Baratza sette 270 Installation and user guide

How to: Micro Adjustment Felt Friction Pad Replacement
Sette 270, Sette 270W, Sette 270Wi
Time: 5 min
Difculty: Easy
Tools/supplies: Phillips #2 Driver
Parts: Micro Adjustment Felt (S582)
Additional Resources: N/A
*** Unplug the grinder from power supply ***
www.baratza.com suppo[email protected]m rev. 7/11/2019
ver. 1.0
Phillips
Micro Adjustment Felt (S582)

www.baratza.com suppo[email protected]m rev. 7/11/2019
Pg. 2
Remove the adjustment
assembly.
Remove the 3 Philips
screws securing the
micro adjustment ring
into the assembly.
Remove and discard the
current felt, if present.

www.baratza.com suppo[email protected]m rev. 7/11/2019
Pg. 3
Starting with one end of
the new felt, press it into
the groove in the micro
adjustment ring.
Work the strip into the
groove around the ring
until it is all seated.
The felt should protrude
slightly from the groove.
Felt protrudes roughly 1mm

www.baratza.com suppo[email protected]m rev. 7/11/2019
Pg. 4
Place the Micro
Adjustment Ring onto the
Macro Adjustment Ring
The interface is keyed.
Ensure rst that the
screen printing on the
Micro ring is aligned
with the indicator line
printed onto the Macro
ring. Then, ensure that
the screw holes on the
Micro ring align with the
screw holes on the black
interior ring in the Macro
assembly.
Secure the 3 Philips
screws.

www.baratza.com suppo[email protected]m rev. 7/11/2019
Pg. 5
If the micro adjustment
is now too tight, remove
the micro adjustment
ring and press the felt
into the groove more
rmly.
For more minor
modication of friction,
the 3 Philips screws can
be loosened or tightened
slightly.
If you have questions,
or encounter any issues
with this guide, contact
[e-mail]