Bang & Olufsen Beosound Emerge User manual

Beosound Emerge
User Guide

DOWNLOAD BANG & OLUFSEN APP
To set up your product, download the Bang & Olufsen
App from the Google Play Store or Apple App Store.
From this app you can set up your product and get
the full Bang & Olufsen experience. Unlock the full
product experience of audio personalisation, product
support and new features at your fingertips.
When you first start the Bang & Olufsen App, you will
be asked to create a user account.
To set up your speaker, click to add a new product. If
you already have an account this can be found under
settings.
ENGLISH
3

DAILY USE
Tap to play or pause
Tap on the arrows to switch tracks or your My
Stations
Control the volume by swiping along the circle.
Clockwise will turn the volume up and counter
clockwise will turn down the volume.
Tap the Bluetooth button to switch it on or off
4

FAVOURITES
Beosound Emerge has four favourite buttons, where
you can save your favourite listening experiences
RADIO
On your product page, head down to Radio and then
. Search to pick a station
. Tap the More icon to assign it to a favourite
Press the favourite button the next time you want to
. hear the station quickly
SPOTIFY CONNECT
Use Spotify Connect on the Spotify music streaming
. app to connect to your Beosound Emerge
Play a favourite radio station or playlist, like “Jazz”
or your “Discover Weekly” to the speaker via Spotify
Connect and long press your chosen favourite
. button to assign it
Access your favourite again anytime with a short
.press of the button
5

MULTIROOM
Connect your favourite music app to your Beosound
Emerge using Apple AirPlay 2, Chromecast or
Bluetooth and play wirelessly.
Use Airplay 2 or Chromecast to seamlessly connect
your different wireless speakers into one system,
allowing you to control speakers in tandam or
individually.
Long press the Bluetooth key to enable or cancel
Bluetooth pairing.
6

LIGHT INDICATOR
The light indicator shows the status of the product.
Action Meaning
White
Solid Connected to network,
ready for use
Flashing slowly Starting up
Flashing quickly Room compensation in
progress
Blue
Solid (5 sec) Connected/paired
Pulsing Open for pairing
Red
Solid Static error, please call
service
Flashing Transient error, i.e.
overheating
Amber
Solid No network connection,
connection lost
Flashing Ready for network setup
Pulse Connecting to network
Green
Pulsing Software update in progress
9

FACTORY RESET
You can restore factory settings by pressing and
holding the next and previous buttons on the top
plate at the same time for 8 seconds.
Your speaker will begin the reset process and after
approximately one minute, your Beosound Emerge
will be ready for first-time set-up again.
10