Bard CompleteStat-Series CS9B-THO User manual

Model CS9B-THO and CS9BE-THO Shown
4 Models: CS9B-THO Temperature, Humidity, Occupancy
CS9B-THOC Temperature, Humidity, Occupancy, and CO2
CS9BE-THO Temperature, Humidity, Occupancy w/Ethernet Connection
CS9BE-THOC Temperature, Humidity, Occupancy, and CO2 w/Ethernet Connection
Features---All Models except as Noted:
All-in-One Multi-Function Controllers: THO models: Temperature, Humidity (dehumidification only), Occupancy
THOC models: Temperature, Humidity (dehumidification only), Occupancy and CO2 (On/Off control)
Adaptive Occupancy Scheduling:
1. Automatically learns the start of the 1st persistent occupancy for each day of the week using on-
board motion sensor to create a 7-day start of occupancy schedule
2. Continuously adapts the schedule with any changes to the usage pattern
3. Provides adaptive optimized space warm-up or cool-down with respect to the learned start of
occupancy for each day
User-friendly, high contrast, backlit LCD display with Continuous “On” option
Simple 5-Button user interface for menu-driven configuration and operation
No need for connected PC or programming
All models are BACnet capable for MS/TP, EIA-485 using shielded twisted pair for networking
BACnet is an ANSI and ISO global standard open communications protocol developed by ASHRAE
The “E” Ethernet versions offer alternate method of networking using CAT 5 port on the sub-base
9-relay output for complete and reliable HVAC system control
F or C temperature option
Conventional modes: 1H/1C, 2H/2C, 1H/2C, 2H/1C, 2H/3C if configured for economizer
Heat Pump modes: 1-Stage (2H/1C), 2-Stage (3H/2C, 3H/3C if configured for economizer)
Wide Range Occupancy Sensor: senses up to 33 feet distance, 120-degree horizontal and 100-degree vertical
sensing from controller location. Remote occupancy sensor(s) can be added for extreme applications
Built-in alarms and trend logs
Configurable password protection with 3 levels of password-protected access
Programmable (7-day, 5+2, individual days, up to 12 holidays) or non-programmable
No batteries, retains date/time settings for 72-hours during power loss
All settings except time maintained permanently in non-volatile memory until changed by user
Auto or manual changeover option
Fan Operation: Auto/On/Programmed (Programmed is On during Occupied, Auto during Un-Occupied)
Form No F1943-512
Supersedes F1943-212
Page 1 of 2
CompleteStat-Series Environmental Controllers
THO Models (Temperature, Humidity and Occupancy)
THOC Models (Temperature, Humidity, Occupancy and CO2)

Temperature Range: Cool 66-90F (19-32C), Heat 60-80F (16-27C)
Temporary Temperature Override feature: 45-minute default setting, adjustable in 5-minute increments
Humidity control: Dehumidification only, Range 50-75%, Span is 5-10%. Requires special HVAC system with
dehumidification circuit
Pre-purge capability: Span 0-7200 seconds, default is 0
CO2 control: Range 500-2000 ppm, Span 50-500 ppm
Can optionally display space humidity, CO2, and outdoor temperature
Dedicated ventilation output
Outdoor sensor option, Bard PN 8403-061, can be used to:
oLimit minimum outdoor temperature for cooling operation
oLimit minimum outdoor temperature for heat pump operation (compressor lockout)
oInhibit electric heat operation for heat pumps above selected outdoor temperature
Remote indoor sensor option, Bard PN 8403-062, can be used to with following options:
oUse remote indoor sensor only
oAverage remote indoor sensor and on-board sensor
oHighest of connected sensors
oLowest of connected sensors
Vertical mount, mounts to standard 2x4 handy-box installed vertically or horizontally
Off-white
Controller Connections: Terminal legend
Terminal Function Type Form
D
Dehumidification
Output
24VAC SPST RELAY
SC
24VAC to Relay Outputs D, A, W2
Power
A
Ventilation Call
Output
24VAC SPST RELAY
W2
2nd Stage Heating
Output
24VAC SPST RELAY
W1/E
1st Stage Heating/Emer. Heat
Output
24VAC SPST RELAY
SC
24VAC to Relay Outputs W1/E, Y2, Y1
Power
Y2
2nd Stage Compressor
Output
24VAC SPST RELAY
Y1
1st Stage Compressor
Output
24VAC SPST RELAY
Y0
Economizer
Output
24VAC SPST RELAY
SC
24VAC to Relay Outputs YO, O/B, G
Power
O/B
Reversing Valve
Output
24VAC SPST RELAY
G
Indoor Blower
Output
24VAC SPST RELAY
IN9
Not Used
ROS
Remote Occupancy Sensor
Input
Dry Contact (Input to GND)
GND
REM
Remote Temperature Sensor
Input
10K Type II Thermistor
+B
Communications
-A
Communications
OAT
Outdoor Air Temperature Sensor
Input
10K Type II Thermistor
LAS
Leaving Air Temperature Sensor
Input
10K Type II Thermistor
GND
Control Ground
L
Lockout Alarm
Input
Dry Contact (Input to GND)
Com
24VAC Common
Power
24V
24VAC Hot
Power
Bard Manufacturing Company, Inc.
Bryan, Ohio 43506
www.bardhvac.com
Form No.
F1943
May, 2012
Supersedes: F1943-212
Due to our continuous product improvement policy, all
specifications subject to change without notice.
Before purchasing this appliance, read important energy cost
and efficiency information available from your retailer.
Page 2 of 2