bar BAR4013C-HJ User manual
USER MANUAL
PRESSURE CLEANERS
arrma
Model Numbers: BAR4013C-HJ & BAR4013C-HEJ
BAR3513G-HJV & BAR3513G-HEJV
BAR3513G-HJVT & BAR3513G-HEJVT
Introtion
sing the Operators anual ............................................
ressure leaner...............................................................
ngine................................................................................
afet
Safety Rules.......................................................................
ooling nformation............................................................
aard Symbols and eanings.........................................
ee Ceane Cnen
omponent harts (arious odels)..................................
Assel
npack the ressure asher ...........................................
Attach andle ....................................................................
reOeration Celist
heck Oils uel ater ....................................................
onnect ose and ater Supply to ump .......................
tartin or Ceane
o to Start your ressure leaner..................................
ttin on or Ceane
o to Shut on your ressure leaner.......................
Eecc Sa On
omponent hart ............................................................
TAE O CONTENT
44
ra Tis
o to se Spray ips ........................................................
hange Spray ips ..............................................................
sage ips ..........................................................................
sin Te la oa Nole
Applying etergent ...............................................................
Trolesootin
etrol ngine rouble Shooting hart .................................
ump rouble Shooting hart ..............................................
torae
inter Storage .....................................................................
ong erm Storage ..............................................................
rotect uel System ............................................................
Storing the ngine ...............................................................
Other Storage ips ..............................................................
Te An Cnn
erms and onditions ..........................................................
TAE O CONTENTS
46
Notes
aintenance otes ...............................................................
a
aor omponents .......................................................
Warranty Statement ............................................................. 45
Attention Read through the complete
manual prior to the initial use of your
pressure asher.
NTOCTION
sin te Oerators anal
he operating manual is an important part of your pressure asher. t should
be read thoroughly before initial use and referred to often to make sure
adeuate safety and serice concerns are being addressed.
Reading the oners manual thoroughly ill help aoid any personal inury or
damage to your machine. By knoing ho best to operate this machine you
ill be better positioned to sho others ho may also operate the unit.
his manual as ritten to take you from the safety reuirements to the
operating functions of your machine. ou can refer back to the manual at any
machine at all times.
OCT IENTIICATION
f you need to contact an Authoried ealer or ustomer Serice line
for information on sericing alays proide the product
ou ill need to locate the model and serial number for the machine
and record the information in the places proided belo.
ate of rase
ealer Nae
ealer one
Moel Ner
erial Ner
riation art
nine
earo
niversal Trator Transission il
ortant arnins
ailure to obsere arnings ill oid arranty andor cause inury.
. o not let the pressure asher oerheat. cess heat ill cause seere dam
age (see belo for details).
. eer run the unit ithout ater. Running the pump dry ill cause it to uickly
fail (O OR B ARRA).
. o not let the unit freee. roen ater in the pump ill cause serious damage.
. Alays ear eye protection hen operating the unit.
. igh pressure spray can cause serious bodily inury of damage soft material.
se ith caution.
. eer adust unloader to eceed the preset pressure. remature ear euip
ment failure or inury may occur.
IMOTANT SAET INSTCTIONS
SAE TESE INSTCTIONS
AR hen using this product the folloing precautions should
alays be obsered and adhered to.
. Read all instructions before using the product.
. o reduce the risk of inury close superision is necessary hen a product is
used near children.
. no ho to stop the product and bleed pressures uickly. Be thoroughly
familiar ith the controls. See page .
4. Stay alert atch hat you are doing.
.
drugs.
6. eep operating area clear of other people.
7. o not oerreach or stand on unstable support. eep
solid footing and balance at all times.
. .
SAET
SAET RT
Motors are air oole. t is important to ensure that machine is operated in a ell
entilated area here it can dra a steady supply of fresh air. he arros belo sho
an eample of locations for air intake on an engine.
ost pumps are protected by a teral ale. he thermal ale releases ater if a
pump starts to run too hot. t ill preent catastrophic heat failure. oeer the pump
may hae suffered damage and need maintenance repair or replacement. f it does
not reset and continues to leak ater the thermal ale may need to be replaced.
THREADED
INTO PUMP
WITH TEFLON
TAPE
LEAKS WATER
TO PREVENT
OVERHEATING
T
Thermal valve
ae ae ce hen the machine is running ensure the trigger of the gun is pressed
to allo a constant flo of fresh ater into and out of the pump. n e e acne n
e an ecn en n n e e
he safety alert symbol ( ) is used ith a signal ord (AR
AO AR) a pictorial andor a safety message to alert you
to haards.
ANE indicates a haard hich if not aoided ill result in death or
serious inury.
ANIN indicates a haard hich if not aoided could result in death or
serious inury.
CATION indicates a haard hich if not aoided might result in minor or
moderate inury.
NOTICE indicates a situation that could result in euipment or property damage.
aar ols an Meanins
SA S SROS
afet Rles
his is the safety alert symbol. t is used to alert
you to potential personal inury haards. Obey all
safety messages that follo this symbol to aoid
possible inury or death.
EXPLOSION
KICKBACK
FALL FLUID INJECTION MOVING PARTS READ MANUAL
HOT SURFACE FLYING OBJECTS SLIPPERY
FIRE ELECTRIC SHOCK TOXIC FUMES
SAET
ANIN
eplosie.
ire or eplosion can cause seere burns or death.
en Ain or rainin el
en tartin Eient
en Transortin or Reairin Eient
•ransportrepair ith fuel tank or ith fuel shutoff ale O.
•isconnect spark plug ire.
en torin el or Eient it el in Tan
•Store aay from furnaces stoes ater heaters clothes dryers or other
appliances that hae pilot light or other ignition source because they can
ignite fuel apors.
SAET
his product can epose you to chemicals
including lead hich is knon to cause
cancer and birth defects or other reproductie
harm. ash hands after handling.
•urn pressure cleaner O and let it cool at least minutes before remoing
fuel cap. oosen cap sloly to reliee pressure in tank.
•ill or drain fuel tank outdoors and in accordance with the LOCAL
GOVERNMENT GUIDELINES.
•O O oerfill tank. Alays allo space for fuel epansion.
•f fuel spills ait until it eaporates before starting engine.
•eep fuel aay from sparks open flames pilot lights heat and other ignition
sources.
•O O light a cigarette or smoke.
•nsure spark plug muffler fuel cap and air cleaner are in place.
•O O crank engine ith spark plug remoed.
en eratin ient
•O O tip engine or euipment at angle hich causes fuel to spill.
•O O spray flammable liuids.
ANIN
Starter cord kickback (rapid retraction) can result in bodily inury.
ickback ill pull hand and arm toard engine faster than you can
let go.
Broken bones fractures bruises or sprains could result.
•
•hen starting engine pull cord sloly until resistance is felt and then pull
rapidly to aoid kickback.
•After each starting attempt here engine fails to run alays point spray gun
in safe direction and sueee spray gun trigger to release pressure.
•irmly grasp spray gun ith both hands hen using high pressure spray to
aoid inury hen spray gun kicks back.
ANIN
A running engine gies off carbon monoide an odorless colorless
poison gas.
Breathing carbon monoide can cause headache fatigue dii
ness omiting confusion seiures nausea fainting or death.
Some chemicals or detergents may be harmful if inhaled or ingest
ed causing seere nausea fainting or poisoning.
•Operate pressure cleaner O outdoors.
•
tion intakes or other openings.
•O O start or run engine indoors or in an enclosed area een if indos and
are open.
•se a respirator or mask heneer there is a chance that apors may be inhaled.
•Read all instructions ith mask so you are certain the mask ill proide the neces
sary protection against harmful apors.
SAET
ANIN
Risk of electrocution.
ontact ith poer source can cause electric shock
or burn.
•R spray near a poer source.
ANIN
haust heatgases can ignite combustibles structures or damage
•O O touch hot parts and AO hot ehaust gases.
•Allo euipment to cool before touching.
•eep at least feet (. m) of clearance on all sides of pressure cleaner
including oerhead.
ANIN
se of pressure cleaner can create puddles
and slippery surfaces.
ickback from spray gun can cause you to fall.
•Operate pressure cleaner from a stable surface.
•he cleaning area should hae adeuate slopes and drainage to reduce the
possibility of a fall due to slippery surfaces.
•Be etremely careful if you must use the pressure asher from a ladder
scaffolding or any other similar location.
•irmly grasp spray gun ith both hands hen using high pressure spray to
aoid inury hen spray gun kicks back.
ANIN
Risk of eye inury.
Spray can splash back or propel obects.
•Alays ear safety goggles hen using this euipment or in icinity of
here euipment is in use.
•Before starting the pressure cleaner be sure you are earing adeuate
safety goggles.
•R substitute safety glasses for safety goggles.
SAET
ANIN
Starter and other rotating parts can entangle hands
hair clothing or accessories.
•R operate pressure cleaner ithout protectie housing or coers.
•O O ear loose clothing eelry or anything that may be caught in the
starter or other rotating parts.
•ie up long hair and remoe eelry.
ANIN
he high pressure stream of ater that this euipment produces
can cut through skin and its underlying tissues leading to serious
inury and possible amputation.
Spray gun traps high ater pressure een hen engine is stopped
and ater is disconnected hich can cause inury.
•O O allo children to operate the pressure cleaner.
•R repair the high pressure hose. Replace it.
•R repair leaking connections ith sealant of any kind. Replace oring or seal.
•R connect high pressure hose to nole etension.
•eep high pressure hose connected to pump and spray gun hile system is pres
suried.
•AAS point spray gun in safe direction and sueee spray gun trigger to release
high pressure eery time you stop engine.
•R aim spray gun at people animals or plants.
•O O leae spray gun unattended hile machine is running.
•R use a spray gun hich does not hae a trigger lock or trigger guard in place
and in orking order.
•Alays be certain spray gun noles and accessories are correctly attached before
spraying ater.
SAET
NOTICE
igh pressure spray may damage fragile items including glass.
•O O point spray gun at glass hen using red spray tip.
•R aim spray gun at plants, animals or any other living thing.
NOTICE
mproper treatment of pressure asher can damage it and shorten its life.
•f you hae uestions about intended use contact your nearest authoried
dealer call our support line or isit our ebsite.
•R operate units ith broken or missing parts or ithout protectie housing
or coers.
•O O bypass any safety deice on this machine.
•O O tamper ith goerned speed.
•O O operate pressure cleaner aboe rated pressure.
•O O modify pressure cleaner in any ay.
•Before starting pressure cleaner in cold eather check all parts of the
euipment to be sure ice has not formed.
•R moe machine by pulling on hoses. se the handle proided on units
frame.
•heck fuel system for leaks or signs of deterioration such as chafed or spongy
hose loose or missing clamps and damaged tank or cap.
•orrect all defects before operating pressure cleaner.
ANIN
en Astin or an Reairs to or ressre ae Ceane
•isconnect the spark plug ire from the spark plug and place the ire here it
cannot contact spark plug.
en Testin for Enine ar
•se approed spark plug tester.
•O O check for spark ith spark plug remoed.
SAET
AC
.
.
.
.
.
he folloing diagram is intended for general reference.
our pressure cleaner may differ from the model shon belo. or
specific model information please isit .arr..a.
.
.
.
.
.
.
1. ra n ane Assel ontrols the application of ater onto cleaning
surface ith trigger deice. ncludes trigger lock. Allos you to sitch beteen
arious spray tips.
2. i ressre ose esigned to ithstand the pressure created by the pump.
3. el Tan ill tank ith regular unleaded fuel. Alays leae room for fuel
epansion. o not fill hile machine is running or hot.
4. nloaer ressure is preset at the factory.
5. eelops high pressure. onnect the garden hose to the inlet of the ater
pump and connect the high pressure hose to the outlet.
6. eterent i o pressure chemical pick up.
7. Reoil tarter sed for starting the engine manually.
8. To Coe Ro repares a cold engine for starting.
otto el ale sed to turn fuel supply on and off to engine.
9. MfflerExast Reduces noise of the engine and epels heat (AO O).
10. Air ilter rotects the engine by filtering dust and debris out of intake air.
11. Trottle leer Sets engine in starting mode for recoil starter. hen adust to
maimum speed once started.
12. Enine it Set sitch to On for recoil starting. Set sitch to Off to stop a
running engine.
13. eterent ionin ose sed to dra detergent into the lo pressure stream.
14. ra Tis etergent and for arious cleaning applications.
. .
.
Black etergent
Red Straight
ello
hite
R
.
.
.
.
.
he folloing diagram is intended for general reference.
our pressure cleaner may differ from the model shon belo. or
specific model information please isit .arr..a.
.
.
. .
.
.
1. ra n ane Assel ontrols the application of ater onto cleaning
surface ith trigger deice. ncludes trigger lock. Allos you to sitch beteen
arious spray tips.
2. i ressre ose esigned to ithstand the pressure created by the pump.
3. el Tan Fill tank ith regular unleaded fuel. Alays leae room for fuel
epansion. o not fill hile machine is running or hot.
4. nloaer ressure is preset at the factory.
5. eelops high pressure. onnect the garden hose to the inlet of the ater
pump and connect the high pressure hose to the outlet.
6. eterent i Lo pressure chemical pick up.
7. iration late onnects pump motor group to frame via anti-vibration mounts.
8. earox Reduces engine speed to 1440 rpm (slow running of pump).
9. Reoil tarter sed for starting the engine manually.
10. To Coe Ro repares a cold engine for starting.
otto el ale Used to turn fuel supply on and off to engine.
11. MfflerExast Reduces noise of the engine and epels heat (CAUTION HOT).
12. Air ilter rotects the engine by filtering dust and debris out of intake air.
13. Trottle leer Sets engine in starting mode for recoil starter. hen adust to
maimum speed once started.
14. Enine it Set sitch to On for recoil starting. Set sitch to Off to stop a
running engine.
15. eterent ionin ose - Used to dra detergent into the lo pressure stream.
16. ra Tis - etergent 0 0 and 40 : for arious cleaning applications.
. .
.
. .
Black etergent
Red Straight
ello
hite
AT
.
.
.
he folloing diagram is intended for general reference.
our pressure cleaner may differ from the model shon belo. or
specific model information please isit .arr..a.
.
.
. .
.
.
1. ra n ane Assel ontrols the application of ater onto cleaning surface
with trigger device. Includes trigger lock. Allows you to switch between various spray tips.
2. i ressre ose esigned to ithstand the pressure created by the pump.
3. el Tan ill tank ith regular unleaded fuel. Alays leae room for fuel epansion.
Do not fill while machine is running or hot.
4. nloaer ressure is preset at the factory.
5. eelops high pressure. onnect the garden hose to the ater tank as this
feeds water to the pump and connect the high pressure hose to the outlet.
6. eterent i o pressure chemical pick up.
7. iration late onnects pump motor group to frame ia antiibration mounts.
8. earox Reduces engine speed to rpm (slo running of pump).
9. Reoil tarter sed for starting the engine manually.
10. To Coe Ro repares a cold engine for starting.
otto el ale sed to turn fuel supply on and off to engine.
11. MfflerExast Reduces noise of the engine and epels heat (AO O).
12. Air ilter rotects the engine by filtering dust and debris out of intake air.
13. Trottle leer Sets engine in starting mode for recoil starter. hen adust to maimum
speed once started.
14. Enine it Set sitch to On for recoil starting. Set sitch to Off to stop a
running engine.
15. eterent ionin ose sed to dra detergent into the lo pressure stream.
16. ater Tan olds ater in resere for pump supply (must be before you start
operating).
17. ra Tis etergent and for arious cleaning applications.
NOTE ank units are fitted ith lo ater cut out and must be to use.
. .
.
. .
.
.
.
Black etergent
Red Straight
ello
hite
our pressure cleaner reuires some assembly and is ready for use after it
has been properly sericed ith the recommended oil and fuel. e
recommend AE Oil for engines. ear Oil for gearbo units
and niversal Trator Transission il for pump. See page .
f you hae any problems ith the assembly of your pressure cleaner please
call our support line. f calling for assistance please hae the model and
serial number from the data tag aailable.
na te ressre Cleaner
. Remoe the parts bag accessories and inserts included ith pressure
cleaner.
. Open bo completely by cutting each corner from top to bottom.
. nsure all contents are present prior to assembly.
Atta anle
. lace handle (A))onto handle supports (B) connected to main unit.
ake sure holes in handle align ith holes on handle supports.
NOTE hese diagrams are intended for general reference. As a result they
. nsert multicolored uick connect spray tips and other supplied accesso
ries in spaces proided on panel.
. nsert carriage bolts through holes from inside of unit and attach
nuts from outside of unit. ighten using spanner.
ASSEM
A
ollo te stes elo rior to sin te aine eer tie
. heck to ensure the engine oil is at the proper leel. se AE Oil
.
.
4. onnect and tighten the garden hose to the A (garden hose inlet)
connection.
5. onnect high pressure hose to the pump outlet. onnect the other end to
the spray gun.
ater st e trne on rior to startin te leaner ll te
sra trier to ensre ater is oin tro te lines an ot te
nole itot an leas efore startin te nit Tan nits ill not
flo ater ntil starte Tan st e fll efore startin
. Reie the safety guidelines in the manual prior to starting the unit. f you
hae any issues operating the pressure cleaner call our customer serice
line.
Connet ose an ater l to efore tartin
ANIN
O O start your pressure cleaner ithout
the ater supply turned on.
•ailure to do so ill result in damaging the pump from
oerheating and oid the arranty.
ANIN
Alays check the leel of the engine oil prior to starting
the cleaner. Oil leel of the pumpgearbo should be at
about halfay up the sight glass. f your unit does not
hae one use the oil dipstick. he leel should be about
halfay up the dipstick.
•ailure to do so could cause the engine to seie if the oil is
lo or empty.
EOEATION CECIST
heck the handle in the frame to ensure they are tight and ill not ibrate
loose.
Add fuel to the fuel tank. Be careful not to spill hile filling and do not oerfill.
Tis enine is ertifie to oerate on nleae etrol it otane ratin
of or ier
1. lace pressure cleaner near an outside ater source capable of supplying
ater at a flo rate of at least greater than the rated flo of your
pressure cleaner. t should also be no less than S at pressure cleaner
end of garden hose. O O siphon standing ater.
2. ake sure unit is in a leel position and apply handbrake (if fitted) or
"chock" wheels as needed.
3. onnect garden hose to ater inlet on pressure cleaner pump or tank.
. hoose desired spray tip pull back nole etension collar insert spray
tip and release collar. ug on spray tip to make sure it is securely in place.
See Spray Tips.
NOTICE
O O run the pump ithout the ater supply connected
and turned on.
•amage to euipment resulting from failure to follo this
instruction ill oid arranty.
STATIN O CEANE
o to tart or ressre Cleaner
o start your pressure cleaner for the first time follo these instructions step
bystep. his starting information also applies if you hae let the
pressure cleaner sit idle for at least a day.
. f your gun uses a uickconnect pull don on the collar of the uick
connect coupler slide onto the gun and let go of collar. ull on hose to
thread the connections together until secure.
. Attach the other end of the high pressure hose to high pressure outlet (A)
on pump. ull don on collar of uick connect slide onto pump and let go
of collar. ote that some pumps reuire the hose to be threaded on. ug on
the hose to ensure connection is secure.
. urn ater Supply on if you hae not already done so. oint the gun in a
safe direction and sueee the trigger to purge the pump of air and debris.
o this until ater flo is no longer erratic. ank units ill not flo ater
until started.
.
loose connections. f there are any leaks in hoses they must be replaced.
IMOTANT O O siphon standing ater for the ater supply.
se O AR only (less than ). ot ater ill damage
seals and compromise the integrity of your pump.
ANIN
he high pressure stream of ater that this
euipment produces can cut through skin and its
underlying tissues leading to serious inury and
possible amputation.
•R connect high pressure hose directly to nole etension.
•eep high pressure hose connected to pump and spray gun hile
system is pressuried.
A
B
TRIPLEX PUMP
ses AE Noneteren Mineral Oil
STATIN O CEANE
Other manuals for BAR4013C-HJ
1
This manual suits for next models
5
Table of contents
Other bar Pressure Washer manuals
