Figure "Figure 2: Configuration - Optional components" on page 25 corrected.
•Section "Automation PC 810 with Windows XP Embedded" renamed to "Automation PC 810 with Win-
dows Embedded Standard 2009", see page 270.
1.10 26-Jul-10 •Chapter 5 "Standards and certifications" on page 291 revised.
•CPU board name changed from BM45 to GM45.
•The system unit 5PC810.SX03-00, the bus unit 5PC810.BX03-00, the fan kit 5PC810.FA03-00 and the
replacement fan 5AC801.FA03-00 added.
•CPU board 5PC800.BM45-01 added.
•Main memory 5MMDDR.4096-02 added.
•B&R ID codes for system units added.
•Technical data "Remanent variables for AR (Automation Runtime) in Power Fail Mode" added for the
APC810 system units.
•Updated section 9 "B&R Automation Device Interface (ADI) - Control Center" on page 275.
•B&R 16 GB CompactFlash card (5CFCRD.016G-04) added.
•Updated section 12 "Cables" on page 350 in Chapter 6 "Accessories".
•Updated B&R USB flash drive in Chapter 6 "Accessories" on page 294.
•Updated section 5 "Windows 7" on page 268 in "Software".
1.11 04-Nov-10 •Updated 5AC801.RDYR-01 ready relay in Chapter 6 "Accessories".
•Updated section 13 "Installing the ready relay /2 in the add-on UPS slot" on page 403 in Chapter 7
"Maintenance / Service".
•"5AC801.HDDI-03" on page 105added.
•"5ACPCI.RAIC-05" on page 137 added.
•"5MMHDD.0250-00" on page 143 added.
•Revised "Figure 2: Configuration - Optional components" on page 25.
•5AC801.HDDI-03, 5ACPCI.RAIC-05 and 5MMHDD.0250-00 updated in section 2.1.1 "Maximum ambient
temperature with fan kit" on page 27 and 2.2 "Humidity specifications" on page 29.
1.12 18-Feb-11 •BIOS updated to Version 1.13.
•Section 5 "CompactFlash cards" on page 299 updated.
•Section 7 "Windows Embedded Standard 7" on page 272 added.
1.13 24-May-11 •Sections "Automation Runtime" on page 274, "B&R Automation Runtime dongle" on page 378 and
"B&R Automation Device Interface (ADI) .NET SDK" on page 287 added.
•Revised sections "B&R Key Editor" on page 289, "B&R Automation Device Interface (ADI) Development
Kit" on page 285, "B&R Automation Device Interface (ADI) - Control Center" on page 275 and "HMI
Drivers & Utilities DVD" on page 331.
•Bus unit 5PC810.BX05-02 added
•Revised "Figure 2: Configuration - Optional components" on page 25.
•5SWWI7.0900-MUL and 5SWWI7.1000-MUL in section "Windows Embedded Standard 7" on page 272
added.
1.14 06-Jul-11 •Updated USB5 in heading ("USB interfaces (USB1, 2, 3, 4, 5)" on page 53).
•Section "Add-on UPS slot" on page 55 revised.
•5CFCRD.016G-04 added in table "Table 36: CompactFlash slot (CF1)" on page 62.
•5AC801.HDDI-03 added in table "Table 40: Slide-in compact slot" on page 64 and short description
for 5AC801.HDDI-02 corrected.
•Table entry "Charge duration when battery low“ added "Table 264: 5AC600.UPSB-00, 5AC600.UPSB-00
- Technical data" on page 337.
•Sections "B&R Automation Device Interface (ADI) - Control Center" on page 275, "B&R Automation
Device Interface (ADI) Development Kit" on page 285 and "B&R Automation Device Interface (ADI) .NET
SDK" on page 287 revised.
•Updated information regarding "Special considerations for the 5PCI slot variant" in "Windows XP Profes-
sional" on page 266 and "Windows 7" on page 268.
•Corrected information on "Windows XP mode" in section "Features with WES7 (Windows Embedded
Standard 7)" on page 272.
•Revised reference to external UPS 24 VDC in section "Uninterruptible power supply" on page 334.
Table 1: Manual history
General information • Manual history
14 Automation PC 810 with GM45 CPU board user's manual V1.28
Version Date Change
1.20 23-Apr-12 •Revised section "CompactFlash cards" on page 299.
•Section "B&R Automation Device Interface (ADI) Development Kit" moved to "Software" chapter.
•Section "Temperature sensor locations" moved to "Technical data" chapter.
•New CompactFlash cards 5CFCRD.xxxx-06 added in Chapter 6 "Accessories". CompactFlash cards
5CFCRD.xxxx-04 discontinued.
•Removed section "B&R Automation Runtime dongle" and updated the order data in section "Automation
Runtime" on page 274.
•BIOS Version updated (1.13 -> 1.15).
•Information about Automation Device Interface and Key Editor updated.
•Entire manual revised according to current formatting standards.
1.21 25-Jun-12 •Updated section "Card slots (PCI / PCIe)" on page 56 to include information regarding using 64-bit
PCI cards.
•BIOS version updated (1.15 -> 1.17).
•Section "Cable lengths and resolutions for SDL transmission" on page 49 updated
•Information regarding "PCI to PCI bridge" added to the "Technical data" on page 94 for the bus units.
•Updated information regarding "PCIe to SATA bridge" in section 2.6.22 "Slide-in slot 2" on page 63.
•Moved ready relay 5AC801.RDYR-01 to section "5AC801.RDYR-01".
1.22 04-Jul-12 •CPU board model numbers corrected in the "Figure X: Maximale Umgebungstemperatur mit Lüfter Kit"
on page .
1.25 01-Oct-12 •Section "Organization of safety notices" on page 18 revised, descriptions for cautions and warnings
updated
•SSD drives "5AC801.SSDI-01" on page 114 and "5AC801.SSDI-02" on page 117 added.
•Section "General instructions for performing Temperature tests" on page 175 updated
•Windows 7 Service Pack 1 updated (see "Windows 7" on page 268).
•Windows Embedded Standard 7 Service Pack 1 updated (see "Windows Embedded Standard 7" on page
272).
•"B&R Automation Device Interface (ADI) - Control Center" on page 275 updated.
•Updated "B&R Automation Device Interface (ADI) Development Kit" on page 285 to version 3.40.
•Updated "B&R Automation Device Interface (ADI) .NET SDK" on page 287 to version 1.80.
•Updated "B&R Key Editor" on page 289 to version 3.30.
•Updated technical data for CPU boards, see "CPU boards GM45" on page 96.
1.26 21-Nov-12 •Updated B&R CompactFlash card 5CFCRD.032G-06, see "5CFCRD.xxxx-06" on page 301.
•Revised technical data for UPS cables, see "5CAUPS.00xx-00" on page 340.
1.27 15-Mar-13 •Updated the following drives: "5AC801.HDDI-04" on page 108, "5ACPCI.RAIC-06" on page 140,
"5MMHDD.0500-00" on page 145
•General information revised for drives "5ACPCI.RAIC-05" on page 137 and "5MMHDD.0250-00" on
page 143.
•Revised order data for system units "5PC810.SX01-00" on page 65, "5PC810.SX02-00" on page
72, "5PC810.SX03-00" on page 79 and "5PC810.SX05-00" on page 86.
1.28 15-May-13 •Chapter 5 "Standards and certifications" on page 291 revised.
•Revised information regarding certifications in technical data of individual components.
•Updated line filter "5AC804.MFLT-00" on page 342.
•Updated add-on fuse kit "5AC600.UPSF-00" on page 341 and replacement fuses "5AC600.UPSF-01"
on page 341 for the UPS battery unit.
•Updated slide-in compact drive "5AC801.SSDI-03" on page 120.
•Updated replacement SSDs "5MMSSD.0060-00" on page 147, "5MMSSD.0060-01" on page 149 and
"5MMSSD.0180-00" on page 151.
Table 1: Manual history
General information • Safety notices
Chapter 1
General information
Automation PC 810 with GM45 CPU board user's manual V1.28 15
2 Safety notices
2.1 Intended use
Programmable logic controllers (PLCs), operating/monitoring devices (industrial PCs, Power Panels, Mobile Pan-
els, etc.), and B&R uninterruptible power supplies have been designed, developed, and manufactured for conven-
tional use in industrial environments. They were not designed, developed and manufactured for any use involving
serious risks or hazards that could lead to death, injury, serious physical damage or loss of any kind without the
implementation of exceptionally stringent safety precautions. In particular, such risks and hazards include the use
of these devices to monitor nuclear reactions in nuclear power plants, their use in flight control or flight safety sys-
tems as well as in the control of mass transportation systems, medical life support systems or weapons systems.
2.2 Protection against electrostatic discharge
Electrical components that can be damaged by electrostatic discharge (ESD) must be handled accordingly.
2.2.1 Packaging
•Electrical components with a housing
...Do not require special ESD packaging but must be handled properly (see "Electrical components with
a housing").
•Electrical components without a housing
…Must be protected by ESD-suitable packaging.
2.2.2 Guidelines for proper ESD handling
Electrical components with a housing
•Do not touch the connector contacts on connected cables.
•Do not touch the contact tips on circuit boards.
Electrical components without a housing
The following applies in addition to the points listed under "Electrical components with a housing":
•Any persons handling electrical components or devices with installed electrical components must be
grounded.
•Components may only be touched on their narrow sides or front plate.
•Components should always be stored in a suitable medium (ESD packaging, conductive foam, etc.). Metal-
lic surfaces are not suitable storage surfaces!
•Components should not be subjected to electrostatic discharge (e.g. through the use of charged plastics).
•Ensure a minimum distance of 10 cm from monitors and TV sets.
•Measurement devices and equipment must be grounded.
•Measurement probes on potential-free measurement devices must be discharged on sufficiently grounded
surfaces before taking measurements.
Individual components
•ESD protective measures for individual components are thoroughly integrated at B&R (conductive floors,
footwear, arm bands, etc.).
•These increased ESD protective measures for individual components are not necessary for customers
handling B&R products.
2.3 Policies and procedures
Electronic devices are never completely failsafe. If the programmable control system, operating/monitoring device
or uninterruptible power supply fails, the user is responsible for ensuring that other connected devices, e.g. motors,
are brought to a secure state.
General information • Safety notices
16 Automation PC 810 with GM45 CPU board user's manual V1.28
When using programmable logic controllers or operating/monitoring devices as control systems together with a Soft
PLC (e.g. B&R Automation Runtime or comparable product) or Slot PLC (e.g. B&R LS251 or comparable product),
the safety precautions applying to industrial control systems (e.g. the provision of safety devices such as emergency
stop circuits, etc.) must be observed in accordance with applicable national and international regulations. The same
applies for all other devices connected to the system, such as drives.
All tasks such as the installation, commissioning and servicing of devices are only permitted to be carried out by
qualified personnel. Qualified personnel are those familiar with the transport, mounting, installation, commission-
ing and operation of of devices who also have the appropriate qualifications (e.g. IEC 60364). National accident
prevention regulations must be observed.
The safety notices, connection descriptions (type plate and documentation) and limit values listed in the technical
data are to be read carefully before installation and commissioning and must be observed.
2.4 Transport and storage
During transport and storage, devices must be protected against undue stress (mechanical loads, temperature,
humidity, aggressive atmospheres, etc.).
2.5 Installation
•Installation must be performed according to this documentation using suitable equipment and tools.
•Devices may only be installed by qualified personnel without voltage applied. Before installation, voltage
to the control cabinet must be switched off and prevented from being switched on again.
•General safety guidelines and national accident prevention regulations must be observed.
•Electrical installation must be carried out according to applicable guidelines (e.g. line cross sections, fuses,
protective ground connections).
2.6 Operation
2.6.1 Protection against touching electrical parts
To operate programmable logic controllers, operating/monitoring devices or uninterruptible power supplies, it is
necessary for certain parts to carry dangerous voltage levels over 42 VDC. Touching one of these parts can result
in a life-threatening electric shock. This could lead to death, severe injury or damage to equipment.
Before turning on the programmable logic controller, operating/monitoring devices or the uninterruptible power
supply, the housing must be properly grounded (PE rail). Ground connections must be established even when
testing or operating operating/monitoring devices or the uninterruptible power supply for a short time!
Before turning the device on, all parts that carry voltage must be securely covered. During operation, all covers
must remain closed.
2.6.2 Environmental conditions - Dust, humidity, aggressive gases
The use of operating/monitoring devices (e.g. industrial PCs, Power Panels, Mobile Panels, etc.) and uninterruptible
power supplies in very dusty environments should be avoided. Dust collection on the devices can affect functionality
and may prevent sufficient cooling, especially in systems with active cooling systems (fans).
The presence of aggressive gases can also lead to malfunctions. When combined with high temperature and
humidity, aggressive gases – e.g. with sulfur, nitrogen and chlorine components – can induce chemical reactions
that can damage electronic components very quickly. Signs of the presence of aggressive gases are blackened
copper surfaces and cable ends on existing equipment.
For operation in dusty or humid conditions, correctly installed (e.g. cutout installations) operating/monitoring devices
like the Automation Panel or Power Panel are protected on the front. The back of all devices must be protected
from dust and humidity and cleaned at suitable intervals.
2.6.3 Viruses and dangerous programs
This system is subject to potential risk each time data is exchanged or software is installed from a data medium
(e.g. diskette, CD-ROM, USB flash drive, etc.), a network connection or the Internet. The user is responsible for
assessing these dangers, implementing preventive measures such as virus protection programs, firewalls, etc. and
making sure that software is only obtained from trusted sources.
General information • Safety notices
Chapter 1
General information
Automation PC 810 with GM45 CPU board user's manual V1.28 17
2.7 Environmentally friendly disposal
All B&R programmable controllers, operating/monitoring devices and uninterruptible power supplies are designed
to inflict as little harm as possible on the environment.
2.7.1 Separation of materials
It is necessary to separate different materials so the device can undergo an environmentally friendly recycling
process.
Component Disposal
Programmable logic controllers
Operating/monitoring devices
Uninterruptible power supply
Batteries and rechargeable batteries
Cables
Electronics recycling
Cardboard box / paper packaging Paper / cardboard recycling
Plastic packaging Plastic recycling
Table 2: Environmentally friendly separation of materials
Disposal must comply with applicable legal regulations.
General information • Guidelines
18 Automation PC 810 with GM45 CPU board user's manual V1.28
3 Organization of safety notices
Safety notices in this manual are organized as follows:
Safety notice Description
Danger! Disregarding these safety guidelines and notices can be life-threatening.
Warning! Disregarding these safety guidelines and notices can result in severe injury or substantial damage to equipment.
Caution! Disregarding these safety guidelines and notices can result in injury or damage to equipment.
Information: This information is important for preventing errors.
Table 3: Description of the safety notices used in this documentation
4 Guidelines
E
European dimension standards apply to all dimension diagrams in this document.
All dimensions are specified in mm.
Range of nominal sizes General tolerance according to
DIN ISO 2768 (medium)
Up to 6 mm ± 0.1 mm
For 6 to 30 mm ± 0.2 mm
For 30 to 120 mm ± 0.3 mm
For 120 to 400 mm ± 0.5 mm
For 400 to 1000 mm ± 0.8 mm
Table 4: Range of nominal sizes
General information • Overview
Chapter 1
General information
Automation PC 810 with GM45 CPU board user's manual V1.28 19
5 Overview
Product ID Short description on page
Accessories
5AC801.FA01-00 Fan filter for APC810 5 pcs. (spare part), for 5PC810.SX01-00. 297
5AC801.FA02-00 Fan filter for APC810 5 pcs. (spare part), for 5PC810.SX02-00. 297
5AC801.FA03-00 Fan filter for APC810 5 pcs. (spare part), for 5PC810.SX03-00. 297
5AC801.FA05-00 Fan filter for APC810 5 pcs. (spare part), for 5PC810.SX05-00. 297
5AC801.FRAM-00 APC810 SATA Hard Disk Replacement Tray 372
5AC801.RDYR-01 162
5AC804.MFLT-00 Mains filter 342
5ACPCI.ETH1-01 PCI Ethernet card 1x 10/100 344
5ACPCI.ETH3-01 PCI Ethernet card 3x 10/100 347
5CAMSC.0001-00 Internal power supply cable 371
Automation PC / Panel PC
1A4601.06 B&R Automation Runtime ARemb, incl. License Label and Security Key 274
Automation Panel Link interfaces
5AC801.RDYR-00 Ready relay for APC810 161
5AC801.SDL0-00 Smart Display Link/DVI-D Transmitter 159
Automation Runtime
1A4600.10-2 B&R Automation Runtime ARwin, ARNC0 274
1A4600.10-3 B&R Automation Runtime ARwin+PVIControls incl. License Label and Security Key 274
1A4600.10-4 B&R Automation Runtime ARwin+ARNC0+PVIControls 274
Batteries
0AC201.91 Lithium batteries 4 pieces, 3 V / 950 mAh button cell Hereby we declare that the Lithium cells contained in this
shipment qualify as „partly regulated“. Handle with care. If the package is damaged, inspect cells, repack intact
cells and protect cells against short circuits. For emergency information, call RENATA SA at + 41 61 319 28 27
294
4A0006.00-000 Lithium battery, 3 V / 950 mAh, button cell 294
Bus units
5PC810.BX01-00 APC810 bus, 1 PCI 94
5PC810.BX01-01 APC810 bus, 1 PCI Express (x4) 94
5PC810.BX02-00 APC810 bus, 2 PCI 94
5PC810.BX02-01 APC810 bus, 1 PCI, 1 PCI Express (x4) 94
5PC810.BX03-00 APC810 bus, 2 PCI, 1 PCI Express (x4) 94
5PC810.BX05-00 APC810 bus, 4 PCI, 1 PCI Express (x1) 94
5PC810.BX05-01 APC810 bus, 2 PCI, 3 PCI Express (x1) 94
5PC810.BX05-02 APC810 bus, 5 PCI 94
CPU boards
5PC800.BM45-00 Intel Core2 Duo T9400 CPU board, 2.53 GHz, dual-core, 1066 MHz FSB, 6 MB L2 cache; chipset GM45; 2
sockets for SO-DIMM DDR3 modules
96
5PC800.BM45-01 Intel Core2 Duo P8400 CPU board, 2.26 GHz, dual-core, 1066 MHz FSB, 3 MB L2 Cache; chipset GM45; 2
sockets for SO-DIMM DDR3 modules
96
CompactFlash
5CFCRD.0064-03 CompactFlash 64 MB Western Digital (SLC) 311
5CFCRD.0128-03 CompactFlash 128 MB Western Digital (SLC) 311
5CFCRD.016G-04 CompactFlash 16 GB B&R (SLC) 306
5CFCRD.016G-06 CompactFlash 16 GB B&R (SLC) 301
5CFCRD.0256-03 CompactFlash 256 MB Western Digital (SLC) 311
5CFCRD.032G-06 CompactFlash 32 GB B&R (SLC) 301
5CFCRD.0512-03 CompactFlash 512 MB Western Digital (SLC) 311
5CFCRD.0512-04 CompactFlash 512 MB B&R (SLC) 306
5CFCRD.0512-06 CompactFlash 512 MB B&R (SLC) 301
5CFCRD.1024-03 CompactFlash 1 GB Western Digital (SLC) 311
5CFCRD.1024-04 CompactFlash 1 GB B&R (SLC) 306
5CFCRD.1024-06 CompactFlash 1 GB B&R (SLC) 301
5CFCRD.2048-03 CompactFlash 2 GB Western Digital (SLC) 311
5CFCRD.2048-04 CompactFlash 2 GB B&R (SLC) 306
5CFCRD.2048-06 CompactFlash 2 GB B&R (SLC) 301
5CFCRD.4096-03 CompactFlash 4 GB Western Digital (SLC) 311
5CFCRD.4096-04 CompactFlash 4 GB B&R (SLC) 306
5CFCRD.4096-06 CompactFlash 4 GB B&R (SLC) 301
5CFCRD.8192-03 CompactFlash 8 GB Western Digital (SLC) 311
5CFCRD.8192-04 CompactFlash 8 GB B&R (SLC) 306
5CFCRD.8192-06 CompactFlash 8 GB B&R (SLC) 301
DVI cable
5CADVI.0018-00 DVI-D cable, 1.8 m. 350
5CADVI.0050-00 DVI-D cable, 5 m. 350
5CADVI.0100-00 DVI-D cable, 10 m. 350
Drives
5AC801.ADAS-00 SATA hard disk adapter to operate a slide-in compact hard disk in a slide-in slot. 122
5AC801.DVDS-00 DVD-ROM SATA drive, slide-in. 126
5AC801.DVRS-00 DVD-R/RW DVD+R/RW SATA drive, slide-in. 129
5AC801.HDDI-00 40 GB SATA hard disk, slide-in compact; 24/7 hard disk with extended temperature range. Remark: Please see
manual for proper use of the hard disk.
100
5AC801.HDDI-02 160 GB SATA hard disk, slide-in compact; 24/7 hard disk with extended temperature range. Remark: Please
see manual for proper use of the hard disk.
103
General information • Overview
20 Automation PC 810 with GM45 CPU board user's manual V1.28
Product ID Short description on page
5AC801.HDDI-03 250 GB SATA hard disk, slide-in compact; 24/7 hard disk. Remark: Please see manual for proper use of the
hard disk.
105
5AC801.HDDI-04 500 GByte SATA Hard Disk, Slide-in compact, 24/7 Hard Disk Hinweis: Beachten Sie das Manual zum Einsatz
der Harddisk.
108
5AC801.HDDS-00 40 GB SATA hard disk, slide-in; 24/7 hard disk with extended temperature range. Remark: Please see manual
for proper use of the hard disk.
123
5AC801.SSDI-00 32 GB SATA SSD (SLC), Slide-in compact 110
5AC801.SSDI-01 60 GB SATA SSD (MLC), Slide-in compact 114
5AC801.SSDI-02 180 GB SATA SSD (MLC), Slide-in compact 117
5AC801.SSDI-03 60 GB SATA SSD (MLC), Slide-in compact. 120
5ACPCI.RAIC-03 PCI RAID System SATA 2x 160 GB; Remark: Please see manual for proper use of the hard disk. 132
5ACPCI.RAIC-04 160 GB SATA Hard Disk Spare part for 5ACPCI.RAIC-03; Remark: Please see manual for proper use of the
hard disk.
135
5ACPCI.RAIC-05 PCI RAID System SATA 2x 250 GB; Remark: Please see manual for proper use of the hard disk. 137
5ACPCI.RAIC-06 PCI RAID System SATA 2x 500 GByte; Hinweis: Beachten Sie das Manual zum Einsatz der Harddisk. 140
5MMHDD.0250-00 250 GB SATA hard disk replacement for 5AC801.HDDI-03 and 5ACPCI.RAIC-05; Remark: Please see manual
for proper use of the hard disk.
143
5MMHDD.0500-00 500 GB SATA hard disk replacement for 5AC801.HDDI-04, 5AC901.CHDD-01 and 5ACPCI.RAIC-06; Remark:
Please see manual for proper use of the hard disk.
145
5MMSSD.0060-00 60 GB SATA SSD (MLC); Spare part for 5AC801.SSDI-01; SSD for 5PP5IO.GMAC-00; Remark: Please see
manual for proper use of the SSD.
147
5MMSSD.0060-01 60 GByte SATA SSD (MLC); Ersatzteil für 5AC801.SSDI-03 und 5AC901.CSSD-03; SSD für 5PP5IO.GMAC-00;
Hinweis: Beachten Sie das Manual zum Einsatz der SSD.
149
5MMSSD.0180-00 180 GB SATA SSD (MLC); Spare part for 5AC801.SSDI-02; SSD for 5PP5IO.GMAC-00; Remark: Please see
manual for proper use of the SSD.
151
Fan kits
5PC810.FA01-00 APC810 fan kit for system unit 5PC810.SX01-00. 153
5PC810.FA02-01 APC810 fan kit for system unit 5PC810.SX02-00 from revision D0. 154
5PC810.FA03-00 APC810 fan kit for system unit 5PC810.SX03-00. 156
5PC810.FA05-00 APC810 fan kit for system unit 5PC810.SX05-00. 158
Kühlkörper
5AC801.HS00-01 APC810 Kühlkörper für CPU Boards mit Dual Core Prozessor T7400, T9400 und P8400. 98
MS-DOS
9S0000.01-010 OEM Microsoft MS-DOS 6.22, German Floppy disks, only available with a new PC. 265
9S0000.01-020 OEM Microsoft MS-DOS 6.22, English Floppy disks, only available with a new PC. 265
Main memory for GM45 CPU boards
5MMDDR.2048-02 SO-DIMM DDR3 RAM 2048 MB PC3-8500 99
5MMDDR.4096-02 SO-DIMM DDR3 RAM 4096 MByte PC3-8500 99
Miscellaneous
5AC900.1000-00 Adapter DVI (male) to CRT (female). For connecting a standard monitor to a DVI-I interface. 298
Other
5SWHMI.0000-00 HMI Drivers & Utilities DVD 331
RS232 cable
9A0014.02 RS232 extension cable for remote operating of a display unit with touch screen, 1.8 m. 369
9A0014.05 RS232 extension cable for remote operating of a display unit with touch screen, 5 m. 369
9A0014.10 RS232 extension cable for remote operating of a display unit with touch screen, 10 m. 369
SDL cable - 45° connector
5CASDL.0018-01 SDL cable; 45° connector, 1.8 m. 356
5CASDL.0050-01 SDL cable; 45° connector, 5 m. 356
5CASDL.0100-01 SDL cable; 45° connector, 10 m. 356
5CASDL.0150-01 SDL cable; 45° connector, 15 m. 356
SDL cables
5CASDL.0018-00 SDL cable, 1.8 m. 353
5CASDL.0050-00 SDL cable, 5 m. 353
5CASDL.0100-00 SDL cable, 10 m. 353
5CASDL.0150-00 SDL cable, 15 m. 353
5CASDL.0200-00 SDL cable, 20 m. 353
5CASDL.0250-00 SDL cable, 25 m. 353
5CASDL.0300-00 SDL cable, 30 m. 353
SDL flex cable
5CASDL.0018-03 SDL Cable flex, 1.8 m. 359
5CASDL.0050-03 SDL cable flex, 5 m. 359
5CASDL.0100-03 SDL cable flex, 10 m. 359
5CASDL.0150-03 SDL cable flex, 15 m. 359
5CASDL.0200-03 SDL cable flex, 20 m. 359
5CASDL.0250-03 SDL cable flex, 25 m. 359
5CASDL.0300-03 SDL cable flex, 30 m. 359
5CASDL.0300-13 SDL cable flex with extender, 30 m. 363
5CASDL.0400-13 SDL cable flex with extender, 40 m. 363
5CASDL.0430-13 SDL Cable flex with extender, 43 m. 363
Serial adapters
5AC600.485I-00 RS232/422/485 Interface; for APC620, APC810 and PPC700. 167
5AC600.CANI-00 CAN Interface; For APC620, APC810 or PPC700. 164
Other manuals for Automation PC 810
2
This manual suits for next models
12
Table of contents
Other B&R Controllers manuals
