Antenna Assembly Diagram
Antenna Installation Diagram
BAS-1348 OMNI 2.0
QUICK USER GUIDE
TV Antenna Outdoor Omnidirectional
Version:
320х320х70
mm
0.7
kg
VHF/UHF 75 Ohm
RG-6/U
SAT-50
SAT-703
Gain VHF, max.
Gain UHF, max.
Power Supply
5V
12dB
35dB
5V
P
—
3dB
8dB
DX
12dB
35dB
5V
USB
12dB
35dB
5V
1
3
5
7
1
2
4
6
8
2
Tighten the antenna radome
Tighten the counter nut
Tighten a nuts
180°360°
~1 meter
Warranty:
Thank you for choosing the antenna outdoor BAS-1348 OMNI 2.0!
This product comes with one year warranty against any defects in labor or
materials. REMO-Technologii warrants this product is free from defects in material
and workmanship for a period of one year from date of purchase. Our obligation
under this warranty is limited to repair or replacement of any parts or workmanship
that prove to be defective upon inspection.
This warranty does not apply to normal wear and tear as well as to damages
resulting from shipment, alteration or misuse of the product.
P.O.Box 500, Saratov, 410052, Russia.
www.remo-electronics.com
It has been developed by a team of engineers determined to continue the tradition
of excellence and innovation of REMO-Technologii products. The antenna BAS-1348
OMNI 2.0 is made of high-quality materials in accordance with thoroughly detailed
design.
The antenna outdoor BAS-1348 OMNI 2.0 will provide high-quality reception of
digital television DVB-T/T2, ATSC, ISDB-T on the VHF&UHF channels together with
the modern TV sets or digital converter box (STB) and does not require orientation
to the TV transmitter due to the possibility of reception from any direction.
The antenna can be installed on a mast with a diameter up to 50 mm or a wall
bracket (when mounted on a bracket, the antenna should be above the roof ridge).
The antenna has several versions:
BAS-1348-P OMNI 2.0 – antenna does not require power
BAS-1348-5V OMNI 2.0 – antenna powering through the antenna socket of the
digital converter box (STB)
BAS-1348-USB OMNI 2.0 – antenna powering from any USB port using the injector
BAS-1348-DX OMNI 2.0 – antenna powering from its own power supply connected
to the mains electricity AC 110..230V.
The antenna is connected to the TV with an RG-6/U coaxial cable (SAT-50, SAT-703
or similar) using F-connector and F-F connector.
In the versions -USB and -DX, a USB-injector with a DIN (TV) connector is included
in the package. The antenna version -DX is additionally equipped with a power
supply unit with a USB output.
Manufacturer:
REMO-Technologii, LLC.,
